Technical Data Sheet BERGQUIST SIL PAD TSP 1680 Known as BERGQUIST SIL-PAD980 November -2018 PRODUCT DESCRIPTION Electrical Properties High Cut-Through Resistant, Electrically Insulating, Thermally DielectricBreakdown Voltage ,ASTM D149,Vac 4,000 Conductive Material . DielectricConstant ,ASTM D150 1,000 Hz 6.0 10 Volume Resistivity ,ASTM D257,ohm-meter 110 Technology Silicone Appearance Mauve Thermal Properties Reinforcement Carrier Fiberglass Thermal Conductivity ,ASTM D5470,W/(m-K) 1.2 Total Thickness 0.229mm Thermal Performance vs. Pressure Application Thermal management, TO-220 Thermal Performance ,C/W Thermally conductive adhesive 10 psi 5.48 Operating Temperature -40 to 150C Range 25 psi 5.07 50 psi 4.52 FEATURES AND BENEFITS 100 psi 4.04 2 Thermal impedance: 1.07C-in /W 50 psi 200 psi 3.56 Excellent cut-through resistance 2 (1) Use in screw- mounted applications with cut-through Thermal Impedance ,ASTM D5470,C-in /W problems 10 psi 1.51 25 psi 1.22 TYPICAL APPLICATIONS 50 psi 1.07 Silicone-sensitive assemblies 100 psi 0.89 Telecommunications 200 psi 0.53 Automotive electronics In addition to excellent heat transfer and dielectricproperties, I)The ASTM D5470 test fixture was used. The recorded value includes interfacial thermal BERGQUIST SILPAD TSP 1680is specially formulated for resistance. These values are provided for reference only. Actual application performance is directly related to the surface roughness, flatness and pressure applied. high resistance to crushing and cut-through typically found in high-pressure applications where surface imperfections such as burrs and dents are inherently common (e.g.heavily- GENERAL INFORMATION machined metal surfaces manufactured from extrusions or For safe handling information on this product, consult the Safety castings) . Data Sheet, (SDS). With a field-proven history ofreliability, BERGQUIST SILPAD Not for product specifications TSP 1680 is Bergquists best material for cut-through The technical data contained herein are intended as reference resistance in screw- mounted and other applications with only. Please contact your local quality department for cut-through problems . assistance and recommendations on specifications for this product. TYPICAL PROPERTIES Physical Properties CONFIGURATIONS AVAILABLE Shore Hardness, ASTM D2240 ,Shore A 95 BERGQUIST SILPAD TSP 1680 are supplied in: Sheet form, roll form and die-cut parts Hardness, Shore A,ASTM D2240 95 With or without pressure- sensitive adhesive Breaking Strength ,ASTM D1458,KN/m 26 Elongation ,45 to warp and fill,ASTM D412 ,% 10 Cut-Through Resistance ,ASTM D412 ,Kg 340 Flammability Rating, UL 94 V-0TDS BERGQUIST SILPAD TSP 1680, November -2018 Conversions (C x 1.8)+ 32 =F kV/mm x 25.4 =V/mil mm /25.4 =inches N x 0.225=lb N/mm x 5.71=lb/in psi x 145 =N/mm MPa =N/mm Nm x 8.851 = lbin Nm x 0.738=lbft Nmm x 0.142 =ozin mPas =cP Disclaimer Note: The information provided in this Technical Data Sheet (TDS) including the recommendations for use and application of the product are based on our knowledge and experience ofthe product as at the date ofthis TDS. The product can have a variety of different applications as well as differing application and working conditions in your environment that are beyond our control. Henkel is, therefore, not liablefor the suitability ofour product for the production processes and conditions in respect of which you use them, as well as the intended applications and results. We strongly recommend that you carry out your own prior trials to confirm such suitability ofour product. Any liability in respect ofthe information in the Technical Data Sheet or any other written or oral recommendation(s) regarding the concerned product is excluded, except ifotherwise explicitly agreed and except in relation to death or personal injury caused by our negligence and any liability under any applicable mandatory product liability law. In case products are delivered by Henkel Belgium NV, Henkel Electronic Materials NV,Henkel Nederland BV,Henkel Technologies France SAS and Henkel France SA please additionally note the following: In case Henkel would be nevertheless held liable,on whatever legal ground, Henkels liability will in no event exceed the amount ofthe concerned delivery. In case products are delivered by Henkel Colombiana, S.A.S.the following disclaimer is applicable: The information provided in this Technical Data Sheet (TDS) including the recommendations for use and application of the product are based on our knowledge and experience ofthe product as at the date ofthis TDS. Henkel is, therefore, not liablefor the suitability ofour product for the production processes and conditions in respect of which you use them, as well as the intended applications and results. We strongly recommend that you carry out your own prior trials to confirm such suitability ofour product. Any liability in respect ofthe information in the Technical Data Sheet or any other written or oral recommendation(s) regarding the concerned product is excluded, except ifotherwise explicitly agreed and except in relation to death or personal injury caused by our negligence and any liability under any applicable mandatory product liability law. In case products are delivered by Henkel Corporation, Resin Technology Group, Inc., or Henkel Canada Corporation, the following disclaimer is applicable: The data contained herein are furnished for information only and are believed to be reliable.We cannot assume responsibility for the results obtained by others over whose methods we have no control. It is the user s responsibility to determine suitability for the user s purpose ofany production methods mentioned herein and to adopt such precautions as may be advisable for the protection of property and ofpersons against any hazards that may be involved in the handling and use thereof. In light of the foregoing, Henkel Corporation specifically disclaims all warranties expressed or implied, including warranties of merchantability or fitness for a particular purpose, arising from sale or use of Henkel Corporations products. Henkel Corporation specifically disclaims any liability for consequential or incidental damages of any kind, including lost profits. The discussion herein of various processes or compositions is not to be interpreted as representation that they are free from domination of patents owned by others or as a license under any Henkel Corporation patents that may cover such processes or compositions. We recommend that each prospective user test his proposed application before repetitive use, using this data as a guide. This product may be covered by one or more United States or foreign patents or patent applications. Trademark usage: Except as otherwise noted Alltrademarks in this document are trademarks and/or registered trademarks of Henkel and its affiliates in the U.S.and elsewhere. Reference 1 Americas Europe Asia +1.888.943.6535 +32.1457.5611 +86.21.3898.4800 For the most direct access to local sales and technical support visit: www.henkel.com/electronics