142PC15A Honeywell

GENERAL OPERATING CHARACTERISTICS NOTES: CATALOG LISTING TYPE OPERA TING 140PC15 SERIES CHART 1 1 - INPUT MEDIA: PRESS URE RANGE PRESSURE RANGE 0 TO 775 mmHg (0 TO 15 PSI) P1 - DRY GASES ONLY: CONNECTION SIDE OF SENSOR 141PC15D 1 D 0 TO -14.7 PSID OVERPRESSURE 45 PSIG P2 - LIMITED ONLY TO THOSE MEDIA THAT WILL NOT ATTACK 141PC15G 1 G 0 TO -14.7 PSIG TEMPERATURE RANGES POLYESTER, SILICON OR SILI CONE BASED ADHESIVE 142PC15A 1 A 0 TO 1 5 PSIA 2 - TERMINALS ARE PLATED FOR SOLDERI NG C 1 D 0 TO 15 PSID STORAGE -55 TO +125 C 3 - LIMIT SOLDERING TO 315 C MAX FOR 10 SECONDS MAX 142PC15G 1 G 0 TO 1 5 PSIG OPERATING -40 TO +85 C 4 - UNITS ARE OF PLASTIC CONSTRUCTIO N 6 142PC15A104 A 0 TO 1 5 PSIA COMPENSATED -18 TO 63 C 5 - P2 - MATERIAL SELECTED FOR RESISTANCE TO GASOLINE AND GASOLINE VAPORS SUPPLY VOLTAGE 7 TO 16 VDC 7.1 6 - SPECIAL OP-AMP LEADED SUPPLY CURRENT 20mA MAX WITH 10K LOAD OUTPUT PROPORTIONAL TO SUPPLY VOLTAGE VOLTAGE OVER ABOVE RECOMMENDED RANGE SHORT CIRCUIT LIMIT MAY BE SHORTED INDEFINITELY 12.6 OUTPUT RIPPLE NONE GROUND REFERENCE SUPPLY AND OUTPUT ARE COMMON ELECTRICAL PERFORMANCE AT 25 C AND 8.00 .01 VDC SUPPLY OUTPUT VOLTAGE 141PC15D NULL (0 PSIG) 1.000 .050 VDC FULL SCALE (-15 PSIG) 6.000 VDC TYP P1 > P2 SPAN 5.000 .050 VDC 141PC15G NULL (0 PSIG) 1.000 .050 VDC FULL SCALE (-12.5 PSIG) 5.167 VDC TYP P1 > P2 5.08 SPAN 4.167 .050 VDC +1.0 3X 0.25 X 0.51 TERMINALS 2.5 5.08 142PC15D OR G -0.4 NULL (0 PSIG) 1.000 .050 VDC FULL SCALE (15 PSIG) 6.000VDC TYP P2 > P1 SPAN 5.000 0.05 VDC SENSITIVITY 333.3 mV/PSI TYP LINEARITY (B.F.S.L.) .75% SPAN MAX P1 > P2 18.5 17.9 1.50% SPAN MAX P2 > P1 HYSTERESIS & REPEATABILITY .15% SPAN TYP TEMPERATURE ERROR -18 C TO +63 C 1.00% SPAN MAX -40 C TO +85 C 1.50% SPAN TYP 10.0 142PC15A / 142PC15A104 NULL (0 PSIA) 1.000 VDC TYP REFERENCE (2 PSIA) 1.667 .050 VDC FULL SCALE (15 PSIA) 6.000 VDC TYP P1 > P2 2X 5.00 SPAN (2 TO 15 PSIA) 4.333 .050 VDC SENSITIVITY 333.3 mV/PSI TYP 59.8 LINEARITY (B.F.S.L.) .87% SPAN MAX METRIC INCHES HYSTERESIS & REPEATABILITY .17% SPAN TYP 0.25 .010 TEMPERATURE ERROR 0.4 .016 INPUT PORT (P1) -18 C TO +63 C 1.15% SPAN MAX 0.51 .020 1.0 .039 -40 C TO +85 C 1.73% SPAN TYP 2X ( 1.50) INPUT PORT (P2) 1.50 .059 REVISIONS 2.5 .10 ATMOSPHERIC VENT (P1) A 205031 3.52 .139 INPUT PORT (P1) G J W 13MAR02 INPUT PORT (P2) 5.00 .197 B 0004623 5.08 .200 DVM 15APR04 6.1 .24 C 0024484 .28 7.1 CMH 05SEP06 10.0 .39 0064472 D 12.3 .48 PRS 12.6 .50 19MAY10 6.1 16.2 .64 30.0 17.9 .70 P1 P2 P1 P2 P1 P2 18.5 .73 30.0 1.18 52.40 2.063 59.8 2.35 THIRD ANGLE PROJECTION SCALE 2 : 1 TYPE (GAGE) TYPE (ABSOLUTE) DO NOT SCALE PRINT 2X 3.52 16.2 12.3 TOLERANCES MOUNTING HOLES APPLY TO DESIGN UNITS. CONVERSIONS A RE ONLY FOR + REFERENCE. UNLESS NOTED, TOLERANCE S ARE - DIM. TOL DIM. TOL 52.40 mm/in in mm/in THIS DRAWING COVERS A PROPRIETARY ITEM AND IS THE PROPERTY OF MICRO SWITCH. A DIVISION OF mm NO PLACES X 1/.04 X.X 0.8/.03 HONEYWELL. THIS DRAWING IS NOT TO BE C OPIED OR USED WITHOUT THE APPROVAL OF MICRO SWITCH. ONE PLACE X,X 0.4/.01 6 X.XX 0.38/.015 TWO PLACES X,XX 0.15/.0 06 X.XXX 0.13/.005 CATALOG LISTING THREE PLACES TYPE (DIFFERENTIAL) ANGLES SI METRIC US CUSTOMARY 140PC15 SERIES CHART 1 PRESSURE TRANSDUCER X DESIGN UNITS Honeywell Division WEIGHT ANSI Y14.5M-1982 APPLIES FED. MFG. CODE 91929 31 G ISSUE 22 140PC15 SERIES CHART 1 DRAWING 2D PTC/CAD NUMBER DRAWN PAGE 1 OF 1 CHECK CHECK CHECK RELEASE NO. REPLACES - G J W 13 MAR 02 - AK 15 APR 04 RS 19MAY10 SAV 13 MAR 02 OUT GND IN+