Technical Data Sheet BERGQUIST SIL PAD TSP PPK1300 Known as BERGQUIST POLY-PAD K-10 September -2019 PRODUCT DESCRIPTION Tensile Strength ,ASTM D412 Mpa 34 Polyester- Based, Thermally Conductive Insulation Material. (psi) ( 5,000) Technology Polyester- based Appearance Yellow Electrical Properties Reinforcement Carrier Polyimide DielectricBreakdown Voltage ,ASTM D149,VAC 6,000 12 Total Thickness 0.152 mm Volume Resistivity ,ASTM D257,ohm-meter 110 ,ASTM D374 DielectricConstant Application Thermal management, Thermal Properties Thermally conductive adhesive (1) Thermal Conductivity ,ASTM D5470,W/(m-K) 1.3 Maximum -20 to 150C Operating Temperature Thermal Performance vs. Pressure FEATURES AND BENEFITS TO-220 Thermal Performance ,C/W : Thermal impedance: 0.6C.in/W 50 psi 10 psi 3.76 Polyester based 25 psi 3.35 Forapplications requiring non-silicone conformal coatings 50 psi 2.75 Designed forsilicone-sensitive standard applications 100 psi 2.3 Excellent dielectricstrength and thermal performance 200 psi 2.03 TYPICAL APPLICATIONS 2 Thermal Impedance ,C-in /W: Power supplies 10 psi 1.04 Motor controls 25 psi 0.8 Power semiconductors 50 psi 0.6 100 psi 0.43 BERGQUIST SILPAD TSP PPK1300 is a composite offilm coated with a polyester resin . The material offerssuperior 200 psi 0.3 thermal performance foryour most criticalapplications with a thermal resistance of 0.2C-in2/W as well as excellent (1) The ASTM D5470 test fixture was used.The recordedvalue includes interfacial dielectric strength . Polyester- based, thermally conductive thermal resistance. These values are provided forreference only. Actual insulators from Bergquist provide a complete family of application performance is directly related to the surface roughness,flatness and materials for silicone-sensitive applications . Poly-Pads are pressure applied. ideallysuited for applications requiring conformal coatings or applications where silicone contamination is a concern GENERAL INFORMATION (telecomm and certain aerospace applications) .Poly-Pads are For safe handling information on this product, consult the Safety constructed with ceramic- filledpolyester resins coating either Data Sheet, (SDS). side ofa fiberglass carrieror a filmcarrier. The Poly-Pad family offers a complete range ofperformance characteristics CONFIGURATIONS AVAILABLE to match individual applications . Sheet form,die-cut parts and rollform With orwithout pressure- sensitive adhesive TYPICAL PROPERTIES Physical Properties Not for product specifications Hardness, Shore A 90 The technical data contained herein are intended as reference Breaking Strength ,ASTM D1458,KN/m 5 only. Please contact your local quality department for Elongation ,ASTM D412 ,% 40 assistance and recommendations on specifications forthis Flammability, UL 94 V-0 product.TDS BERGQUIST SILPAD TSP PPK1300 , September -2019 Conversions (C x 1.8)+ 32 =F kV/mm x 25.4 =V/mil mm /25.4 =inches N x 0.225=lb/F N/mm x 5.71=lb/in psi x 145 =N/mm MPa =N/mm Nm x 8.851 = lbin Nm x 0.738=lbft Nmm x 0.142 =ozin mPas =cP Disclaimer Note: The information provided in this Technical Data Sheet (TDS) including the recommendations foruse and application ofthe product are based on our knowledge and experience ofthe product as at the date ofthis TDS.The product can have a variety ofdifferentapplications as well as differingapplication and working conditions in your environment that are beyond our control.Henkel is, therefore,not liableforthe suitability ofour product forthe production processes and conditions in respect ofwhich you use them, as well as the intended applications and results. We strongly recommend that you carry out your own priortrials to confirm such suitability ofour product. Any liabilityin respect ofthe information in the Technical Data Sheet orany other written ororalrecommendation(s) regardingthe concerned product is excluded, except ifotherwise explicitly agreed and except in relationto death orpersonal injury caused by our negligence and any liabilityunder any applicable mandatory product liabilitylaw. In case products are delivered by Henkel Belgium NV, Henkel Electronic Materials NV,Henkel Nederland BV,Henkel Technologies France SAS and Henkel France SA please additionally note the following: In case Henkel would be nevertheless held liable,on whatever legalground, Henkels liabilitywillin no event exceed the amount ofthe concerned delivery. In case products are delivered by Henkel Colombiana, S.A.S.the following disclaimer is applicable: The information provided in this Technical Data Sheet (TDS) including the recommendations foruse and application ofthe product are based on our knowledge and experience ofthe product as at the date ofthis TDS. Henkel is, therefore,not liableforthe suitability ofour product forthe production processes and conditions in respect ofwhich you use them, as well as the intended applications and results. We strongly recommend that you carry out your own priortrials to confirm such suitability ofour product. Any liabilityin respect ofthe information in the Technical Data Sheet orany other written ororalrecommendation(s) regardingthe concerned product is excluded, except ifotherwise explicitly agreed and except in relationto death orpersonal injury caused by our negligence and any liabilityunder any applicable mandatory product liabilitylaw. In case products are delivered by Henkel Corporation, Resin Technology Group, Inc., or Henkel Canada Corporation, the following disclaimer is applicable: The data contained hereinare furnished forinformation only and are believed to be reliable.We cannot assume responsibility forthe results obtained by others over whose methods we have no control. It is the user s responsibility to determine suitability forthe user s purpose ofany production methods mentioned herein and to adopt such precautions as may be advisable forthe protection of property and ofpersons against any hazards that may be involved in the handling and use thereof.In light ofthe foregoing,Henkel Corporation specifically disclaims all warranties expressed or implied, including warranties of merchantability or fitness for a particular purpose, arising from sale or use of Henkel Corporations products. Henkel Corporation specifically disclaims any liability for consequential or incidental damages of any kind, including lost profits. The discussion herein of various processes or compositions is not to be interpreted as representation that they are freefrom domination ofpatents owned by others or as a license under any Henkel Corporation patents that may cover such processes or compositions. We recommend that each prospective user test his proposed application before repetitive use, using this data as a guide. This product may be covered by one or more United States orforeignpatents orpatent applications. Trademark usage: Except as otherwise noted Alltrademarks in this document are trademarks and/or registered trademarks of Henkel and its affiliatesin the U.S. and elsewhere. Reference 3 Americas Europe Asia +1.888.943.6535 +32.1457.5611 +86.21.2891.8000 For the most direct access to local sales and technical support visit: www.henkel.com/electronics