Technical Data Sheet BERGQUIST SILPAD TSP 900 Known as BERGQUIST SIL-PAD 400 October -2018 PRODUCT DESCRIPTION Electrical Properties The OriginalSil-Pad Material. DielectricBreakdown Voltage ,ASTM D149,Vac 3,500 to 4,500 Technology Silicone DielectricConstant ,ASTM D150 1,000 Hz 5.5 Appearance Gray 11 Volume Resistivity ,ASTM D257 ,ohm-meter 110 Reinforcement Carrier Fiberglass Total Thickness 0.178,0.229mm Thermal Properties Application Thermalmanagement, ThermalConductivity ,ASTM D5470 ,W/(m-K) 0.9 Thermally conductive adhesive Thermal Performance vs. Pressure Operating Temperature -60 to 180C TO-220 ThermalPerformance ,C/W Range 0.007 : FEATURES AND BENEFITS 10 psi 6.62 2 Thermalimpedance: 1.13C-in /W 50 psi 25 psi 5.93 OriginalSil-Pad material 50 psi 5.14 Excellent mechanical and physical characteristics 100 psi 4.38 Flameretardant 200 psi 3.61 0.009 : TYPICAL APPLICATIONS 10 psi 8.51 Power supplies 25 psi 7.62 Automotive electronics 50 psi 6.61 Power semiconductors 100 psi 5.63 Motor controls 200 psi 4.64 BERGQUIST SILPAD TSP 900 is a composite of silicone rubber and fiberglass. The material is flame retardant and is 2 (1) ThermalImpedance ,ASTM D5470 ,C-in /W specially formulated foruse as a thermally conductive insulator 0.007 : . The primary use for BERGQUIST SILPAD TSP 900 is to 10 psi 1.82 electricallyisolate power sources fromheat sinks . 25 psi 1.42 BERGQUIST SILPAD TSP 900 has excellent mechanical and 50 psi 1.13 physical characteristics . Surfaces are pliable and allow 100 psi 0.82 complete surface contact with excellent heat dissipation . 200 psi 0.54 0.009 : BERGQUIST SILPAD TSP 900 actually improves its thermal resistance with age. The reinforcingfiberglass provides 10 psi 2.34 excellent cut-through resistance .Inaddition, BERGQUIST SIL 25 psi 1.83 PAD TSP 900 is non-toxic and resists damage from cleaning 50 psi 1.45 agents . 100 psi 1.05 200 psi 0.69 TYPICAL PROPERTIES Physical Properties Hardness, Shore A ,ASTM D2240 85 I)The ASTM D5470 test fixture was used. The recorded value includes interfacialthermal resistance. These values areprovided forreferenceonly. Actual application performance is BreakingStrength ,ASTM D1458,KN/m 5 directly related to the surface roughness, flatness and pressure applied. Elongation ,45 to warp and fill,ASTM D412,% 54 Tensile Strength ,ASTM D412,MPa 20 GENERAL INFORMATION Flammability Rating, UL 94 V-0 For safe handling information on this product, consult the Safety Data Sheet, (SDS).TDS BERGQUIST SILPAD TSP 900, October -2018 Corporation patents that may cover such processes or compositions. We Not for product specifications recommend that each prospective user test his proposed application before The technical data contained hereinareintended as reference repetitive use, using this data as a guide. This product may be covered by one or only. Please contact your local quality department for more United States or foreignpatents or patent applications. assistance and recommendations on specifications for this Trademark usage: Except as otherwise noted All trademarks in this document are trademarks and/or registered trademarks of Henkel and its affiliatesin the product. U.S.and elsewhere. CONFIGURATIONS AVAILABLE BERGQUIST SILPAD TSP 900 aresupplied in: Reference 1 Sheet form,die-cut parts and rollform with or without pressure sensitive adhesive Conversions (C x 1.8)+ 32 = F kV/mm x 25.4 = V/mil mm /25.4 = inches Nx 0.225 = lb N/mmx 5.71 = lb/in psi x 145 = N/mm MPa = N/mm Nm x 8.851= lbin Nm x 0.738= lbft Nmm x 0.142= ozin mPas = cP Disclaimer Note: The information provided in this Technical Data Sheet (TDS) including the recommendations for use and application of the product are based on our knowledge and experience of the product as at the date of this TDS.The product can have a variety of different applications as well as differingapplication and working conditions in your environment that are beyond our control. Henkel is, therefore,not liableforthe suitability of our product forthe production processes and conditions in respect of which you use them, as well as the intended applications and results. We strongly recommend that you carry out your own priortrials to confirmsuch suitability of our product. Any liabilityin respect of the information in the Technical Data Sheet or any other written or oralrecommendation(s) regardingthe concerned product is excluded, except ifotherwise explicitly agreed and except in relation to death or personal injury caused by our negligenceand any liabilityunder any applicablemandatory product liabilitylaw. In case products are delivered by Henkel Belgium NV, Henkel Electronic Materials NV, Henkel Nederland BV, Henkel Technologies France SAS and Henkel France SA please additionally note the following: In case Henkel would be nevertheless held liable,on whatever legalground, Henkels liabilitywill in no event exceed the amount of the concerned delivery. In case products are delivered by Henkel Colombiana, S.A.S.the following disclaimer is applicable: The information provided in this Technical Data Sheet (TDS) including the recommendations for use and application of the product are based on our knowledge and experience of the product as at the date of this TDS. Henkelis, therefore,not liableforthe suitability of our product forthe production processes and conditions in respect of which you use them, as well as the intended applications and results. We strongly recommend that you carry out your own priortrials to confirmsuch suitability of our product. Any liabilityin respect of the information in the Technical Data Sheet or any other written or oralrecommendation(s) regardingthe concerned product is excluded, except ifotherwise explicitly agreed and except in relation to death or personal injury caused by our negligenceand any liabilityunder any applicablemandatory product liabilitylaw. In case products are delivered by Henkel Corporation, Resin Technology Group, Inc., or Henkel Canada Corporation, the following disclaimer is applicable: The data contained hereinarefurnished forinformation only and arebelieved to be reliable.We cannot assume responsibility forthe results obtained by others over whose methods we have no control. It is the user s responsibility to determine suitability forthe user s purpose of any production methods mentioned hereinand to adopt such precautions as may be advisable forthe protection of property and of persons against any hazards that may be involved in the handling and use thereof. In light of the foregoing,Henkel Corporation specifically disclaims all warranties expressed or implied, including warranties of merchantability or fitness for a particular purpose, arising from sale or use of Henkel Corporations products. Henkel Corporation specifically disclaims any liability for consequential or incidental damages of any kind, including lost profits. The discussion herein of various processes or compositions is not to be interpreted as representation that they are freefrom domination of patents owned by others or as a license under any Henkel Americas Europe Asia +1.888.943.6535 +32.1457.5611 +86.21.3898.4800 For the most direct access to local sales and technical support visit: www.henkel.com/electronics