TechnicalData Sheet BERGQUIST GAP PAD TGP 12000ULM May -2020 PRODUCT DESCRIPTION Electrical Properties 12 A 12 W/m-K, extremely soft Gap Pad with exceptional thermal Volume Resistivity ,ASTM D257 ,ohm-meter 1.510 performance at low pressures. DielectricConstant ,ASTM D150 ,1,000Hz 8.4 DielectricBreakdown Voltage : Technology Silicone 0.04 inchsample ,VAC 6,200 Appearance Gray Thermal Properties Application Thermal management, Thermal Conductivity ,ASTM D5470 ,W/(m-K) 12 TIM(Thermal InterfaceMaterial) Operating Temperature -60 to 200C Range ,Continuous or GENERAL INFORMATION others For safe handling information on this product, consult the Safety UL Flammability Rating UL 94V-0 Data Sheet, (SDS). FEATURES AND BENEFITS Not for product specifications Thermal Conductivity: 12 W/m-K The technicaldata contained hereinare intended as reference High-compliance,low compression stress only. Please contact your localquality department for Ultra low modulus assistance and recommendations on specifications for this product. BERGQUIST GAP PAD TGP 12000ULM is an extremely soft gap fillingmaterial rated at a thermal conductivity of 12.0 W/m-K . It is specially formulated for high performance CONFIGURATIONS AVAILABLE applications requiring low assembly stress .The material offers BERGQUIST GAP PAD TGP 12000ULM is availablein the exceptional thermal performance at low pressures due to the followingconfigurations: unique fillerpackage and ultra low modulus resin formulation . Sheet size 8 x 8 BERGQUIST GAP PAD TGP 12000ULM is highlyconformal to Standard 0.040,0.060,0.080,0.100,0.125 inch rough or irregular surfaces, allowingexcellentwet-out at the Thicknesses (1.0,1.5,2.0,2.5,3.18mm) interface.Protective liners are supplied on both sides allowing for ease ofuse . STORAGE Store product in the unopened container in a dry location. TYPICAL APPLICATIONS Storage information may be indicatedon the product container Telecommunications (routers, switches, base stations) labeling. Opticaltransceivers ASICs and DSPs Optimal Storage: 25 C (3), 50 % RH (10) for a 180 days shelf life.Materialremoved from containers may be contaminated during use. Do not return product to the originalcontainer. TYPICAL PROPERTIES OF CURED MATERIAL HenkelCorporation cannot assume responsibility for product Physical Properties which has been contaminated or stored under conditions other Hardness, Shore 000,ASTM D2240 68 than those previously indicated.Ifadditionalinformation is Inherent Surface Tack 2 required, please contact your localTechnicalService Center or Density ,ASTM D792,g/cc 3.1 Customer Service Representative. Heat Capacity ,ASTM E1269,J/g-K 0.7 Shelflife,days 180 Young s Modulus kPa 103 (psi) ( 15 )TDS BERGQUIST GAP PAD TGP 12000ULM, May -2020 Conversions (C x 1.8)+ 32 =F kV/mm x 25.4 =V/mil mm /25.4 =inches N x 0.225 =lb/F N/mm x 5.71 =lb/in psi x 145 =N/mm MPa =N/mm Nm x 8.851 = lbin Nm x 0.738=lbft Nmm x 0.142=ozin mPas =cP Disclaimer Note: The information provided in this TechnicalData Sheet (TDS) includingthe recommendations for use and application of the product are based on our knowledge and experience ofthe product as at the date ofthis TDS. The product can have a variety of differentapplications as wellas differingapplicationand working conditions inyour environment that are beyond our control. Henkelis, therefore, not liablefor the suitability ofour product for the production processes and conditions in respect of which you use them, as well as the intended applications and results. We strongly recommend that you carry out your own prior trials to confirm such suitability ofour product. Any liabilityinrespect ofthe information in the Technical Data Sheet or any other written or oral recommendation(s) regarding the concerned product is excluded, except if otherwise explicitlyagreed and except in relation to death or personal injury caused by our negligenceand any liabilityunder any applicablemandatory product liabilitylaw. In case products are delivered by Henkel Belgium NV, Henkel Electronic Materials NV, Henkel Nederland BV, Henkel Technologies France SAS and Henkel France SA please additionally note the following: In case Henkelwould be nevertheless heldliable,on whatever legalground, Henkels liabilitywillinno event exceed the amount ofthe concerned delivery. In case products are delivered by Henkel Colombiana, S.A.S.the following disclaimer is applicable: The information provided in this TechnicalData Sheet (TDS) includingthe recommendations for use and application of the product are based on our knowledge and experience ofthe product as at the date ofthis TDS. Henkelis, therefore, not liablefor the suitability ofour product for the production processes and conditions in respect of which you use them, as well as the intended applications and results. We strongly recommend that you carry out your own prior trials to confirm such suitability ofour product. Any liabilityinrespect ofthe information inthe TechnicalData Sheet or any other written or oral recommendation(s) regarding the concerned product is excluded, except ifotherwise explicitlyagreed and except inrelationto death or personal injury caused by our negligenceand any liabilityunder any applicablemandatory product liabilitylaw. In case products are delivered by Henkel Corporation, Resin Technology Group, Inc., or Henkel Canada Corporation, the following disclaimer is applicable: The data contained hereinare furnished for information only and are believedto be reliable.We cannot assume responsibility for the results obtained by others over whose methods we have no control. It is the user s responsibility to determine suitability for the user s purpose ofany production methods mentioned hereinand to adopt such precautions as may be advisable for the protection of property and ofpersons against any hazards that may be involved inthe handling and use thereof. In lightof the foregoing,Henkel Corporation specifically disclaims all warranties expressed or implied, including warranties of merchantability or fitness for a particular purpose, arising from sale or use of Henkel Corporations products. Henkel Corporation specifically disclaims any liability for consequential or incidental damages of any kind, including lost profits. The discussion herein of various processes or compositions is not to be interpreted as representation that they are free from domination of patents owned by others or as a licenseunder any Henkel Corporation patents that may cover such processes or compositions. We recommend that each prospective user test his proposed application before repetitive use, using this data as a guide.This product may be covered by one or more United States or foreignpatents or patent applications. Trademark usage Except as otherwise noted, alltrademarks inthis document are trademarks of HenkelCorporation inthe U.S.and elsewhere. denotes a trademark registered inthe U.S.Patent and Trademark Office. Reference1 Americas Europe Asia +1.888.943.6535 +32.1457.5611 +86.21.2891.8000 For the most direct access to local sales and technical support visit: www.henkel.com/electronics