TechnicalData Sheet BERGQUIST GAP PAD TGP 10000ULM February -2020 PRODUCT DESCRIPTION Electrical Properties 11 A 10.0W/m-K, extremely soft Gap Pad with exceptional Volume Resistivity ,ASTM D257 ,ohm-meter 2.510 thermal performance at low pressures. DielectricConstant ,ASTM D150 ,1,000Hz 9.1 DielectricBreakdown Voltage : Technology Silicone 40 milsample ,VAC 3,200 Appearance Gray Thermal Properties Application Thermal management, Thermal Conductivity ,ASTM D5470 ,W/(m-K) 10 TIM(Thermal InterfaceMaterial) Operating Temperature -60 to 200C Range GENERAL INFORMATION UL Flammability Rating UL 94V-0 For safe handling information on this product, consult the Safety Data Sheet, (SDS). FEATURES AND BENEFITS Not for product specifications Thermal Conductivity: 10 W/m-K The technicaldata contained hereinare intendedas reference High-compliance,low compression stress only. Please contact your local quality department for Ultra low modulus assistance and recommendations on specifications for this product. BERGQUIST GAP PAD TGP 10000ULM is an extremely soft gap fillingmaterial rated at a thermal conductivity of 10.0 W/m-K . It is specially formulated for high performance CONFIGURATIONS AVAILABLE applications requiring low assembly stress .The material offers BERGQUIST GAP PAD TGP 10000ULM is available inthe exceptional thermal performance at low pressures due to the following configurations: unique fillerpackageand ultra low modulus resin formulation . Sheet size 8 x 8 BERGQUIST GAP PAD TGP 10000ULM is highly conformal to Standard 0.040,0.060,0.080,0.100,0.125 inch rough or irregular surfaces, allowing excellent wet-out at the Thicknesses (1.0,1.5, 2.0, 2.5, 3.18mm) interface.Protective liners are supplied on both sides allowing for ease of use . STORAGE TYPICAL APPLICATIONS Store product inthe unopened container ina dry location. Storage information may be indicatedon the product container Telecommunications (routers, switches, base stations) labeling. Opticaltransceivers ASICs and DSPs Optimal Storage: 5 to 28C, 10 to 50 % RH for 180 days shelf life.Material removed from containers may be contaminated TYPICAL PROPERTIES OF CURED MATERIAL during use. Do not return product to the original container. HenkelCorporation cannot assume responsibility for product Physical Properties which has been contaminated or stored under conditions other Hardness, Shore 000,ASTM D2240 75 than those previously indicated.Ifadditional information is Inherent Surface Tack 2 required, please contact your local TechnicalService Center or Density ,ASTM D792,g/cc 3 Customer Service Representative. Heat Capacity ,ASTM E1269,J/g-K 0.8 Shelflife,days 180 Young s Modulus kPa 173 (psi) (25 )TDS BERGQUIST GAP PAD TGP 10000ULM, February -2020 Conversions (C x 1.8)+ 32 =F kV/mm x 25.4 =V/mil mm /25.4 =inches N x 0.225 =lb/F N/mm x 5.71 =lb/in psi x 145 =N/mm MPa =N/mm Nm x 8.851 = lbin Nm x 0.738=lbft Nmm x 0.142=ozin mPas =cP Disclaimer Note: The information provided inthis TechnicalData Sheet (TDS) includingthe recommendations for use and applicationof the product are based on our knowledge and experienceof the product as at the date of this TDS. The product can have a variety of differentapplications as well as differingapplicationand working conditions inyour environment that are beyond our control. Henkelis, therefore, not liablefor the suitability of our product for the production processes and conditions inrespect of which you use them, as well as the intended applications and results. We strongly recommend that you carry out your own prior trials to confirm such suitability of our product. Any liabilityinrespect of the information in the Technical Data Sheet or any other written or oral recommendation(s) regarding the concerned product is excluded, except if otherwise explicitly agreed and except inrelation to death or personal injury caused by our negligenceand any liabilityunder any applicablemandatory product liabilitylaw. In case products are delivered by Henkel Belgium NV, Henkel Electronic Materials NV, Henkel Nederland BV, Henkel Technologies France SAS and Henkel France SA please additionally note the following: Incase Henkelwould be nevertheless held liable,on whatever legal ground, Henkels liabilitywill inno event exceed the amount of the concerned delivery. In case products are delivered by Henkel Colombiana, S.A.S.the following disclaimer is applicable: The information provided inthis TechnicalData Sheet (TDS) includingthe recommendations for use and applicationof the product are based on our knowledge and experienceof the product as at the date of this TDS. Henkelis, therefore, not liablefor the suitability of our product for the production processes and conditions inrespect of which you use them, as well as the intended applications and results. We strongly recommend that you carry out your own prior trials to confirm such suitability of our product. Any liabilityinrespect of the information inthe TechnicalData Sheet or any other written or oral recommendation(s) regarding the concerned product is excluded, except ifotherwise explicitlyagreed and except inrelation to death or personal injury caused by our negligenceand any liabilityunder any applicablemandatory product liabilitylaw. In case products are delivered by Henkel Corporation, Resin Technology Group, Inc., or Henkel Canada Corporation, the following disclaimer is applicable: The data contained hereinare furnished for information only and are believedto be reliable.We cannot assume responsibility for the results obtained by others over whose methods we have no control. It is the user s responsibility to determine suitability for the user s purpose of any production methods mentioned hereinand to adopt such precautions as may be advisable for the protection of property and of persons against any hazards that may be involved inthe handling and use thereof. Inlight of the foregoing, Henkel Corporation specifically disclaims all warranties expressed or implied, including warranties of merchantability or fitness for a particular purpose, arising from sale or use of Henkel Corporations products. Henkel Corporation specifically disclaims any liability for consequential or incidental damages of any kind, including lost profits. The discussion herein of various processes or compositions is not to be interpreted as representation that they are free from domination of patents owned by others or as a licenseunder any Henkel Corporation patents that may cover such processes or compositions. We recommend that each prospective user test his proposed applicationbefore repetitiveuse, using this data as a guide.This product may be covered by one or more UnitedStates or foreignpatents or patent applications. Trademark usage Except as otherwise noted, all trademarks inthis document are trademarks of HenkelCorporation inthe U.S.and elsewhere. denotes a trademark registered inthe U.S.Patent and Trademark Office. Reference2 Americas Europe Asia +1.888.943.6535 +32.1457.5611 +86.21.2891.8000 For the most direct access to local sales and technical support visit: www.henkel.com/electronics