TechnicalData Sheet BERGQUIST GAP PAD TGP 800VO Known as BERGQUIST GAP PAD VO October -2018 PRODUCT DESCRIPTION TYPICAL PROPERTIES OF CURED MATERIAL Conformable, Thermally Conductive Materialfor FillingAir Young s modulus is calculated using 0.01in/min,step rate of Gaps . strain with a sample size 0.79inch. Physical Properties Technology Silicone Hardness, Shore 00,Thirty second delay value , 40 Appearance Gold /Pink ASTM D2240 ,Bulk rubber Reinforcement CarrierSil-Pad Heat Capacity ,ASTM E1269,J/g-K 1.0 Thickness 0.508 to 6.35mm ,ASTM D374 Density ,Bulk rubber ,ASTM D792,g/cc 1.6 Inherent Surface Tack 1 (1 or 2 sided ) Flammability, UL94 V-0 Application Thermalmanagement, Young s Modulus ,ASTM D575 kPa 689 TIM(ThermalInterfaceMaterial) (psi) ( 100) Operating Temperature -60 to 200C Range Electrical Properties DielectricBreakdown Voltage ,ASTM D149,VAC >6,000 DielectricConstant ,ASTM D150,1,000Hz 5.5 FEATURES AND BENEFITS 11 Volume Resistivity ,ASTM D257,ohm-meter 110 ThermalConductivity: 0.8W/m-K Enhanced puncture, shear and tear resistance Thermal Properties Conformable gapfillingmaterial ThermalConductivity ,ASTM D5470 ,W/(m-K) 0.8 Electricallyisolating BERGQUIST GAP PAD TGP 800VO is a cost-effective, GENERAL INFORMATION thermally conductive interfacematerial.The materialis a filled, For safe handling information on this product, consult the thermally conductive polymer supplied on a rubber- coated Safety Data Sheet, (SDS). fiberglass carrierallowing foreasy materialhandling. Not for product specifications The conformable nature of BERGQUIST GAP PAD TGP The technical data contained hereinareintended as reference 800VO allows the pad to fillin airgaps between PC boards and only. Please contact your local quality department for heat sinks or a metal chassis . assistance and recommendations on specifications for this product. TYPICAL APPLICATIONS CONFIGURATIONS AVAILABLE Telecommunications BERGQUIST GAP PAD TGP 800VO is available in the Computer and peripherals following configurations: Power conversion Between heat-generating semiconductors and a heat sink Sheet form Area where heat needs to be transferred to a frame, Die-Cut parts chassis, or other type of heat spreader Natural tack both sides with fiberglass. Between heat-generating magnetic components and a heat sinkTDS BERGQUIST GAP PAD TGP 800VO , October -2018 merchantability or fitness for a particular purpose, arising from sale or use STORAGE of Henkel Corporations products. Henkel Corporation specifically Store product in the unopened container in a dry location. disclaims any liability for consequential or incidental damages of any kind, Storage information may be indicated on the product container including lost profits. The discussion herein of various processes or compositions is not to be interpreted as representation that they are freefrom labeling. domination of patents owned by others or as a license under any Henkel Corporation patents that may cover such processes or compositions. We Optimal Storage: 25C (3), 50% RH (10) for a 12 months recommend that each prospective user test his proposed application before shelf life.Material removed from containers may be repetitive use, using this data as a guide. This product may be covered by one or contaminated during use. Do not return product to the original more United States or foreignpatents or patent applications. container. Henkel Corporation cannot assume responsibility for Trademark usage: Except as otherwise noted Alltrademarks in this document are trademarks and/or registered trademarks of Henkel and its affiliatesin the product which has been contaminated or stored under U.S.and elsewhere. conditions other than those previously indicated. Ifadditional information is required, please contact your localTechnical Service Center or Customer Service Representative. Reference 1 Conversions (C x 1.8)+ 32 =F kV/mm x 25.4 =V/mil mm /25.4 =inches N x 0.225=lb N/mm x 5.71=lb/in psi x 145 =N/mm MPa =N/mm Nm x 8.851 = lbin Nm x 0.738=lbft Nmm x 0.142 =ozin mPas =cP Disclaimer Note: The information provided in this Technical Data Sheet (TDS) including the recommendations for use and application of the product are based on our knowledge and experience of the product as at the date of this TDS. The product can have a variety of different applications as well as differingapplication and working conditions in your environment that are beyond our control. Henkel is, therefore,not liableforthe suitability of our product forthe production processes and conditions in respect of which you use them, as well as the intended applications and results. We strongly recommend that you carry out your own priortrials to confirmsuch suitability of our product. Any liabilityin respect of the information in the TechnicalData Sheet or any other written or oralrecommendation(s) regardingthe concerned product is excluded, except ifotherwise explicitly agreed and except in relation to death or personal injury caused by our negligenceand any liabilityunder any applicablemandatory product liabilitylaw. In case products are delivered by Henkel Belgium NV, Henkel Electronic Materials NV, Henkel Nederland BV, Henkel Technologies France SAS and Henkel France SA please additionally note the following: In case Henkel would be nevertheless held liable,on whatever legalground, Henkels liabilitywillin no event exceed the amount of the concerned delivery. In case products are delivered by Henkel Colombiana, S.A.S.the following disclaimer is applicable: The information provided in this Technical Data Sheet (TDS) including the recommendations for use and application of the product are based on our knowledge and experience of the product as at the date of this TDS. Henkel is, therefore,not liableforthe suitability of our product forthe production processes and conditions in respect of which you use them, as well as the intended applications and results. We strongly recommend that you carry out your own priortrials to confirmsuch suitability of our product. Any liabilityin respect of the information in the TechnicalData Sheet or any other written or oralrecommendation(s) regardingthe concerned product is excluded, except ifotherwise explicitly agreed and except in relation to death or personal injury caused by our negligenceand any liabilityunder any applicablemandatory product liabilitylaw. In case products are delivered by Henkel Corporation, Resin Technology Group, Inc., or Henkel Canada Corporation, the following disclaimer is applicable: The data contained hereinarefurnished forinformation only and arebelieved to be reliable.We cannot assume responsibility forthe results obtained by others over whose methods we have no control. It is the user s responsibility to determine suitability forthe user s purpose of any production methods mentioned hereinand to adopt such precautions as may be advisable forthe protection of property and of persons against any hazards that may be involved in the handling and use thereof. In lightof the foregoing,Henkel Corporation specifically disclaims all warranties expressed or implied, including warranties of Americas Europe Asia +1.888.943.6535 +32.1457.5611 +86.21.3898.4800 For the most direct access to local sales and technical support visit: www.henkel.com/electronics