Temperature Sensor Glass Wire-Wound Resistance Element Type G0 (-200C to +400C) APPLICATIONS - Chemical and pharmaceutical industry Glass wire-wound for - Food industry severe applications - H.V.A.C. - Power generation plants - Analytical equipment - Aerospace industry -Marine SPECIAL FEATURES - Small dimensions - Good temperature stability - Abrasion resistant - High lead wire pull strength - Resistance to harsh environments (acid, oil, solvent, etc.) DESIGN One or two platinum bands wound on a solid glass core and homogeneously sealed with external tube. The lead wire connection has high pull strength. NOMINAL VALUE - 100 at 0C - Temperature coefficient = 3850 ppm/K TOLERANCE CLASS - IEC 751 : class B, A and B/3 - Closer tolerances in restricted temperature range TEMPERATURE RANGE - From -200C to +400C CONNECTION WIRES - Platinum coated nickel wires HOUSING ADVICE - May be used in most liquids without protection (water, oil, solvent, acid) RESISTANCE AND STABILITY - High vibration resistance - Resistant to external forces and pressure OPTIONS - Lead wire length - Extension cable - Glass shape (diameter, length, bend, etc.) -Ohmic values Attention : All technical data and recommendations concerning the products and services of our firm are for information purposes only. No data given in our technical datasheets guarantee particular properties to any products. They represent values obtained by experience and are intended as guidelines only. Seller reserves the right to make alterations in illustrations and technical data printed, resulting from further development. Heraeus Sensor Technology USA 1901 Route 130 North Brunswick, NJ 08902 Phone 732-940-4400 Fax 732-940-4445 Rev. 03-04 HSTUSA 10/09 Email info.hst-us heraeus.com www.hst-us.comStandard Product Type GO Desi- Nominal Self-heating Type Reference LWLD AL1 AL2 A Response time gnation reference in air Water Air v = 0,4 m/s v = 1 m/s t0,5 t0,9 t0,5 t0,9 (Ohm at 0C) (Dimensions in mm) (K/mW) (s) Class B 1Pt100 GO 1020 SB0789 100 10 6 2,0 15 - 0,25 0,26 0,14 0,35 7 21 1Pt100 GO 1327 SB0865 100 13 9 2,7 15 - 0,25 0,11 0,40 1,30 13 25 1Pt100 GO 1545 SB0862 100 15 9,5 4,5 15 - 0,25 0,09 0,80 2,40 16 40 1Pt100 GO 2327 SB0870 100 23 16 2,7 15 - 0,25 0,11 0,40 1,30 13 25 1Pt100 GO 3045 SB0873 100 30 21 4,5 15 - 0,25 0,09 0,80 2,40 16 40 2Pt100 GO 4845 SB0765 100 48 35 4,5 10 12 0,25 0,09 0,80 2,40 16 40 Class A 1Pt100 GO 1020 SB0794 100 10 6 2,0 15 - 0,25 0,26 0,14 0,35 7 21 1Pt100 GO 1327 SB0866 100 13 9 2,7 15 - 0,25 0,11 0,40 1,30 13 25 1Pt100 GO 1545 SB0863 100 15 9,5 4,5 15 - 0,25 0,09 0,80 2,40 16 40 1Pt100 GO 2327 SB0871 100 23 16 2,7 15 - 0,25 0,11 0,40 1,30 13 25 1Pt100 GO 3045 SB0874 100 30 21 4,5 15 - 0,25 0,09 0,80 2,40 16 40 Class B/3 1Pt100 GO 1020 SB0795 100 10 6 2,0 15 - 0,25 0,26 0,14 0,35 7 21 1Pt100 GO 1327 SB0867 100 13 9 2,7 15 - 0,25 0,11 0,40 1,30 13 25 1Pt100 GO 1545 SB0864 100 15 9,5 4,5 15 - 0,25 0,09 0,80 2,40 16 40 1Pt100 GO 2327 SB0872 100 23 16 2,7 15 - 0,25 0,11 0,40 1,30 13 25 1Pt100 GO 3045 SB0875 100 30 21 4,5 15 - 0,25 0,09 0,80 2,40 16 40 DIMENSIONAL TOLERANCES : L (length of body) = 2 mm D (diameter of body) = 0,2 mm AL (connection wire length) = 2 mm A (connection wire diameter) = 0,02 mm Attention : All technical data and recommendations concerning the products and services of our firm are for information purposes only. No data given in our technical datasheets guarantee particular properties to any products. They represent values obtained by experience and are intended as guidelines only. Seller reserves the right to make alterations in illustrations and technical data printed, resulting from further development. Rev. 03-04 HSTUSA 10/09