TechnicalData Sheet BERGQUIST GAP PAD TGP 3004SF Known as BERGQUIST GAP PAD 3004SF April-2019 PRODUCT DESCRIPTION TYPICAL PROPERTIES OF CURED MATERIAL High Performance, Thermally Conductive Material With Physical Properties Silicone-FreeFormulation . Hardness, Shore 00,Thirty second delay value 70 250 mil,23C ,ASTM D2240 ,Bulk rubber Technology Siliconefree Heat Capacity ,ASTM E1269,J/g-K 0.8 Appearance Lightgray Density ,Bulk rubber ,ASTM D792,g/cc 3.2 Reinforcement Carrier 0.25milPET film Flammability, UL94 V-0 Thickness ,ASTM D374 0.254 to 3.175mm ,ASTM D374 Electrical Properties Inherent Surface Tack 1 DielectricBreakdown Voltage ,ASTM D149,VAC >6,000 Application Thermalmanagement, DielectricConstant ,ASTM D150,1,000Hz 8.0 TIM(ThermalInterfaceMaterial) 11 Volume Resistivity ,ASTM D257,ohm-meter 110 Operating Temperature -40 to 125C Range Thermal Properties ThermalConductivity ,ASTM D5470,W/(m-K) 3.0 FEATURES AND BENEFITS ThermalConductivity: 3.0W/m-K Excellent thermal performance GENERAL INFORMATION Silicone-freeformulation For safe handling information on this product, consult the 0.25 mil PET provides easy disassembly, leaving no Safety Data Sheet, (SDS). residue Tacky side allows forease of handling and placement Not for product specifications The technical data contained hereinareintended as reference only. Please contact your local quality department for BERGQUIST GAP PAD TGP 3004SF highperformance,3.0 assistance and recommendations on specifications for this W/m-K, thermally conductive gap fillingmaterial.BERGQUIST product. GAP PAD TGP 3004SF is silicone-freeby design and offers exceptionally low interfacialresistances to adjacent surfaces . CONFIGURATIONS AVAILABLE BERGQUIST GAP PAD TGP 3004SF is available in the BERGQUIST GAP PAD TGP 3004SF is designed for following configurations: applications that aresilicone-sensitive .BERGQUIST GAP PAD TGP 3004SF is constructed using a 0.25 milPET filmthat Sheet form provides a no tack surface on one side and natural tack on the Die-Cut parts other side . Custom thicknesses availableupon request Natural tack both sides with fiberglass. TYPICAL APPLICATIONS Hard disk drives STORAGE HDD/SSDcombination drives Store product in the unopened container in a dry location. Medicaldevices Storage information may be indicated on the product container labeling. Optical components Laser optics Optimal Storage: 25C (3), 50% RH (10) for a 12 months HDDcase to tray shelf life.Material removed from containers may be Automotive electronics (HEV, NEV,batteries) contaminated during use. Do not return product to the original Solarenergy container. Henkel Corporation cannot assume responsibility for product which has been contaminated or stored under LEDlighting conditions other than those previously indicated. Ifadditional information is required, please contact your localTechnical Service Center or Customer Service Representative.TDS BERGQUIST GAP PAD TGP 3004SF , April-2019 Conversions (C x 1.8)+ 32 = F kV/mm x 25.4 = V/mil mm /25.4 = inches Nx 0.225= lb N/mmx 5.71= lb/in psi x 145 = N/mm MPa = N/mm Nm x 8.851 = lbin Nm x 0.738= lbft Nmm x 0.142 = ozin mPas = cP Disclaimer Note: The information provided in this Technical Data Sheet (TDS) including the recommendations for use and application of the product are based on our knowledge and experience of the product as at the date of this TDS.The product can have a variety of different applications as well as differingapplication and working conditions in your environment that are beyond our control. Henkel is, therefore,not liableforthe suitability of our product forthe production processes and conditions in respect of which you use them, as well as the intended applications and results. We strongly recommend that you carry out your own priortrials to confirmsuch suitability of our product. Any liabilityin respect of the information in the TechnicalData Sheet or any other written or oralrecommendation(s) regardingthe concerned product is excluded, except ifotherwise explicitly agreed and except in relation to death or personal injury caused by our negligenceand any liabilityunder any applicablemandatory product liabilitylaw. In case products are delivered by Henkel Belgium NV, Henkel Electronic Materials NV, Henkel Nederland BV, Henkel Technologies France SAS and Henkel France SA please additionally note the following: In case Henkel would be nevertheless held liable,on whatever legalground, Henkels liabilitywillin no event exceed the amount of the concerned delivery. In case products are delivered by Henkel Colombiana, S.A.S.the following disclaimer is applicable: The information provided in this Technical Data Sheet (TDS) including the recommendations for use and application of the product are based on our knowledge and experience of the product as at the date of this TDS. Henkel is, therefore,not liableforthe suitability of our product forthe production processes and conditions in respect of which you use them, as well as the intended applications and results. We strongly recommend that you carry out your own priortrials to confirmsuch suitability of our product. Any liabilityin respect of the information in the TechnicalData Sheet or any other written or oralrecommendation(s) regardingthe concerned product is excluded, except ifotherwise explicitly agreed and except in relation to death or personal injury caused by our negligenceand any liabilityunder any applicablemandatory product liabilitylaw. In case products are delivered by Henkel Corporation, Resin Technology Group, Inc., or Henkel Canada Corporation, the following disclaimer is applicable: The data contained hereinarefurnished forinformation only and arebelieved to be reliable.We cannot assume responsibility forthe results obtained by others over whose methods we have no control. It is the user s responsibility to determine suitability forthe user s purpose of any production methods mentioned hereinand to adopt such precautions as may be advisable forthe protection of property and of persons against any hazards that may be involved in the handling and use thereof. In lightof the foregoing,Henkel Corporation specifically disclaims all warranties expressed or implied, including warranties of merchantability or fitness for a particular purpose, arising from sale or use of Henkel Corporations products. Henkel Corporation specifically disclaims any liability for consequential or incidental damages of any kind, including lost profits. The discussion herein of various processes or compositions is not to be interpreted as representation that they are freefrom domination of patents owned by others or as a license under any Henkel Corporation patents that may cover such processes or compositions. We recommend that each prospective user test his proposed application before repetitive use, using this data as a guide. This product may be covered by one or more United States or foreignpatents or patent applications. Trademark usage: Except as otherwise noted Alltrademarks in this document are trademarks and/or registered trademarks of Henkel and its affiliatesin the U.S.and elsewhere. Reference 3 Americas Europe Asia +1.888.943.6535 +32.1457.5611 +86.21.3898.4800 For the most direct access to local sales and technical support visit: www.henkel.com/electronics