Stay Connected with Liquid Tight Conduit, Tubing & Fittings Heyco-Flex III Liquid Tight Fittings For Flexible, Nonmetallic Liquid Tight Tubing Straight-Thru, Snap -in and NPT Hubs For use with Heyco-Flex III Corrugated FITS PART NO. DESCRIPTION THREAD PART DIMENSIONS Tubing in trade sizes 3/8 through 1. TUBING SIZE AB C D E TRADE Black Clearance Max O.A. Thread Wrenching See page 2-1. SIZE Hole Length Length Nut Thk. Flat Size Nontoxic and UV resistant. in. mm. in. mm. in. mm. in. mm. in. mm. Rated for NEMA 4 and 4X applications Snap-in Hub* when used with Heyco-Flex III Tubing. 1/2 1952 HF3C 1/2-S N/A .875 22,2 1.38 35,1 .39 9,9 .09 2,3 .97 24,6 Rated for NEMA Type 3R applications. NPT Hubs 3/8 9146 HF3C 3/8 3/8 Easy, permanent assembly between .875 22,2 1.72 43,7 .63 16,0 .20 5,1 1.16 29,5 1/2 9147 HF3C 1/2 1/2 the tubing and fittings: push the 3/4 9148 HF3C 3/4 3/4 1.109 28,2 1.84 46,7 .63 16,0 .20 5,1 1.36 34,5 tubing over the fitting ferrule until 1 9149 HF3C 1 1 1.375 34,9 1.99 50,6 .78 19,8 .20 5,1 1.62 41,1 the tubing clicks into place. Lightweight and lower installed cost. *Part is not liquid tight or UL Recognized. Thread Length indicates length below flange. Quick and easy installation. B C Suitable for use in high vibration or D flexing applications (automotive equipment, fiber optics, computer E and peripherals, lab equipment, robotics, etc.). Resist salt water, weak acids, A OPTIONAL SEALING WASHER LOCKNUT gasoline, alcohol, oil, grease, and SUGGESTED CLEARANCE HOLE common solvents. This feature is not FOR NON-THREADED MOUNTING assessed by UL certification or testing. 90 Sweep, NPT Hubs For use in both wet and dry applications. FITS PART NO. DESCRIPTION THREAD PART DIMENSIONS TUBING SIZE AB C D E If using a tapped hole, Teflon tape is TRADE Black Clearance Max O.A. Max O.A. Thread Flange needed on the threads of the connector, SIZE Hole Height Length Length Dia. for all other applications an O-ring and in. mm. in. mm. in. mm. in. mm. in. mm. Locknut are needed to attain liquid tight. 3/8 1955 HF3C 3/8-90R 3/8 .875 22,2 1.75 44,5 2.74 69,6 .52 13,2 1.23 31,2 Use of an O-ring may be required 1/2 1956 HF3C 1/2-90R 1/2 for a complete liquid tight system 3/4 1957 HF3C 3/4-90R 3/4 1.109 28,2 2.10 53,3 3.08 78,2 .52 13,2 1.50 38,1 with a non-threaded mounting hole. 1 1958 HF3C 1-90R 1 1.375 34,9 2.67 67,8 3.66 93,0 .69 17,5 1.80 45,7 See page 2-20. Standard color black. Locknuts included with Straight-Thru C fittings. To order metal or nylon locknuts separately, see pages 2-17 & 2-18. B Patented. D E SUGGESTED CLEARANCE HOLE FOR NON-THREADED MOUNTING A Material Nylon 6/6 Quick Certifications Certified to both Canadian and U.S. Requirements File E121095 Flammability Rating 94V-2 Temperature Range -22F (-30C) to 221F (105C) Specs IP Rating IP 64 1-800-526-4182 732-286-1800 (NJ) FAX: 732-244-8843 www.heyco.com 2-2X-ON Electronics Largest Supplier of Electrical and Electronic Components Click to view similar products for Spiral Wraps, Sleeves, Tubing & Conduit category: Click to view products by Heyco manufacturer: Other Similar products are found below : 601203-000 CTA-0053 8426-11 8429-9 8445-7.5 8450 120-104-24 120-113-16B 120-116-1-1-09BE 120-116-1-1-09BF 120-116-1-1-09BP 120-116-1-1-12BE 120-116-1-1-12BP 120-116-1-1-20BP 120-116-1-1-32BE 120-117-40 120-123-06 120-123-10 120-123-14 120-123-16 120-125-12BL 120-125-12R 120-125-16 120-125-16R 120-125-16Y 120-125-20R 120-125-24Y 120-125-28 120-125-28R 120-125-32 120-125-32R 120-125-40 120-125-56 120-126-09 120-126-09BL 120-126-12 120-126-12BL 120-126-14 120-126-16 120-126-16BL 120- 126-20 120-126-20BL 120-126-20R 120-126-24 120-126-28 120-126-32 120-126-40BL 120-126-52 120-126-52BL 120-104-12