Miniature Low Pressure Flow-Through Sensors 26PC Series, Compensated/Unamplified 1 psi to 100 psi DatasheetMiniature Low Pressure Flow-Through Sensors The 26PC Series Miniature Low Pressure Flow-Through Sensors feature proven sensing technology that uses a specialized piezoresistive micromachined sensing element to offer high performance, reliability, and accuracy. Each sensor contains four active piezoresistive elements in a Wheatstone bridge configuration. When pressure is applied, the resistance changes and provides an output signal in mV proportional to the input pressure. The low power, compensated, unamplified Wheatstone bridge circuit design offers 1 psi through 100 psi sensing ranges in a variety of pressure port types and termination configurations. The mV output is available in both negative and positive voltage. Visit www.honeywell.com/sensing to download 3D CAD drawings in IGES and STEP format, and 2D drawings in PDF format. These sensors are intended for use with media compatible with plastics and media seals specified in the Nomenclature and Order Guide (see Figure 2). (2D drawings also provide plastic housing and port material information.) They are designed and manufactured according to ISO 9001 standards. What makes our sensors better 26PCXXG6G Selectable seals available to match media used 26PCXXG6D Higher pressure ranges for use in high pressure applications Minimal dead space inhibits bacterial growth Available in both SIP and DIP packages Available with cable harness to allow off-board sensing 26PCXXP5G For all available configurations, see Figure 3. MiniMal DeaD Space cable HarneSS aVailable SelecTable SealS sensing.honeywell.com 2