RPN Series Hall-Effect Rotary Position Sensors DESCRIPTION Five different supply voltages and eight different output RPN Series Rotary Position Sensors use a magnetically configurations, in either mA or Vdc, improve compatibility with biased, Hall-effect integrated circuit (IC) to sense rotary a variety of control systems. movement of the actuator shaft over a set operating range. Rotation of the actuator shaft changes the ICs position relative Two versions provide dual outputs for use where an additional to the magnets. The resulting flux density change is converted output may be desired where redundancy and backup is to a linear output. needed. Another potential application includes using one output for an indicator and the second for the control system. The IC, together with conditioning and protection circuitry, and two permanent magnets, is sealed in a rugged package of Lever versions are available. The easy-to-mount sensor has a IP67 or greater for durability in most harsh environments. mounting flange with two round or oval mounting holes. All products have AMP or Deutsch receptacles. Solid-state Hall-effect technology provides non-contact operation, long service life, low torque actuation and reduced wear-out mechanisms. Eight operating ranges (50, 60, 70, 90, 120, 180, 270 and 360) are tolerant to over travel and allow use in most common applications. FEATURES POTENTIAL APPLICATIONS Solid-state Hall-effect technology Position and movement detection of pedals, throttle, gear shift, Eight operating ranges, up to 360 levers, linkages, suspension and hitches in: Variety of supply voltages and output configurations Trucks Rugged sealed package with integral connector Off road vehicles IP67 or greater Industrial vehicles and equipment Integrated reverse polarity, short circuit and EMC protection Construction vehicles and equipment Single or dual output versions available Agricultural vehicles and equipment Industry-standard termination Cranes RPN Series Table 1. RPNR Redundant (Dual) Output Specifications Characteristic Parameter Operating ranges available 50 (25), 90 (45) Output available 50 (25): Channel 1: 4 mA (left), 20 mA (right) Channel 2: 0.25 Vdc (left), 4.75 Vdc (right) 90 (45): Channel 1: 0.25 Vdc (left), 4.75 Vdc (right) Channel 2: 4.75 Vdc (left), 0.25 Vdc (right) Supply voltage range(s) 50 (25): Channel 1: 8.5 Vdc Channel 2: 5 Vdc available 90 (45): Channel 1: 10 Vdc to 30 Vdc Channel 2: 10 Vdc to 30 Vdc Current consumption 20 mA max. Output signal delay 3 ms approx. Accuracy 1.6% Hysteresis none Linearity RPNR050SDMEC3A21X 0.35 RPNR090KAAA3A11X 0.6 Reverse polarity protection yes Operating and storage -40 C to 125 C -40 F to 257 F temperature range EMC 200 V/m ISO 11452-3 6 Expected life 30x10 cycles Protection class IP69K DIN 40050 Housing material PA66 plastic Shaft material stainless steel Termination AMP 1-1419168-1 Mechanical end stop no Table 2. RPNS Single Output Specifications Characteristic Parameter Operating ranges available 50 (25), 60 (30), 70 (35), 90 (45), 120 (60), 180 (90), 270 (135), 360 (180) Outputs available 0.25 Vdc (left), 4.75 Vdc (right) 4 mA (left), 20 mA (right) 0.5 Vdc (left), 4.5 Vdc (right) 20 mA (left), 4 mA (right) 1 Vdc (left), 9 Vdc (right) 3 Vdc (left), 5 Vdc (right) 4.5 Vdc (left), 0.5 Vdc (right) 4.75 Vdc (left), 0.25 Vdc (right) Supply voltage range(s) available 5 Vdc, 8 Vdc to 30 Vdc, 10 Vdc to 30 Vdc Current consumption (maximum) 20 mA Output signal delay (approx) 3 ms Reverse polarity protection yes EMC 200 V/m ISO 11452-3 Operating and storage temperature range -40 C to 125 C -40 F to 257 F Protection class IP67 DIN 40050 Accuracy 1.6% Hysteresis none Linearity RPNS050BB1A21X, RPNS050FA1A21X 0.35 RPNS060AC1A21X 0.6 RPNS070DD1A21X 1 All other listings 2 RPNS120AA1A21X 5 Housing material PA66 plastic Shaft material stainless steel 6 Expected life 30x10 cycles Termination AMP Superseal 282087-1, Deutsch DT04-3P Mechanical end stop no 2 www.honeywell.com/sensing