Technical Data Sheet BERGQUIST HI FLOW THF 1600P Known as BERGQUIST HI-FLOW 300P April -2020 Physical Properties PRODUCT DESCRIPTION Electrically Insulating, Thermally Conductive Phase Change Elongation ,ASTM D882A,% 40 Material . Tensile Strength ,ASTM D882A,MPa 48 Phase Change Temperature ,ASTM D3418,C 55 Technology Phase Change Flammability Rating, UL 94 V-0 Appearance Green Reinforcement Carrier Polyimide Electrical Properties Total Thickness 0.102 to 0.127 mm Dielectric Breakdown Voltage ,ASTM D149,VAC 5,000 ,ASTM D374 Dielectric Constant ,ASTM D150 1,000 Hz 4.5 12 FilmThickness 0.025 to 0.05 mm Volume Resistivity ,ASTM D257,ohm-meter 110 ,ASTM D374 Thermal Properties Application Thermal management, (1) Thermal Conductivity ,ASTM D5470,W/(m-K) 1.6 Thermally conductive adhesive Operating Temperature 150 C Thermal Performance vs. Pressure TO-220 Thermal Performance ,C/W FEATURES AND BENEFITS 0.001 2 Thermal impedance: 0.13C-in /W 25 psi 10 psi 0.95 Field-proven polyimide film 25 psi 0.94 -excellent dielectric performance 50 psi 0.92 -excellent cut-through resistance 100 psi 0.91 Outstanding thermal performance in an insulated pad 200 psi 0.9 TYPICAL APPLICATIONS 0.0015 Spring/clip mounted 10 psi 1.19 Discrete power semiconductors and modules 25 psi 1.17 50 psi 1.16 BERGQUIST HIFLOW THF 1600P consists of a thermally 100 psi 1.14 conductive 55C phase change compound coated on a thermally conductive polyimide film. The polyimide 200 psi 1.12 reinforcement makes the material easy to handle and the 55C 0.002 phase change temperature minimizes shipping and handling 10 psi 1.38 problems . 25 psi 1.37 BERGQUIST HIFLOW THF 1600P achieves superior values 50 psi 1.35 in voltage breakdown and thermal performance when 100 psi 1.33 compared to its competition . The product is supplied on an 200 psi 1.32 easy release liner for exceptional handling in highvolume manual assemblies . 2 (2) Thermal Impedance ,ASTM D5470,C-in /W BERGQUIST HIFLOW THF 1600P is designed for use as a 0.001 thermal interface material between electronic power devices 10 psi 0.13 requiring electrical isolation to the heat sink . 25 psi 0.13 Bergquist suggests the use ofspring clips to assure constant 50 psi 0.12 pressure with the interface and power source .Please refer to 100 psi 0.12 thermal performance data to determine nominal spring 200 psi 0.12 pressure for your application . TYPICAL PROPERTIESTDS BERGQUIST HIFLOW THF 1600P, April -2020 product liability law. 0.0015 In case products are delivered by Henkel Belgium NV, Henkel Electronic 10 psi 0.17 Materials NV,Henkel Nederland BV,Henkel Technologies France SAS and 25 psi 0.16 Henkel France SA please additionally note the following: In case Henkel would be nevertheless heldliable,on whatever legal ground, 50 psi 0.16 Henkels liability will in no event exceed the amount ofthe concerned delivery. 100 psi 0.16 In case products are delivered by Henkel Colombiana, S.A.S.the following disclaimer is applicable: 200 psi 0.15 The information provided in this Technical Data Sheet (TDS) including the recommendations for use and application of the product are based on our 0.002 knowledge and experience ofthe product as at the date ofthis TDS. Henkel is, 10 psi 0.19 therefore, not liable for the suitability ofour product for the production processes and conditions in respect of which you use them, as well as the intended 25 psi 0.19 applications and results. We strongly recommend that you carry out your own 50 psi 0.19 prior trials to confirm such suitability ofour product. Any liability in respect ofthe information in the Technical Data Sheet or any other 100 psi 0.18 written or oral recommendation(s) regarding the concerned product is excluded, 200 psi 0.18 except ifotherwise explicitly agreed and except in relation to death or personal injury caused by our negligence and any liability under any applicable mandatory product liability law. In case products are delivered by Henkel Corporation, Resin Technology 1) This is the measured thermal conductivity of the Hi-Flow coating. It represents one Group, Inc., or Henkel Canada Corporation, the following disclaimer is conducting