TechnicalData Sheet BERGQUIST LIQUI FORM TLF 6000HG March -2020 PRODUCT DESCRIPTION TYPICAL PROPERTIES OF CURED MATERIAL Thermally Conductive, One-Part, LiquidFormable GelMaterial. Physical Properties Viscosity ,Pas : -1 Technology Silicone 2,716 Low shear rate 1.0s ,ASTM D2196 Appearance Gray paste -1 617 Highshear rate 100 s ,ASTM D5099 Application Thermal management, (1) Dispense Rate ,EFD30cc syringe, 90psi , 17 Gel(1K) (1) grams/minute Application Method Dispense from cartridge Outgassing ,% total mass loss ,ASTM E595 ,% 0.16 Operating Temperature -60 to 200C Flammability Rating,UL 94 V-0 Range Electrical Properties 11 FEATURES AND BENEFITS Volume Resistivity ,500 V DC,ASTM D257 , 4.3710 ohm-meter Thermal Conductivity: 6.0W/m-K Dielectric Strength,ASTM D149,V/mm 10,500 Dispensable pre-cured gel DielectricConstant 1,000 Hz 7.95 Stable viscosity instorage and inthe application Excellent chemicalstability and mechanicalstability Thermal Properties Thermal Conductivity ,ASTM D5470 ,W/(m-K) 6.0 BERGQUIST LIQUIFORM TLF 6000HG thermally conductive gel interface material is designed to meet the demanding (1) 30cc syringe, 90 psi (621 kPa),0.100 orificeno attachment requirements incertain telecom market applications .Its unique formulation assures a balanced mix of high thermal conductivity, good dispensing efficiencyand high thermal GENERAL INFORMATION reliability. For safe handling information on this product, consult the Safety Data Sheet, (SDS). This material is specially designed to provide effective Not for product specifications electronic component cooling capability for 5G base station The technicaldata contained hereinare intendedas reference and remote antenna assembly where a highly reliablevertical only. Please contact your local quality department for gap stability is required .It is most effectivefor gaps as narrow assistance and recommendations on specifications for this as </= 3mm . BERGQUIST LIQUIFORM TLF 6000HG is product. pre-cured, requiring no mixing or refrigeration. CONFIGURATIONS AVAILABLE TYPICAL APPLICATIONS BERGQUIST LIQUIFORM TLF 6000HG is supplied in: RRU/AAU/BBU inwireless intelecom wireless Cartridges 150 cc infrastructure 300 cc Fillingvarious gaps between heat-generating devices to Pail 1 gal heat sinks 5 gal Devices requiring low assembly pressure Highvalue assemblies with rework STORAGE TYPICAL PROPERTIES OF UNCURED MATERIAL Store product inthe unopened container ina dry location. Storage information may be indicatedon the product container Density ,ASTM D792,g/cc 3.2 labeling. ShelfLife 25 C ,days 365 Optimal Storage: 25 C for a 365 day shelf life,in sealed containers with moisture barrier packaging.TDS BERGQUIST LIQUIFORM TLF 6000HG, March -2020 Conversions (C x 1.8)+ 32 = F kV/mm x 25.4 = V/mil mm /25.4 = inches Nx 0.225 = lb/F N/mm x 5.71 = lb/in psi x 145 = N/mm MPa = N/mm Nm x 8.851 = lbin Nm x 0.738= lbft Nmm x 0.142= ozin mPas = cP Disclaimer Note: The information provided inthis TechnicalData Sheet (TDS) includingthe recommendations for use and application of the product are based on our knowledge and experienceof the product as at the date of this TDS. The product can have a variety of differentapplications as well as differingapplication and working conditions inyour environment that are beyond our control. Henkelis, therefore, not liablefor the suitability of our product for the production processes and conditions inrespect of which you use them, as well as the intended applications and results. We strongly recommend that you carry out your own prior trials to confirm such suitability of our product. Any liabilityinrespect of the information in the Technical Data Sheet or any other written or oral recommendation(s) regarding the concerned product is excluded, except if otherwise explicitly agreed and except inrelation to death or personal injury caused by our negligenceand any liabilityunder any applicable mandatory product liabilitylaw. In case products are delivered by Henkel Belgium NV, Henkel Electronic Materials NV, Henkel Nederland BV, Henkel Technologies France SAS and Henkel France SA please additionally note the following: Incase Henkelwould be nevertheless held liable,on whatever legal ground, Henkels liabilitywill inno event exceed the amount of the concerned delivery. In case products are delivered by Henkel Colombiana, S.A.S.the following disclaimer is applicable: The information provided inthis TechnicalData Sheet (TDS) includingthe recommendations for use and application of the product are based on our knowledge and experience of the product as at the date of this TDS. Henkelis, therefore, not liablefor the suitability of our product for the production processes and conditions inrespect of which you use them, as well as the intended applications and results. We strongly recommend that you carry out your own prior trials to confirm such suitability of our product. Any liabilityinrespect of the information inthe TechnicalData Sheet or any other written or oral recommendation(s) regarding the concerned product is excluded, except ifotherwise explicitly agreed and except inrelation to death or personal injury caused by our negligenceand any liabilityunder any applicable mandatory product liabilitylaw. In case products are delivered by Henkel Corporation, Resin Technology Group, Inc., or Henkel Canada Corporation, the following disclaimer is applicable: The data contained hereinare furnished for information only and are believedto be reliable.We cannot assume responsibility for the results obtained by others over whose methods we have no control. It is the user s responsibility to determine suitability for the user s purpose of any production methods mentioned hereinand to adopt such precautions as may be advisable for the protection of property and of persons against any hazards that may be involved inthe handling and use thereof. Inlight of the foregoing, Henkel Corporation specifically disclaims all warranties expressed or implied, including warranties of merchantability or fitness for a particular purpose, arising from sale or use of Henkel Corporations products. Henkel Corporation specifically disclaims any liability for consequential or incidental damages of any kind, including lost profits. The discussion herein of various processes or compositions is not to be interpreted as representation that they are free from domination of patents owned by others or as a licenseunder any Henkel Corporation patents that may cover such processes or compositions. We recommend that each prospective user test his proposed application before repetitive use, using this data as a guide.This product may be covered by one or more UnitedStates or foreignpatents or patent applications. Trademark usage Except as otherwise noted, all trademarks inthis document are trademarks of HenkelCorporation inthe U.S.and elsewhere. denotes a trademark registered inthe U.S.Patent and Trademark Office. ReferenceN/A Americas Europe Asia +1.888.943.6535 +32.1457.5611 +86.21.2891.8000 For the most direct access to local sales and technical support visit: www.henkel.com/electronics