SD5610-001 Honeywell

SD5600/5610 Optoschmitt Detector FEATURES TO-46 metal can package 6 (nominal) acceptance angle High noise immunity output TTL/LSTTL/CMOS compatible Buffer (SD5600) or inverting (SD5610) logic available Mechanically and spectrally matched to SE3450/5450, SE3455/5455 and SE3470/5470 infrared emitting diodes INFRA-81.TIF DESCRIPTION OUTLINE DIMENSIONS in inches (mm) The SD5600/5610 series is a family of single chip Tolerance 3 plc decimals 0.005(0.12) Optoschmitt IC detectors mounted in a TO-46 metal can 2 plc decimals 0.020(0.51) package. The photodetector consists of a photodiode, amplifier, voltage regulator, Schmitt trigger and an NPN output transistor with 10 k (nominal) pull-up resistor. Output rise and fall times are independent of the rate of change of incident light. Detector sensitivity has been internally temperature compensated. The TO-46 package is ideally suited for operation in hostile environments. Device Polarity: Buffer - Output is HI when incident light intensity is above the turnon threshold level. Inverter - Output is LO when incident light intensity is above the turnon threshold level. DIM 025.cdr Honeywell reserves the right to make changes in order to improve design and 176 h supply the best products possible.SD5600/5610 Optoschmitt Detector ELECTRICAL CHARACTERISTICS PARAMETER SYMBOL MIN TYP MAX UNITS TEST CONDITIONS ABSOLUTE MAXIMUM RATINGS SCHEMATIC (25C Free-Air Temperature unless otherwise noted) Supply Voltage 16 V Duration of Output Short to V or Ground 1.0 sec Output Current 18 mA Operating Temperature Range -40C to 100C Storage Temperature Range -55C to 125C Soldering Temperature (10 sec) 260C Notes 1. Derate linearly from 25C to 7 V at 100C. Honeywell reserves the right to make changes in order to improve design and 177 h supply the best products possible.