2mm Double-Row Connector (Product Compliant to UL/CSA Standard) DF11 Series Features 1. Space-saving on Board Realized Double rows of 2mm pitch contact has been condensed within the 5mm width. The multiple number of signals can be secured in the same space as the conventional 2mm single-row contact. 2. Broad Variation The insulation displacement and crimping methods are prepared for connection. Thus, board to cable, in-line, board to board connectors are provided in order to widen a board design variation. Rib to prevent In addition,Gol orTi can be selected for the plating Simple lock mis-insertion according application, while the SMT products line up. 3. Applicable Wire Covers Wide Range Rib to prevent contact According to the double rows of 2mm pitch compact mis-insertion as well as design, the applicable wire can cover AWG22 to 30. disimilar contact mis-insertion 4. The ID Type Connector Achieves Connection Work. Using the full automatic insulation displacement machine, the complicated multi-harness can be easily connected, reducing the man-hour and eliminating the manual work process. 5mm 4 wall box style Applications Business equipments such as copy machine, printer and so on. B220 Dec.1.2018 Copyright 2018 HIROSE ELECTRIC CO., LTD. All Rights Reserved.DF11 Series2mm Double-Row Connector (Product Compliant to UL/CSA Standard) Features of DF11 Insulation Displacement Machine ( ) Single Core Punching Full Automatic ID Machine AM700/DF11 5 Major Features of ID Machine AM700/DF11 Low cost Multi-harness 1. Perform the multi-harness. Data storage 2. The setup time has been widely reduced. (10 minutes maximum) Setup in 10 minutes Half space 3. Space saving design. (About half space compared with the conventional machine) 4. Minimize initial cost with low cost. 5. The harness data can be saved in the floppy disk and easily changed. Points Since the DF11 insulation displacemention allows double rows ID with a single part, the harness service is completed with machine connection only. Product Specifications AWG 22 to 26 : 2A Operating Temperature Range -30 to 85 Note 2 Current rating Crimping Wire size AWG 28 : 1A Operating Humidity Range 40 to 80% Rating (Note 1) AWG 30 : 0.5A Insulation Displacement Wire size AWG 26 : 1A Storage Temperature Range -10 to 60 Note 3 Voltage rating Crimping 250V AC Insulation Displacement 100V AC Storage Humidity Range 40 to 70% UL CSA Safety Standard File No. UL-CSA Safety Standard Approved Specification UL :E52653 AWG 22 : 2A CSA :LR95109 Current rating Wire size AWG 24 to 28 : 1A Rating AWG 30 : 0.5A Voltage rating 30V AC Item Specification Condition 1. Insulation Resistance 1000M ohms min. 500V DC 2. Withstanding voltage No flashover or insulation breakdown. 650V AC/1 minute 3. Contact Resistance 30m ohms max. 100mA 4. Single Insertion/Extraction Force 0.3N (30gf) min., 4.4N(450gf) max. Measured by the square steel-made pin of 0.50.002mm 5. Vibration No electrical discontinuity of 1s or more Frequency: 10 to 55 Hz, single amplitude of 0.75 mm, 2 hours in each of the 3 directions. 6. Humidity (Steady state) Contact resistance: 30m ohms max. Insulation resistance: 500M ohms min. 96 hours at temperature of 40 and humidity of 90% to 95% (-55: 30 minutes 5 to 35: 5 to 15 minutes 7. Temperature Cycle Contact resistance: 30m ohms max. Insulation resistance: 1000M ohmsmin. (-85: 30 minutes 5 to 35: 5 to 15 minutes) 5 cycles Tin plated: 30 cycles 8. Durability (Mating/un-mating) Contact resistance: 30m ohms max. Gold plated:50 cycles Flow: Manual soldering: 260 for 10 seconds 300 for 2 seconds 9. Resistance to Soldering heat No deformation of components affecting performance. Reflow: Manual soldering: At the recommended temperature profile 300 for 3 seconds Note 1: Current rating of header is 2A. Note 2: Includes temperature rise caused by current flow. Note 3: The termstorag refers to products stored for long period of time prior to mounting and use. Operating Temperature Range and Humidity range covers non conducting condition of installed connectors in storage, shipment or during transportation. Note 4: Information contained in this catalog represents general requirements for this Series. Contact us for the drawings and specifications for a specific part number shown. B221 Dec.1.2018 Copyright 2018 HIROSE ELECTRIC CO., LTD. All Rights Reserved.