Technical Data Sheet BERGQUIST GAP PAD TGP EMI1000 Known as BERGQUIST GAP PAD EMI1.0 October -2018 PRODUCT DESCRIPTION TYPICAL PROPERTIES OF CURED MATERIAL Thermally Conductive, Conformable EMIAbsorbing Material . Young s modulus iscalculated using 0.01in/min,step rate of strain with a sample size 0.79inch. Technology Silicone Relaxation stress 40 mil. Appearance Black Reinforcement Carrier Fiberglass Physical Properties Thickness 0.508 to 3.175mm ,ASTM D374 Hardness, Shore 00 5 Inherent Surface Tack 1 ,Thirty second delay value Application Thermal management, ,ASTM D2240 ,Bulk rubber TIM(Thermal Interface Material) Heat Capacity ,ASTM E1269,J/g-K 1.3 Operating Temperature -60 to 200C Density ,Bulk rubber ,ASTM D792,g/cc 2.4 Range Flammability, UL 94 V-0 Young s Modulus ,ASTM D575 kPa 69 (psi) (10) FEATURES AND BENEFITS Thermal Conductivity: 1.0W/m-K Electrical Properties Electromagnetic Interference (EMI)absorbing Dielectric Breakdown Voltage ,ASTM D149,VAC >1,700 Highly Conformable, low hardness Dielectric Constant ,ASTM D150,1,000Hz 6.0 Fiberglass reinforced for puncture, shear and tear 10 Volume Resistivity ,ASTM D257,ohm-meter 110 resistance Electrically isolating Thermal Properties Thermal Conductivity ,ASTM D5470,W/(m-K) 1.0 BERGQUIST GAP PAD TGP EMI1000isa highlyconformable, Thermal Impedance ,0.040 inch 2 combination gap fillingmaterial offering both thermal ASTM D5470,C-in /W : conductivity performance and Electromagnetic Energy 10% Deflection 1.53 absorption (cavity resonances and/or cross-talk causing 20% Deflection 1.4 Electromagnetic Interference) at frequencies of 1GHz and 30% Deflection 1.25 higher. The material offers EMIsuppression and 1.0 W/m-K thermal conductivity performance with low assembly stress . The recorded value includes interfacial thermal resistance. The soft nature of the material enhances wet-out at the These values are provided for reference only. Actual interface resulting inbetter thermal performance than harder application performance is directly related to the surface materials with a similarperformance rating. roughness, flatnessand pressure applied. BERGQUIST GAP PAD TGP EMI1000hasan inherent, natural EMI Properties tack on one side of the material eliminating the need for Based on waveguide testing with 60 mil thickness thermally- impeding adhesive layers and allowing improved testing handlingduring placement and assembly . The other side is EMIPerformance tack-free, again enhancing handlingand rework, ifrequired . ASTM D-5568-01,dB/cm : BERGQUIST GAP PAD TGP EMI1000 is supplied with a 2.4,GHz -2.8 protective lineron the materials tacky side. 5,GHz -5.5 TYPICAL APPLICATIONS GENERAL INFORMATION Consumer electronics For safe handling information on this product, consult the Telecommunications Safety Data Sheet, (SDS). ASICs and DSPs PC applicationsTDS BERGQUIST GAP PAD TGP EMI1000, October -2018 knowledge and experience of the product as at the date of thisTDS. Henkel is, Not for product specifications therefore, not liablefor the suitability of our product for the production processes The technical data contained herein are intended as reference and conditions in respect of which you use them, as well as the intended only. Please contact your local quality department for applications and results. We strongly recommend that you carry out your own assistance and recommendations on specifications for this prior trialsto confirm such suitability of our product. Any liabilityinrespect of the information inthe Technical Data Sheet or any other product. written or oral recommendation(s) regarding the concerned product isexcluded, except ifotherwise explicitly agreed and except inrelation to death or personal injury caused by our negligence and any liabilityunder any applicable mandatory CONFIGURATIONS AVAILABLE product liabilitylaw. BERGQUIST GAP PAD TGP EMI1000 is available in the In case products are delivered by Henkel Corporation, Resin Technology following configurations: Group, Inc., or Henkel Canada Corporation, the following disclaimer is applicable: The data contained herein are furnished for information only and are believed to Sheet form be reliable. We cannot assume responsibility for the results obtained by others Die-Cut parts over whose methods we have no control. It is the user s responsibility to determine suitability for the user s purpose of any production methods mentioned Natural tack both sideswith fiberglass. herein and to adopt such precautions as may be advisable for the protection of property and of persons againstany hazards that may be involved inthe handling and use thereof. Inlight of the foregoing, Henkel Corporation specifically disclaims all warranties expressed or implied, including warranties of STORAGE merchantability or fitness for a particular purpose, arising from sale or use Store product in the unopened container in a dry location. of Henkel Corporations products. Henkel Corporation specifically disclaims any liability for consequential or incidental damages of any kind, Storage information may be indicated on the product container including lost profits. The discussion herein of various processes or labeling. compositions isnot to be interpreted as representation that they are free from domination of patents owned by others or as a license under any Henkel Optimal Storage: 25C (3), 50% RH (10) for a 12 months Corporation patents that may cover such processes or compositions. We shelf life. Material removed from containers may be recommend that each prospective user test hisproposed application before repetitive use, using thisdata as a guide. Thisproduct may be covered by one or contaminated during use. Do not return product to the original more United States or foreign patents or patent applications. container. Henkel Corporation cannot assume responsibility for Trademark usage: Except as otherwise noted Alltrademarks inthisdocument product which has been contaminated or stored under are trademarks and/or registered trademarks of Henkel and its affiliatesinthe conditions other than those previously indicated. Ifadditional U.S.and elsewhere. information is required, please contact your local Technical Service Center or Customer Service Representative. Reference 1 Conversions (C x 1.8)+ 32 = F kV/mm x 25.4 = V/mil mm /25.4 = inches Nx 0.225= lb N/mm x 5.71= lb/in psi x 145 = N/mm MPa = N/mm Nm x 8.851 = lbin Nm x 0.738= lbft Nmm x 0.142 = ozin mPas = cP Disclaimer Note: The information provided in this Technical Data Sheet (TDS) including the recommendations for use and application of the product are based on our knowledge and experience of the product as at the date of thisTDS.The product can have a variety of different applications as well as differingapplication and working conditions inyour environment that are beyond our control. Henkel is, therefore, not liablefor the suitability of our product for the production processes and conditions in respect of which you use them, as well as the intended applications and results. We strongly recommend that you carry out your own prior trialsto confirm such suitability of our product. Any liabilityinrespect of the information inthe Technical Data Sheet or any other written or oral recommendation(s) regarding the concerned product isexcluded, except ifotherwise explicitly agreed and except inrelation to death or personal injury caused by our negligence and any liabilityunder any applicable mandatory product liabilitylaw. In case products are delivered by Henkel Belgium NV, Henkel Electronic Materials NV, Henkel Nederland BV, Henkel Technologies France SAS and Henkel France SA please additionally note the following: Incase Henkel would be nevertheless held liable,on whatever legal ground, Henkels liabilitywill inno event exceed the amount of the concerned delivery. In case products are delivered by Henkel Colombiana, S.A.S.the following disclaimer is applicable: The information provided in this Technical Data Sheet (TDS) including the recommendations for use and application of the product are based on our Americas Europe Asia +1.888.943.6535 +32.1457.5611 +86.21.3898.4800 For the most direct access to local sales and technical support visit: www.henkel.com/electronics