The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative. 2mm Pitch Connector for Discrete Wire Connection(Product approved by UL CSA Standard) DF3 Series Features Correspond to Board Design in Wide Variation ID Socket (1) Low profile design with the mounting height of 6.8mm (2) Achieves the multi-harness by the full automatic ID machine in combination with the DF11 series ID type. (DF11 series represents the 2mm pitch single-row product.Please refer to page B220 to B233.) Crimp Socket (1) Low profile design with mounting height 7.5mm. (2) Provide the contact crimping area with the sufficient space, and secures the stable crimping operation. Receptacle (1) The board can be connected horizontally or vertically in combination with the straight header with the right angle header. (2) For horizontal connection, the board to board size is the low profile of 6.6mm. (3) Compatibility with the in-line plug allows the receptacle to set the board side to the receptacle and the cable side to the plug in the board to cable connection. Pin Header (1) The board pre-fixed kink is treated with the post pin. (2) The style employs a scoop-proof and sturborn box type. (3) The type corresponding to SMT is avilable, using the heat-proof resin. This SMT header is equipped with the metal tab to prevent peeling in the solder joint area. In-line Plug (1) The crimping in-line plug consits of two types, one type, which has pursued after space merits, and the other employs the panel lock type, which can be fixed to the panel. (2) The in-line adapter is available to insert and in-line the ID socket from both sides. Applications Business equipment such as copy machine and printer B207The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative. DF3 Series 2mm Pitch Connector for Discrete Wire Connection(Product approved by UL CSA Standard) Product Specifications AWG 22 to 24 :3A Operating Temperature Range -30 to +85 Note 2. Current rating Crimping Wire size AWG 26 :2A Operating Humidity Range 40% to 80% Rating Note 1 AWG 28 :1A Storage Temperature Range -10 to +60 Note 3. IDC Wire size AWG 26, 28:1A Storagg Humidity Range 40% to 70% Note 3. Voltage rating AC100V Crimping Press-fit: 250V AC IDC Press-connect: 100V AC UL CSA Safety Standard File No. UL-CSA Safety Standard and Approved specification UL :E52653 CSA :LR95109 Rated Current Wire size AWG 24 to 28: 1A Rating UL CSA Acquisition Objective Item 1DF3-*S-2C Rated Voltage 30V AC 2DF3/3A-*P-2DSA/DS 3DF3/DF3AA-*EP-2C 4DF3-*S-2R26/28 5DF3-*P-2H Item Specification Condition 1. Insulation Resistance 1000M ohms min. 500V DC 2. Withstanding voltage No flashover or insulation breakdown. 650V AC/1 minute 3. Contact Resistance 30m ohms max 100mA 4. Single Insertor/Extraction Force MIN0.3N (30gf), MAX4.4N(450gf) Measure by the square steel pin with 0.50.002mm 5. Vibration No electrical discontinuity of 1s or more Frequency: 10 to 55 Hz, single amplitude of 0.75 mm, 2 hours in each of the 3 directions. 6. Humidity (Steady state) Contact resistance: 30m ohms max.Insulation resistance: 500M ohms min. 96 hours at temperature of 40 and humidity of 90% to 95% 7. Temperature Cycle Contact resistance: 30m ohms max.:Insulation resistance: 1000M ohms min. (-55: 30 minutes 5 to 35: 10 minutes 85: 30 minutes 5 to 35: 10minutes) 5 cycles 8. Durability (Mating/un-mating) Contact resistance: 30m ohms max. Tin plating: 30 cycles Gold plating: 50 cycles Flow: 260 for 10 seconds Manual soldering: 300 for 2 seconds 9. Resistance to Soldering Heat No deformation of components affecting performance. Reflow: At the recommended temperature profile Manual soldering: 300 for 3 seconds Note 1: Current rating of header is 3A. Note 2: Includes temperature rise caused by current flow. Note 3: The termstorag refers to products stored for long period of time prior to mounting and use. Operating Temperature Range and Humidity range covers non conducting condition of installed connectors in storage, shipment or during transportation. Note 4: Information contained in this catalog represents general requirements for this Series. Contact us for the drawings and specifications for a specific part number shown. Material Part Materia Finish Remarks Product Crimping Socket Insulator Polyamide Black UL94V-0 IDC Contact for Socket Contact Phosphor bronze Tin plated or gold plated Insulator Polyamide Black UL94V-0 ID Socket Contact Phosphor bronze Tin plated or gold plated Insulator Polyamide Black UL94V-0 Receptacle Contact Phosphor bronze Tin plated or gold plated Insulator Polyamide Black UL94V-0 Pin Header Contact Brass Tin plated or gold plated Insulator Polyamide Beige UL94V-0 SMT Pin Header Contact Brass Tin plated or gold plated Metal tab Brass Tin plated In-line Plug Insulator Polyamide Black UL94V-0 In-line IDC Contact Contact Phosphor bronze Tin plated or gold plated Insulator Polyamide Black UL94V-0 In-line Adapter Contact Brass Tin plated B208
