Technical Data Sheet BERGQUIST HI FLOW THF 1500P Known as BERGQUIST HI-FLOW 650P April -2020 PRODUCT DESCRIPTION Flammability Rating, UL 94 V-0 Electrically Insulating, High Performance, Thermally Electrical Properties Conductive Phase Change Material . Dielectric Breakdown Voltage ,ASTM D149,Vac 5,000 Technology Phase Change Dielectric Constant ,ASTM D150 1,000 Hz 4.5 Appearance Gold 12 Volume Resistivity ,ASTM D257,ohm-meter 110 Reinforcement Carrier Polyimide Thermal Properties Total Thickness 0.114 to 0.14mm (1) Thermal Conductivity ,ASTM D5470,W/(m-K) 1.5 ,ASTM D374 FilmThickness 0.025 to 0.05 mm Thermal Performance vs. Pressure ,ASTM D374 TO-220 Thermal Performance ,C/W Inherent Surface Tack 1 (1 or 2 side ) 0.001 Application Thermal management, 10 psi 1.2 Thermally conductive adhesive 25 psi 1.15 Operating Temperature -40 to 150 C 50 psi 1.11 Range 100 psi 1.06 FEATURES AND BENEFITS 200 psi 1.0 2 Thermal impedance: 0.2C-in /W 25 psi 0.0015 150 C hightemperature reliability 10 psi 1.47 Natural tack one side for ease ofassembly 25 psi 1.41 Exceptional thermal performance in an insulated pad 50 psi 1.37 TYPICAL APPLICATIONS 100 psi 1.33 Spring/clip- mounted devices 200 psi 1.29 Discrete power semiconductors and modules 0.002 BERGQUIST HIFLOW THF 1500P is a thermally conductive 10 psi 1.59 phase change material, reinforced with a polyimide filmthat is 25 psi 1.48 naturally tacky on one side .The polyimide filmprovides a high 50 psi 1.43 dielectric strength and cut-through resistance .BERGQUIST HI 100 psi 1.38 FLOW THF 1500P offers hightemperature reliability ideal for 200 psi 1.35 automotive applications . 2 (2) BERGQUIST HI FLOW THF 1500P is designed for use Thermal Impedance ,ASTM D5470,C-in /W between a high-power electrical device requiring electrical 0.001 isolation from the heat sink and is ideal for automated 10 psi 0.21 dispensing systems . 25 psi 0.2 Bergquist recommends the use of spring clips to assure 50 psi 0.19 constant pressure with the component interface and the heat 100 psi 0.18 sink .Please refer to the TO-220 thermal performance data to 200 psi 0.17 determine the nominal spring pressure for your application . 0.0015 10 psi 0.23 TYPICAL PROPERTIES 25 psi 0.22 Physical Properties 50 psi 0.21 Elongation ,45 to warp and fill,ASTM D882,% 40 100 psi 0.2 Tensile Strength ASTM D882A,psi 7,000 Phase Change Temperature ,ASTM D3418,C 52TDS BERGQUIST HIFLOW THF 1500P , April -2020 In case products are delivered by Henkel Colombiana, S.A.S.the following 200 psi 0.2 disclaimer is applicable: The information provided in this Technical Data Sheet (TDS) including the 0.002 recommendations for use and application of the product are based on our 10 psi 0.27 knowledge and experience ofthe product as at the date ofthis TDS. Henkel is, therefore, not liable for the suitability ofour product for the production processes 25 psi 0.27 and conditions in respect of which you use them, as well as the intended 50 psi 0.26 applications and results. We strongly recommend that you carry out your own prior trials to confirm such suitability ofour product. 100 psi 0.25 Any liability in respect ofthe information in the Technical Data Sheet or any other 200 psi 0.24 written or oral recommendation(s) regarding the concerned product is excluded, except ifotherwise explicitly agreed and except in relation to death or personal injury caused by our negligence and any liability under any applicable mandatory product liability law. 1) This is the measured thermal conductivity of the Hi-Flow coating. It represents one In case products are delivered by Henkel Corporation, Resin Technology conducting layer in a three- layer laminate. The Hi-Flow coatings are phase change Group, Inc., or Henkel Canada Corporation, the following disclaimer is compounds. These layers will respond to heat and pressure induced stresses. The overall applicable: conductivity ofthe material in post-phase change, thin filmproducts is highly dependent upon The data contained herein are furnished for information only and are believed to the heat and pressure applied. This characteristic is not accounted for in ASTM