TechnicalData Sheet BERGQUIST LIQUI FORM TLF3800LVO July -2019 PRODUCT DESCRIPTION TYPICAL PROPERTIES OF UNCURED MATERIAL Thermally Conductive, One-Part, Liquid Formable GelMaterial. Density ,ASTM D792,g/cc 3.1 ShelfLife 25C ,days 365 Technology Silicone Appearance Gray paste TYPICAL PROPERTIES OF CURED MATERIAL Cure Pre-cure gel Physical Properties Application Thermal management, (1) DispenseRate ,grams/minute 25 TIM(Thermal InterfaceMaterial) Siloxane Content, D 4 -D10 ,ASTM F2466,ppm <100 Operating Temperature -60 to 200C Heat Capacity ,ASTM D2169,J/g-C 0.74 Range Low Shear Viscosity ,ASTM D2196,Pas : UL Flammability Rating UL 94 V-0 -1 1.0s 1,200 High ShearViscosity ,ASTM D5099,Pas : FEATURES AND BENEFITS -1 100 s 300 Thermal Conductivity: 3.8W/m-K Dispensablepre-cured gel Electrical Properties Low volatility forsiliconesensitive applications Dielectric Strength,ASTM D149,V/mm 10,000 Stable viscosity in storage and in the application DielectricConstant ,ASTM D150 1,000Hz 8 Excellent chemicalstability and mechanical stability 10 Volume Resistivity ,ASTM D257,ohm-meter 110 Thermal Properties BERGQUIST LIQUI FORM TLF 3800LVO is a high conductivity gel thermal interface material designed for Thermal Conductivity ,ASTM D5470,W/(m-K) 3.8 demanding applicationsthat require a balance between dispensability and low component stress during assembly and (1) 30cc syringe, 90 psi(621 kPa), 0.100 orificeno attachment application. BERGQUIST LIQUIFORM TLF3800LVO isa one-part, highly GENERAL INFORMATION conformable gelwith thixotropic properties. The material is For safe handling information on this product, consult the Safety precured and requires no curing, mixing or refrigeration. Its Data Sheet, (SDS). unique formulation assures excellent thermal performance, low Not for product specifications appliedstress and reliablelong-term performance . The technicaldata contained herein are intended as reference only. Please contact your localquality department for BERGQUIST LIQUIFORM TLF 3800LVO isthixotropic and assistance and recommendations on specificationsfor this has a natural tack ensuring it forms around the component and product. stays in placein the application. CONFIGURATIONS AVAILABLE TYPICAL APPLICATIONS BERGQUIST LIQUIFORM TLF3800LVO is availablewith or without glassbeads. Glassbeads are availablein 7and Handheld devices 10 milconfigurations. Bare die to heat spreader lid Fillingvarious gapsbetween heat-generating devices to BERGQUIST LIQUIFORM TLF3800LVO issupplied in: heat sink and housing Devices requiring low assembly pressure Cartridges 30cc,150cc,300cc,600cc Highvalue assemblieswith rework Pail 1 gallon,4.3gallon BGA, PGA, PPGATDS BERGQUIST LIQUIFORM TLF3800LVO , July -2019 disclaims all warranties expressed or implied, including warranties of THAWING: merchantability or fitness for a particular purpose, arising from sale or use 1. Ifrefrigerated,allow container to reach room temperature of Henkel Corporations products. Henkel Corporation specifically before use . disclaims any liability for consequential or incidental damages of any kind, including lost profits. The discussion herein of various processes or 2. DO NOT open the container before contents reach 25C compositions isnot to be interpreted as representation that they are free from temperature. Any moisture that collectson the thawed domination of patents owned by others or as a licenseunder any Henkel container should be removed prior to opening the Corporation patents that may cover such processes or compositions. We recommend that each prospective user test his proposed applicationbefore container . repetitive use, using this data as a guide. Thisproduct may be covered by one or more United States or foreignpatents or patent applications. STORAGE Trademark usage: Except as otherwise noted Alltrademarks in this document Store product in the unopened container in a dry location. are trademarks and/or registered trademarks of Henkel and its affiliatesin the Storage information may be indicated on the product container U.S.and elsewhere. labeling. Reference 2 Optimal Storage: 25C for a 365 day shelflife,in sealed containers with moisture barrier packaging. Conversions (C x 1.8)+ 32 = F kV/mm x 25.4 = V/mil mm /25.4 = inches Nx 0.225= lb/F N/mm x 5.71= lb/in psi x 145 = N/mm MPa = N/mm Nm x 8.851 = lbin Nm x 0.738= lbft Nmm x 0.142 = ozin mPas = cP Disclaimer Note: The information provided in this Technical Data Sheet (TDS) including the recommendations for use and applicationof the product are based on our knowledge and experience ofthe product as at the date ofthis TDS.The product can have a variety of different applicationsas well as differingapplicationand working conditions in your environment that are beyond our control. Henkel is, therefore, not liableforthe suitability ofour product forthe production processes and conditions in respect of which you use them, as well as the intended applicationsand results. We strongly recommend that you carry out your own priortrialsto confirm such suitability ofour product. Any liabilityin respect ofthe information in the TechnicalData Sheet or any other written or oralrecommendation(s) regarding the concerned product isexcluded, except ifotherwise explicitly agreed and except in relation to death or personal injury caused by our negligenceand any liabilityunder any applicablemandatory product liabilitylaw. In case products are delivered by Henkel Belgium NV, Henkel Electronic Materials NV,Henkel Nederland BV,Henkel Technologies France SAS and Henkel France SA please additionally note the following: In case Henkel would be nevertheless held liable,on whatever legalground, Henkels liabilitywillin no event exceed the amount ofthe concerned delivery. In case products are delivered by Henkel Colombiana, S.A.S.the following disclaimer is applicable: The information provided in this Technical Data Sheet (TDS) including the recommendations for use and applicationof the product are based on our knowledge and experience ofthe product as at the date ofthis TDS. Henkel is, therefore, not liableforthe suitability ofour product forthe production processes and conditions in respect of which you use them, as well as the intended applicationsand results. We strongly recommend that you carry out your own priortrialsto confirm such suitability ofour product. Any liabilityin respect ofthe information in the TechnicalData Sheet or any other written or oralrecommendation(s) regarding the concerned product isexcluded, except ifotherwise explicitly agreed and except in relation to death or personal injury caused by our negligenceand any liabilityunder any applicablemandatory product liabilitylaw. In case products are delivered by Henkel Corporation, Resin Technology Group, Inc., or Henkel Canada Corporation, the following disclaimer is applicable: The data contained herein are furnished forinformation only and are believed to be reliable.We cannot assume responsibilityfor the results obtained by others over whose methods we have no control. It is the user s responsibility to determine suitability forthe user s purpose ofany production methods mentioned herein and to adopt such precautions as may be advisable for the protection of property and ofpersons against any hazards that may be involved in the handling and use thereof. In lightof the foregoing,Henkel Corporation specifically Americas Europe Asia +1.888.943.6535 +32.1457.5611 +86.21.2891.8000 For the most direct access to local sales and technical support visit: www.henkel.com/electronics