XPC01DTC Honeywell

XPC/XPCL Series and XPXL Series Compensated/Calibrated and Uncompensated/Uncalibrated Board Mount Pressure Sensors DESCRIPTION The XPC/XPCL Series and XPXL Series sensors integrate On devices of 5 psi and above, the top side of the chip is silicon micromachined sensing technology, temperature protected against humidity by a Silgel coating. compensation, and calibration in a complete family of low-cost packages. This series offers a cost-effective solution for design Although the sensors are designed for use with noncorrosive, requirements. nonionic pressure media, they accommodate many gases that are used in medical applications. These piezoresistive pressure sensors use micromachined silicon chips mounted on ceramic and protected with a plastic cap. Several tube arrangements with nylon housings are available for various pressure applications. FEATURES POTENTIAL APPLICATIONS Low cost, small size Medical applications Temperature compensated Applications requiring small size Zero and span calibrated Applications requiring vacuum and positive pressure Millivolt output reference or both Differential, gage and absolute pressure Constant voltage excitation High impedance - low current XPC/XPCL Series and XPXL Series Table 1. Electrical Specifications Characteristic XPC/XPCL at 12 Vdc, 25 C 77 F XPXL at 5 Vdc, 25 C 77 F Unit Min. Typ. Max. Min. Typ. Max. Excitation voltage 3.0 12.0 16.0 3.0 5.0 12.0 Vdc Null -1.0 0 1.0 -50 0 50 mV 1 Offset temperature shift 1.0 0.5 mV 0 C to 25 C 32 F to 77 F 25 C to 70 C 77 F to 158 F 1 Full scale temperature shift -1800 2 % span 0 C to 25 C 32 F to 158 F PPM/ C 25 C to 70 C 77 F to 158 F 2 0.25 1.0 0.25 1.0 % span Linearity, hysteresis error Input resistance 5.0 3.0 kOhm Output resistance 3.0 3.0 kOhm Operating temperature -25 -13 85 185 -25 -13 85 185 C F Storage temperature -40 -40 125 257 -40 -40 125 257 C F Common mode pressure 50 50 psi Notes: 1. Shift is relative to 25 C 77 F . 2. Measured at 1/2 full scale rated pressure using BFSL. Table 2. Absolute Output FS Pressure XPC at 12 Vdc, 25 C 77 F Overpressure Output Full Scale Span (mV) (psi) Min. Max. Max. Max. 5 psi 57 60 63 15 15 psi 85 90 95 45 30 psi 85 90 95 90 60 psi 85 90 95 180 100 psi 95 100 105 250 1 Table 3. Gage/Differential Output FS Pressure XPC/XPCL at 12 Vdc, 25 C 77 F XPXL at 5 Vdc, 25 C 77 F Overpressure Output Full Scale Span (mV) Output Full Scale Span (mV) (psi) Min. Typ. Max. Min. Typ. Max. Max. 4 inH O 23 25 27 50 68 86 3 2 10 inH O 19 20 21 45 78.5 112 3 2 1 psi 17 18 19 40 75 110 3 5 psi 57 60 63 112 168.5 225 15 15 psi 85 90 95 168 253 338 45 30 psi 85 90 95 168 253 338 90 60 psi 85 90 95 189 263.5 338 180 100 psi 95 100 105 210 295 380 250 150 psi 85 90 95 187 262.5 338 250 Note: 1. Differential common mode pressure should not exceed 50 psi. Figure 1. Mounting Dimensions (For reference only: mm (in).) D/A Housing GFS/AFS Housing GBFS Housing (Differential/Absolute) (Gage/Absolute Offset Axial) (Gage Backside Offset Axial) 2 www.honeywell.com/sensing