D5470. be reliable. We cannot assume responsibility for the results obtained by others Please contact Bergquist Product Management ifadditional specifications are required. over whose methods we have no control. It is the user s responsibility to 2) The ASTM D5470test fixture was used and the test sample was conditioned at 70Cprior to test. The recorded value includes interfacial thermal resistance. These values are provided determine suitability for the user s purpose ofany production methods mentioned for reference only. Actual application performance is directly related to the surface roughness, herein and to adopt such precautions as may be advisable for the protection of flatness and pressure applied. property and ofpersons against any hazards that may be involved in the handling and use thereof. In light of the foregoing, Henkel Corporation specifically disclaims all warranties expressed or implied, including warranties of merchantability or fitness for a particular purpose, arising from sale or use GENERAL INFORMATION of Henkel Corporations products. Henkel Corporation specifically For safe handling information on this product, consult the Safety disclaims any liability for consequential or incidental damages of any kind, Data Sheet, (SDS). including lost profits. The discussion herein of various processes or compositions is not to be interpreted as representation that they are free from Not for product specifications domination of patents owned by others or as a license under any Henkel Corporation patents that may cover such processes or compositions. We The technical data contained herein are intended as reference recommend that each prospective user test his proposed application before only. Please contact your local quality department for repetitive use, using this data as a guide. This product may be covered by one or assistance and recommendations on specifications for this more United States or foreign patents or patent applications. product. Trademark usage Except as otherwise noted, all trademarks in this document are trademarks of Henkel Corporation in the U.S. and elsewhere. denotes a trademark registered CONFIGURATIONS AVAILABLE in the U.S. Patent and Trademark Office. BERGQUIST HIFLOW THF 1500P are supplied in: Sheet form, roll form and die-cut parts Reference 2 Available with 1.0,1.5 or 2.0mil Polyimide reinforcement carrier Conversions (C x 1.8)+ 32 = F kV/mm x 25.4 = V/mil mm /25.4 = inches N x 0.225 = lb/F N/mm x 5.71= lb/in psi x 145 = N/mm MPa = N/mm Nm x 8.851 = lbin Nm x 0.738= lbft Nmm x 0.142= ozin mPas = cP Disclaimer Note: The information provided in this Technical Data Sheet (TDS) including the recommendations for use and application of the product are based on our knowledge and experience ofthe product as at the date ofthis TDS. The product can have a variety of different applications as well as differing application and working conditions in your environment that are beyond our control. Henkel is, therefore, not liable for the suitability ofour product for the production processes and conditions in respect of which you use them, as well as the intended applications and results. We strongly recommend that you carry out your own prior trials to confirm such suitability ofour product. Any liability in respect ofthe information in the Technical Data Sheet or any other written or oral recommendation(s) regarding the concerned product is excluded, except if otherwise explicitly agreed and except in relation to death or personal injury caused by our negligence and any liability under any applicable mandatory product liability law. In case products are delivered by Henkel Belgium NV, Henkel Electronic Materials NV,Henkel Nederland BV,Henkel Technologies France SAS and Henkel France SA please additionally note the following: In case Henkel would be nevertheless heldliable,on whatever legal ground, Henkels liability will in no event exceed the amount ofthe concerned delivery. Americas Europe Asia +1.888.943.6535 +32.1457.5611 +86.21.2891.8000 For the most direct access to local sales and technical support visit: www.henkel.com/electronics