TechnicalDataSheet BERGQUIST GAP PAD TGP 1000VOUSB Known as BERGQUIST GAP PAD VO ULTRA SOFT-B November -2018 PRODUCT DESCRIPTION TYPICAL PROPERTIES OF CURED MATERIAL UltraConformable,Thermally Conductive Materialfor FillingAir Physical Properties Gaps . Hardness, Shore 00,Thirty second delay value , 5 ASTM D2240 ,Bulk rubber Technology Silicone HeatCapacity,ASTM E1269,J/g-K 1.0 Appearance Black Density ,Bulk rubber ,ASTM D792,g/cc 1.6 Reinforcement Carrier Fiberglass Flammability, UL94 V-0 (1) Thickness ,ASTM D374 0.508 to3.175mm Young s Modulus ,ASTM D575 kPa 55 (psi) (8) InherentSurface Tack 1 (1 sided ) Application Thermal management, TIM(Thermal InterfaceMaterial) Electrical Properties Operating Temperature -60 to200C DielectricBreakdown Voltage ,ASTM D149,VAC 6,000 Range DielectricConstant,ASTM D150,1,000Hz 5.5 11 Volume Resistivity,ASTM D257,ohm-meter 110 FEATURES AND BENEFITS Thermal Properties Thermal Conductivity: 1.0W/m-K Thermal Conductivity ,ASTM D5470 ,W/(m-K) 1.0 HighlyConformable, low hardness Thermal Impedance Gel-likemodulus 2 ASTM D5470 ,C-in /W: Decreased strain 0.040 : Puncture, shear and tearresistant 10% Deflection 1.97 Electricallyisolating 20% Deflection 1.87 30% Deflection 1.68 BERGQUIST GAP PAD TGP 1000VOUSB is recommended for applicationsthatrequire a minimum amount of pressure on 1.016mm : components .The viscoelasticnature of thematerialalso gives 10% Deflection 12.7 excellentlow-stress vibration dampening and shock absorbing 20% Deflection 12.1 characteristics. 30% Deflection 10.8 BERGQUIST GAP PAD TGP 1000VOUSB is an electrically isolatingmaterial,which allows itsuse in applicationsrequiring (1) Youngs Modulus, calculated using 0.01in/min.step rateof strain with a sample size of isolation between eat sinks and high-voltage,bare-leaded 0.79inch devices . (2) The ASTM D5470 testfixture was utilized. The recorded values include the interfacial thermal resistance. The values are provided for reference only. Actual application performance is directlyrelatedtothesurface roughness, flatnessand pressure applied TYPICAL APPLICATIONS GENERAL INFORMATION Various ICpackages For safe handling information on this product, consult the Telecommunications Safety Data Sheet, (SDS). Between any heat- generatingsemiconductor and a heat sink Not for product specifications Automotive The technicaldata contained herein are intended as reference LEDlightingpackages only. Please contact your local quality department for Computer and peripherals assistance and recommendations on specificationsfor this product.TDS BERGQUIST GAP PAD TGP 1000VOUSB , November -2018 injury caused by our negligenceand any liabilityunder any applicablemandatory CONFIGURATIONS AVAILABLE product liabilitylaw. BERGQUIST GAP PAD TGP 1000VOUSB is available in the In case products are delivered by Henkel Corporation, Resin Technology following configurations: Group, Inc., or Henkel Canada Corporation, the following disclaimer is applicable: Sheet form The data contained herein are furnished for information only and are believed to be reliable.We cannot assume responsibility for theresults obtained by others Die-Cutparts over whose methods we have no control. Itis the user s responsibility to determine suitabilityfor theuser s purpose of any production methods mentioned Natural tackboth sides with fiberglass. herein and to adopt such precautions as may be advisable for theprotectionof property and of persons againstany hazards thatmay be involved in thehandling and use thereof.In lightof the foregoing,Henkel Corporation specifically disclaims all warranties expressed or implied, including warranties of STORAGE merchantability or fitness for a particular purpose, arising from sale or use Store product in the unopened container in a dry location. of Henkel Corporations products. Henkel Corporation specifically disclaims any liability for consequential or incidental damages of any kind, Storage information may be indicated on theproduct container including lost profits. The discussion herein of various processes or labeling. compositions is not to be interpretedas representation thatthey are free from domination of patents owned by others or as a license under any Henkel Optimal Storage:25C (3), 50% RH (10) for a 12 months Corporation patents thatmay cover such processes or compositions. We shelf life.Materialremoved from containers may be recommend thateach prospective user testhis proposed applicationbefore repetitiveuse, using thisdata as a guide. This product may be covered by one or contaminated during use. Do not return product to theoriginal more United Statesor foreignpatentsor patentapplications. container.Henkel Corporation cannot assume responsibility for Trademark usage: Exceptas otherwise noted Alltrademarks in thisdocument product which has been contaminated or stored under are trademarks and/or registeredtrademarks of Henkel and itsaffiliatesin the conditions other than those previously indicated.Ifadditional U.S.and elsewhere. information is required, please contact your localTechnical Service Centeror Customer Service Representative. Reference 1 Conversions (C x 1.8)+ 32 =F kV/mm x 25.4 =V/mil mm /25.4 =inches N x 0.225=lb N/mm x 5.71=lb/in psi x 145 =N/mm MPa =N/mm Nm x 8.851 = lbin Nm x 0.738=lbft Nmm x 0.142 =ozin mPas =cP Disclaimer Note: The information provided in this Technical Data Sheet (TDS) including the recommendations for use and applicationof the product are based on our knowledge and experience of theproduct as atthedate of thisTDS. The product can have a variety of differentapplicationsas well as differingapplicationand working conditions in your environment thatare beyond our control.Henkel is, therefore,not liablefor thesuitabilityof our product for theproduction processes and conditions in respect of which you use them, as well as the intended applicationsand results. We strongly recommend thatyou carry out your own prior trialstoconfirm such suitabilityof our product. Any liabilityin respectof theinformation in theTechnicalDataSheet or any other written or oral recommendation(s) regarding theconcerned product is excluded, except ifotherwise explicitlyagreed and except in relationto death or personal injury caused by our negligenceand any liabilityunder any applicablemandatory product liabilitylaw. In case products are delivered by Henkel Belgium NV, Henkel Electronic Materials NV, Henkel Nederland BV, Henkel Technologies France SAS and Henkel France SA please additionally note the following: In case Henkel would be nevertheless held liable,on whatever legalground, Henkels liabilitywillin no event exceed theamount of theconcerned delivery. In case products are delivered by Henkel Colombiana, S.A.S.the following disclaimer is applicable: The information provided in this Technical Data Sheet (TDS) including the recommendations for use and applicationof the product are based on our knowledge and experience of theproduct as atthedate of thisTDS. Henkel is, therefore,not liablefor thesuitabilityof our product for theproduction processes and conditions in respect of which you use them, as well as the intended applicationsand results. We strongly recommend thatyou carry out your own prior trialstoconfirm such suitabilityof our product. Any liabilityin respectof theinformation in theTechnicalDataSheet or any other written or oral recommendation(s) regarding theconcerned product is excluded, except ifotherwise explicitlyagreed and except in relationto death or personal Americas Europe Asia +1.888.943.6535 +32.1457.5611 +86.21.3898.4800 For the most direct access to local sales and technical support visit: www.henkel.com/electronics