TechnicalData Sheet BERGQUIST SILPAD TSP PPK900 Known as BERGQUIST POLY-PAD K-4 May -2019 PRODUCT DESCRIPTION Conversions Polyester- Based, Thermally Conductive Insulation Material. (C x 1.8)+ 32 = F kV/mm x 25.4= V/mil Technology Polyester- based mm /25.4= inches Appearance Mauve N x 0.225= lb/F Reinforcement Carrier Kapton N/mm x 5.71= lb/in psi x 145= N/mm Total Thickness 0.152 0.25 mm MPa = N/mm ,ASTM D374 Nm x 8.851 = lbin Application Thermal management, Nm x 0.738= lbft Thermally conductive adhesive Nmm x 0.142= ozin Maximum 150C mPas = cP Operating Temperature Disclaimer TYPICAL APPLICATIONS Note: Applications requiring conformal coatings The information provided inthis TechnicalData Sheet (TDS) includingthe recommendations for use and application of the product are based on our Telecommunications knowledge and experience of the product as at the date of this TDS. The product Aerospace can have a variety of different applications as well as differingapplication and working conditions inyour environment that are beyond our control. Henkel is, BERGQUIST SILPAD TSP PPK900 is a composite of DuPont therefore, not liablefor the suitability of our product for the production processes and conditions inrespect of which you use them, as well as the intended Kapton film coated with an alumina-filledpolyester resin . applications and results. We strongly recommend that you carry out your own BERGQUIST SILPAD TSP PPK900 is an economical insulator prior trials to confirm such suitability of our product. and the Kapton carrier provides excellent dielectricand Any liabilityinrespect of the information inthe TechnicalData Sheet or any other written or oral recommendation(s) regarding the concerned product is excluded, physical strength . except ifotherwise explicitly agreed and except inrelation to death or personal injury caused by our negligenceand any liabilityunder any applicable mandatory product liabilitylaw. TYPICAL PROPERTIES In case products are delivered by Henkel Belgium NV, Henkel Electronic Electrical Properties Materials NV, Henkel Nederland BV, Henkel Technologies France SAS and DielectricBreakdown Voltage ,ASTM D149,VAC 6,000 Henkel France SA please additionally note the following: 12 Incase Henkel would be nevertheless held liable,on whatever legalground, Volume Resistivity ,ASTM D257,ohm-meter 110 Henkels liabilitywillinno event exceed the amount of the concerned delivery. In case products are delivered by Henkel Colombiana, S.A.S.the following Thermal Properties disclaimer is applicable: Thermal Conductivity ,ASTM D5470,W/(m-K) 0.9 The information provided inthis TechnicalData Sheet (TDS) includingthe recommendations for use and application of the product are based on our Thermal Resistance , Bergquist Flat Plate Test 0.3 knowledge and experience of the product as at the date of this TDS. Henkel is, 2 Method ,C-in/W therefore, not liablefor the suitability of our product for the production processes and conditions inrespect of which you use them, as well as the intended applications and results. We strongly recommend that you carry out your own prior trials to confirm such suitability of our product. Any liabilityinrespect of the information inthe TechnicalData Sheet or any other GENERAL INFORMATION written or oral recommendation(s) regarding the concerned product is excluded, For safe handling information on this product, consult the Safety except ifotherwise explicitly agreed and except inrelation to death or personal Data Sheet, (SDS). injury caused by our negligenceand any liabilityunder any applicable mandatory product liabilitylaw. Not for product specifications In case products are delivered by Henkel Corporation, Resin Technology The technicaldata contained herein are intended as reference Group, Inc., or Henkel Canada Corporation, the following disclaimer is applicable: only. Please contact your local quality department for The data contained herein are furnished for information only and are believed to assistance and recommendations on specifications for this be reliable.We cannot assume responsibility for the results obtained by others product. over whose methods we have no control. It is the user s responsibility to determine suitability for the user s purpose of any production methods mentioned herein and to adopt such precautions as may be advisable for the protection of property and of persons against any hazards that may be involved inthe handling and use thereof. Inlight of the foregoing, Henkel Corporation specifically disclaims all warranties expressed or implied, including warranties of merchantability or fitness for a particular purpose, arising from sale or use of Henkel Corporations products. Henkel Corporation specifically disclaims any liability for consequential or incidental damages of any kind,TDS BERGQUIST SILPAD TSP PPK900 , May -2019 including lost profits. The discussion herein of various processes or compositions is not to be interpreted as representation that they are free from domination of patents owned by others or as a license under any Henkel Corporation patents that may cover such processes or compositions. We recommend that each prospective user test his proposed application before repetitive use, using this data as a guide. This product may be covered by one or more United States or foreign patents or patent applications. Trademark usage: Except as otherwise noted Alltrademarks inthis document are trademarks and/or registered trademarks of Henkel and its affiliatesinthe U.S. and elsewhere. Reference 2 Americas Europe Asia +1.888.943.6535 +32.1457.5611 +86.21.3898.4800 For the most direct access to local sales and technical support visit: www.henkel.com/electronics