layer in a three- layer laminate. The Hi-Flow coatings are phase change applicable: compounds. These layers will respond to heat and pressure induced stresses. The overall The data contained herein are furnished for information only and are believed to conductivity ofthe material in post-phase change, thin filmproducts is highly dependent upon be reliable. We cannot assume responsibility for the results obtained by others the heat and pressure applied. This characteristic is not accounted for in ASTM D5470. Please contact Bergquist Product Management ifadditional specifications are required. over whose methods we have no control. It is the user s responsibility to 2) The ASTM D5470test fixture was used and the test sample was conditioned at 70Cprior determine suitability for the user s purpose ofany production methods mentioned to test. The recorded value includes interfacial thermal resistance. These values are provided herein and to adopt such precautions as may be advisable for the protection of for reference only. Actual application performance is directly related to the surface roughness, property and ofpersons against any hazards that may be involved in the handling flatness and pressure applied. and use thereof. In light of the foregoing, Henkel Corporation specifically disclaims all warranties expressed or implied, including warranties of merchantability or fitness for a particular purpose, arising from sale or use of Henkel Corporations products. Henkel Corporation specifically GENERAL INFORMATION disclaims any liability for consequential or incidental damages of any kind, For safe handling information on this product, consult the Safety including lost profits. The discussion herein of various processes or Data Sheet, (SDS). compositions is not to be interpreted as representation that they are free from domination of patents owned by others or as a license under any Henkel Not for product specifications Corporation patents that may cover such processes or compositions. We recommend that each prospective user test his proposed application before The technical data contained herein are intended as reference repetitive use, using this data as a guide. This product may be covered by one or only. Please contact your local quality department for more United States or foreign patents or patent applications. assistance and recommendations on specifications for this Trademark usage product. Except as otherwise noted, all trademarks in this document are trademarks of Henkel Corporation in the U.S. and elsewhere. denotes a trademark registered in the U.S. Patent and Trademark Office. CONFIGURATIONS AVAILABLE BERGQUIST HIFLOW THF 1600P is supplied in: Reference N/A Rollform, die-cut parts and sheet form, dry both sides Conversions (C x 1.8)+ 32 = F kV/mm x 25.4 = V/mil mm /25.4 = inches N x 0.225 = lb/F N/mm x 5.71= lb/in psi x 145 = N/mm MPa = N/mm Nm x 8.851 = lbin Nm x 0.738= lbft Nmm x 0.142= ozin mPas = cP Disclaimer Note: The information provided in this Technical Data Sheet (TDS) including the recommendations for use and application of the product are based on our knowledge and experience ofthe product as at the date ofthis TDS. The product can have a variety of different applications as well as differing application and working conditions in your environment that are beyond our control. Henkel is, therefore, not liable for the suitability ofour product for the production processes and conditions in respect of which you use them, as well as the intended applications and results. We strongly recommend that you carry out your own prior trials to confirm such suitability ofour product. Any liability in respect ofthe information in the Technical Data Sheet or any other written or oral recommendation(s) regarding the concerned product is excluded, except if otherwise explicitly agreed and except in relation to death or personal injury caused by our negligence and any liability under any applicable mandatory Americas Europe Asia +1.888.943.6535 +32.1457.5611 +86.21.2891.8000 For the most direct access to local sales and technical support visit: www.henkel.com/electronics