Meets ANSI/ESD S20.20, Packaging standard ANSI/ESD S541, and
Static Shielding Bag 1000 Series
Static Control Bag ANSI/ESD S11.4 Level 3
This transparent metal-in static shielding bag is designed to provide a static
Physical Typical Value Testing Method
safe environment for sensitive electronic devices. Bags are printed with an
Tensile Strength 4600 PSI, 32 MPa ASTM D882
ESD protective symbol and a lot code for traceability. Open top (1000) and
ZipTop (3000) styles are available. The bags are heat sealable.
Puncture Resistance 12 lbs, 53 N MIL-STD-3010C Method
2065
SCS Static Shielding Bags 1000 are manufactured from a polyester, metal,
Seal Strength 11 lbs, 48 N ASTM D882
polyethylene laminate. The polyester dielectric in concert with the metal layer
provides discharge shielding. The exterior being static dissipative allows
Thickness 2.8 mils, 0.071 mm +/-10% MIL-STD-3010C Method
electrostatic charges to be removed when grounded.
1003
Open Top Bag
ZipTop Bag
Marking Adhesion Pass IPC-TM-650 2.4.1
Open Top Bag ZipTop Bag
Transparency 40% Tobias
Electrical Typical Value Testing Method
ESD Shielding <10 nJ ANSI/ESD STM11.31
4 11
Surface Resistance - 1 x 10 to < 1 x 10 ohms ANSI/ESD STM11.11
Interior
11
Surface Resistance - < 1 x 10 ohms ANSI/ESD STM11.11
Exterior
Static Decay < 2 seconds ETS 406D
Cleanliness Typical Value Testing Method
Silicone Not Detected FTIR
Tolerance (inches): Width -0, +0.250 Length +/- 0.125 Offset O to 0.250
Tolerance: Width -0, +1/4" Note: Standard bag markings shown above and
Seal width +/- 0.125
Heat Sealing Conditions Typical Value
Length +/- 1/8" Offset 0 to 1/4" are not to scale.
Seal width 3/8" with a tolerance of +/- 1/8"
Temperature 300F 375F, 149C 190C
Time 0.5 3.5 seconds
Pressure 30 70 PSI, 206 482 KPa
Bag is free of amines, silicones and heavy metals.
This product is intended for commercial use only. This product is not on
the Qualified Product Listing under the Defense Standardization Program.
RoHS 2, REACH, and Conflict Minerals Statement
None of the RoHS 2 restricted materials or REACH substances of very high concern as
Made in the
of 2017/01/12, or Conflict Minerals are intentionally added in manufacturing this product. Specifications and procedures subject to change without notice.
United States of America
Ref: European Union Directive 2011/65/EU and Regulation (EC) No. 1907/2006/CE.
See SCS Warranty, Limitation of Liability and Remedies
1000 SERIES STATIC SHIELDING BAG
DRAWING
DATE
926 JR Industrial Drive, Sanford, NC 27332
WEB SITE: StaticControl.com NUMBER
April
PHONE (919) 718-0000
2017
1000 Series
2017 DESCO INDUSTRIES INC.
Employee Owned