Technical Data Sheet BERGQUIST LIQUI BOND TLB SA1000 BERGQUIST LIQUI-BOND SA 1000 January -2019 PRODUCT DESCRIPTION TYPICAL PROPERTIES OF UNCURED MATERIAL Thermally Conductive, One-Part, Liquid Silicone Adhesive . Viscosity ,Brookfield -RV , -Helipath ,ASTM D2196,25 C, mPas (cP) : SpindleTF,speed 20 rpm 125,000 Technology Silicone Density ,ASTM D792,g/cc 2.4 Appearance Black Cure Heat cure ShelfLife 10C ,months 6 Pot life 25 C ,based on 1/8 diameter bead , 10 Application Thermal management, hours TIM(Thermal Interface Material) Operating Temperature -60 to 200C Range TYPICAL CURE SCHEDULE UL Flammability Rating UL 94 V-0 Cure Schedule 20 minutes 125C or FEATURES AND BENEFITS 10 minutes 150C Highthermal performance Time after cure temperature is achieved at the interface. Eliminates need for mechanical fasteners Ramp time is application dependent. Low viscosity for ease of screening or stenciling Can achieve a very thin bond line Mechanical and chemical stability TYPICAL PROPERTIES OF CURED MATERIAL Maintains structural bond insevere environment Physical Properties applications Hardness, Shore A 75 Heat cure ASTM D2240 Electrical Properties BERGQUIST LIQUI BOND TLB SA1000 is a thermally Dielectric Strength ,ASTM D149,V/mm 10,000 conductive, one-part liquid silicone adhesive with a low Dielectric Constant ,ASTM D150,1,000Hz 5.5 viscosity for easy screenability . BERGQUIST LIQUI BOND 10 TLB SA1000 features a high thermal performance and Volume Resistivity ,ASTM D257,ohm-meter 110 maintains its structure even in severe environment Thermal Properties applications . Thermal Conductivity ,ASTM D5470 ,W/(m-K) 1.0 BERGQUIST LIQUIBOND TLB SA1000 features excellent low and high-temperature mechanical and chemical stability . The materials mild elastic properties assist in relieving CTE TYPICAL PERFORMANCE OF CURED MATERIAL stresses during thermal cycling . Shear Strength BERGQUIST LIQUI BOND TLB SA1000 contains no cure Shear Strength ,ASTM D1002 MPa 1.4 by-products, cures at elevated temperatures and requires (psi) ( 200) refrigeration storage at 10C .The material is available inboth tube and mid-sized container forms . GENERAL INFORMATION For safe handling information on this product, consult the Safety Data Sheet, (SDS). TYPICAL APPLICATIONS PCBA to housing Not for product specifications Discrete component to heat spreader The technical data contained herein are intended as reference only. Please contact your local quality department for assistance and recommendations on specifications for this product. The above cure profiles are guideline recommendations. Cure conditions (time and temperature) may vary based on customers experience and their application requirements, asTDS BERGQUIST LIQUIBOND TLB SA1000, January -2019 be reliable. We cannot assume responsibility for the results obtained by others well as customer curing equipment, oven loading and actual over whose methods we have no control. It is the user s responsibility to oven temperatures. determine suitability for the user s purpose of any production methods mentioned herein and to adopt such precautions as may be advisable for the protection of CONFIGURATIONS AVAILABLE property and of persons against any hazards that may be involved inthe handling and use thereof. Inlight of the foregoing, Henkel Corporation specifically BERGQUIST LIQUIBOND TLB SA1000 is available with or disclaims all warranties expressed or implied, including warranties of without glass beads. merchantability or fitness for a particular purpose, arising from sale or use of Henkel Corporations products. Henkel Corporation specifically disclaims any liability for consequential or incidental damages of any kind, STORAGE including lost profits. The discussion herein of various processes or Store product in the unopened container in a dry location. compositions is not to be interpreted as representation that they are free from domination of patents owned by others or as a license under any Henkel Storage information may be indicated on the product container Corporation patents that may cover such processes or compositions. We labeling. recommend that each prospective user test his proposed application before repetitive use, using this data as a guide. This product may be covered by one or Optimal Storage: 10C for a 6 month shelf life.Material more United States or foreign patents or patent applications. removed from containers may be contaminated during use. Do Trademark usage: Except as otherwise noted Alltrademarks inthis document not return product to the original container. HenkelCorporation are trademarks and/or registered trademarks of Henkel and its affiliates in the U.S. and elsewhere. cannot assume responsibility for product which has been contaminated or stored under conditions other than those previously indicated. Ifadditional information is required, Reference 2 please contact your local Technical Service Center or Customer Service Representative. Conversions (C x 1.8)+ 32 =F kV/mm x 25.4 =V/mil mm /25.4 =inches N x 0.225=lb N/mm x 5.71=lb/in psi x 145 =N/mm MPa =N/mm Nm x 8.851 = lbin Nm x 0.738=lbft Nmm x 0.142 =ozin mPas =cP Disclaimer Note: The information provided in this Technical Data Sheet (TDS) including the recommendations for use and application of the product are based on our knowledge and experience of the product as at the date of this TDS. The product can have a variety of differentapplications as well as differingapplication and working conditions inyour environment that are beyond our control. Henkel is, therefore, not liable for the suitability of our product for the production processes and conditions in respect of which you use them, as well as the intended applications and results. We strongly recommend that you carry out your own prior trials to confirm such suitability of our product. Any liability inrespect of the information inthe Technical Data Sheet or any other written or oral recommendation(s) regarding the concerned product is excluded, except ifotherwise explicitly agreed and except inrelation to death or personal injury caused by our negligence and any liability under any applicable mandatory product liability law. In case products are delivered by Henkel Belgium NV, Henkel Electronic Materials NV, Henkel Nederland BV, Henkel Technologies France SAS and Henkel France SA please additionally note the following: Incase Henkel would be nevertheless held liable,on whatever legal ground, Henkels liability will inno event exceed the amount of the concerned delivery. In case products are delivered by Henkel Colombiana, S.A.S.the following disclaimer is applicable: The information provided in this Technical Data Sheet (TDS) including the recommendations for use and application of the product are based on our knowledge and experience of the product as at the date of this TDS. Henkel is, therefore, not liable for the suitability of our product for the production processes and conditions in respect of which you use them, as well as the intended applications and results. We strongly recommend that you carry out your own prior trials to confirm such suitability of our product. Any liability inrespect of the information inthe Technical Data Sheet or any other written or oral recommendation(s) regarding the concerned product is excluded, except ifotherwise explicitly agreed and except inrelation to death or personal injury caused by our negligence and any liability under any applicable mandatory product liability law. In case products are delivered by Henkel Corporation, Resin Technology Group, Inc., or Henkel Canada Corporation, the following disclaimer is applicable: The data contained herein are furnished for information only and are believed to Americas Europe Asia +1.888.943.6535 +32.1457.5611 +86.21.3898.4800 For the most direct access to local sales and technical support visit: www.henkel.com/electronics