0036 Heyco

Stay Connected with Strain Relief Bushings Heyco Original Strain Relief Bushing Assembly Pliers Instructions and Spare Parts DESCRIPTION SPARE PART NO. for 0022 for 0030 Drawing R 29 Plier R 30 Plier Ref. No. 2 (1) MOVABLE HANDLE Grips 0037 0047 1 (2) MOVABLE JAW (3) JAW HANDLE 3 Pivot Screw 0036 0046 4 4 5 (4) PIVOT SCREW 6 (5) NUT Nut 0032 0032 5 (6) SPRING 1 Spring 0031 0031 6 Assembly Instructions: Part No. 0022 R 29 Pliers are shipped set for a 1/4 (6,4 mm) opening. Part No. 0030 R 30 Pliers are shipped set for a 37/64 (14,7 mm) opening. These Pliers will assemble the majority of our Heyco Original Strain Relief Bushings (see Directory, opposite). If adjustment is necessary, follow the instructions below: Position on Wire A. Remove Nut (5) and Spring (6). B. Close Pliers and lift off Movable Handle (1). C. Move Jaw (2) to desired opening (see Directory, opposite). D. Reassemble Handle (1) in closed position so that the gear teeth engage. E. Open Pliers and replace Spring (6) with short end in deepest recess, long end in Handle groove. Squeeze Pliers F. Replace and secure Nut (5). See opposite page for alternative jaw openings. For Original Strain Relief Assembly Air Tools, see page 4-29. Push into Double D Mounting Hole 4-27 1-800-526-4182 732-286-1800 (NJ) FAX: 732-244-8843 www.heyco.comX-ON Electronics Largest Supplier of Electrical and Electronic Components Click to view similar products for Pliers & Tweezers category: Click to view products by Heyco manufacturer: Other Similar products are found below : 0031 32750 PN-5050/38D PG-TP-30D 4-1532129-2 77 12 115 0037 T0058765801 RT400SGSET2 571 76C MICROFOX-SP-1 DB 37 31 125 RX 8130 37 33 125 DRP10N 36 12 130 0036 64 11 115 0032 T3627B 7 64 02 115 ESD 6211-06 6214-45 6231-07 6231-08 6411- 06 DP20N PN 5050/10D TR 20 M TR 25 15 TR 25 P A TR 30 58 R A TR 30 V TR 5000 TR 5000 PG MICROFOX-SP DB CUTFOX-SE LM CUTFOX-SE LM DB FMHT0-80519 TR 58 R A 27388 43333 102ACAX 103ACA 141SAP 150SAD 150SAMB 150SAMF 151SA