Technical Data Sheet BERGQUIST GAP PAD TGP 7000ULM May -2019 PRODUCT DESCRIPTION Electrical Properties A 7 W/m-K, extremely soft Gap Pad with exceptional thermal Dielectric Constant ,ASTM D150 ,1,000Hz 8.7 performance at low pressures. Dielectric Breakdown Voltage : 40 milsample ,VAC >5,000 11 Technology Silicone Volume Resistivity ,ASTM D257 ,ohm-meter 1.210 Appearance Gray Thermal Properties Interface Tack 2 sides Thermal Conductivity ,ASTM D5470 ,W/(m-K) 7.0 Thickness 0.5 to 3.18mm Application Thermal management, TIM(Thermal Interface Material) GENERAL INFORMATION Operating Temperature -60 to 200C For safe handling information on this product, consult the Safety Range Data Sheet, (SDS). UL Flammability Rating UL 94 V-0 Not for product specifications The technical data contained herein are intended as reference FEATURES AND BENEFITS only. Please contact your local quality department for Thermal Conductivity: 7 W/m-K assistance and recommendations on specifications for this High-compliance,low compression stress product. Ultra low modulus BERGQUIST GAP PAD TGP 7000ULM isan extremely soft CONFIGURATIONS AVAILABLE gap fillingmaterial rated at a thermal conductivity of 7.0W/m-K . BERGQUIST GAP PAD TGP 7000ULM is available in the It is specially formulated for highperformance applications following configurations: requiring low assembly stress .The material offers exceptional thermal performance at low pressures due to the unique filler Sheet size 8 x 8 package and ultra low modulus resin formulation . Standard 0.02,0.04,0.06,0.08,0.1,0.125 inch Thicknesses (0.5,1,1.5,2.0,2.5,3.18 mm ) BERGQUIST GAP PAD TGP 7000ULM ishighly conformal to rough or irregular surfaces, allowing excellent wet-out at the interface .Protective linersare supplied on both sides allowing for ease of use . STORAGE Store product in the unopened container in a dry location. Storage information may be indicated on the product container labeling. TYPICAL APPLICATIONS Telecommunications (routers, switches, base stations) Optimal Storage: 25 C (3), 50 % RH (10) for a 180 days shelf Optical transceivers life.Material removed from containers may be contaminated ASICs and DSPs during use. Do not return product to the originalcontainer. Henkel Corporation cannot assume responsibility for product which hasbeen contaminated or stored under conditions other TYPICAL PROPERTIES OF CURED MATERIAL than those previously indicated. Ifadditional information is Physical Properties required, please contact your local Technical Service Center or Hardness,Shore 000,ASTM D2240 75 Customer Service Representative. Inherent Surface Tack 2 Density ,ASTM D792,g/cc 3.2 Heat Capacity ,ASTM E1269,J/g-K 1.1 Shelflife,days 180 Young s Modulus kPa 152 (psi) (22)TDS BERGQUIST GAP PAD TGP 7000ULM, May -2019 Conversions (C x 1.8)+ 32 = F kV/mm x 25.4 = V/mil mm /25.4 = inches Nx 0.225 = lb/F N/mm x 5.71 = lb/in psi x 145 = N/mm MPa = N/mm Nm x 8.851 = lbin Nm x 0.738= lbft Nmm x 0.142= ozin mPas = cP Disclaimer Note: The information provided in this Technical Data Sheet (TDS) including the recommendations for use and application of the product are based on our knowledge and experience of the product as at the date of thisTDS.The product can have a variety of different applications as well as differingapplication and working conditions inyour environment that are beyond our control. Henkel is, therefore, not liablefor the suitability of our product for the production processes and conditions in respect of which you use them, as well as the intended applications and results. We strongly recommend that you carry out your own prior trialsto confirm such suitability of our product. Any liabilityinrespect of the information inthe Technical Data Sheet or any other written or oral recommendation(s) regarding the concerned product isexcluded, except ifotherwise explicitly agreed and except inrelation to death or personal injury caused by our negligence and any liabilityunder any applicable mandatory product liabilitylaw. In case products are delivered by Henkel Belgium NV, Henkel Electronic Materials NV, Henkel Nederland BV, Henkel Technologies France SAS and Henkel France SA please additionally note the following: Incase Henkel would be nevertheless held liable,on whatever legal ground, Henkels liabilitywill inno event exceed the amount of the concerned delivery. In case products are delivered by Henkel Colombiana, S.A.S.the following disclaimer is applicable: The information provided in this Technical Data Sheet (TDS) including the recommendations for use and application of the product are based on our knowledge and experience of the product as at the date of thisTDS. Henkel is, therefore, not liablefor the suitability of our product for the production processes and conditions in respect of which you use them, as well as the intended applications and results. We strongly recommend that you carry out your own prior trialsto confirm such suitability of our product. Any liabilityinrespect of the information inthe Technical Data Sheet or any other written or oral recommendation(s) regarding the concerned product isexcluded, except ifotherwise explicitly agreed and except inrelation to death or personal injury caused by our negligence and any liabilityunder any applicable mandatory product liabilitylaw. In case products are delivered by Henkel Corporation, Resin Technology Group, Inc., or Henkel Canada Corporation, the following disclaimer is applicable: The data contained herein are furnished for information only and are believed to be reliable. We cannot assume responsibility for the results obtained by others over whose methods we have no control. It is the user s responsibility to determine suitability for the user s purpose of any production methods mentioned herein and to adopt such precautions as may be advisable for the protection of property and of persons againstany hazards that may be involved inthe handling and use thereof. Inlight of the foregoing, Henkel Corporation specifically disclaims all warranties expressed or implied, including warranties of merchantability or fitness for a particular purpose, arising from sale or use of Henkel Corporations products. Henkel Corporation specifically disclaims any liability for consequential or incidental damages of any kind, including lost profits. The discussion herein of various processes or compositions isnot to be interpreted as representation that they are free from domination of patents owned by others or as a license under any Henkel Corporation patents that may cover such processes or compositions. We recommend that each prospective user test hisproposed application before repetitive use, using thisdata as a guide. Thisproduct may be covered by one or more United States or foreign patents or patent applications. Trademark usage: Except as otherwise noted Alltrademarks inthisdocument are trademarks and/or registered trademarks of Henkel and its affiliatesinthe U.S.and elsewhere. Reference 2 Americas Europe Asia +1.888.943.6535 +32.1457.5611 +86.21.3898.4800 For the most direct access to local sales and technical support visit: www.henkel.com/electronics