Data Sheet SENCITY Rail PTC Antenna 1302.99.0026 Description Railway rooftop antenna for Positive train control (220 MHz). Embedded GNSS antenna with integrated LNA. Supports GPS L1, Galileo E1, BeiDou B1 and GLONASS G1. Rugged design, meets EN 50155 Railway Standard. Fire retardant according to EN 45545-2 and NFPA-130. Dedicated grounding contact (optional). Cable conduit support (optional). Product Configuration Technical Data Electrical Data Band 1 Band 2 Band Name PTC GNSS Frequency (MHz) 219.98 - 220.02 1559 - 1620 VSWR 1.5 1.8 Impedance (Ohm) 50 50 Gain (dBi) 1.72 Composite power max (W) 80 Ambient temperature (C) 25 Ports Port 1 Port 2 Port name PTC GNSS Connector N, jack (female) TNC, plug (male) Polarization vertical circular right DC grounded Yes No Connections Band 1 Band 2 Port 1 X Port 2 X General Data Indicated VSWR values are valid for a metallic ground plane of 2.0 x 2.0m or larger. Indicated gain values will be achieved on a metallic ground plane of 1.0 x 1.0 m or larger. Electrical Data LNA LNA noise figure dB 1.6 LNA current consumption (mA) 20 LNA is connected to Port 2 MTBF (h) 3000000 This Antenna is compliant with the Radio Equipment Directive 2014/53/EU EMC: EN50121-3-2 (2016) ETSI EN 303 413 V.1.1.1 (2017-06) ETSI EN 301 489-1 V2.2.3 (2019-03) ETSI EN 301 489-19 V2.1.1 (2019-04) LNA input voltage range: 3...5V Document: DOC-0000871763 T / PDO N / date of publication: 14.04.2021 18:04:12 / uncontrolled copy Page 1/2Data Sheet SENCITY Rail PTC Antenna 1302.99.0026 Total gain 90 elevation: 30 dBiC Values for LNA power consumption, noise figure and gain are given for a 5V operating voltage and may differ slightly for a lower voltage. Mechanical Data Dimensions (mm) 154 x 100 x 256 (Heigth x Width x Depth) Weight (kg) 1.6 High-voltage-protection: no voltage on RF port, if the catenary line touches antenna (EN 50124-1, 27.5 kVAC/1min). High-current-protection: Designed acc. to UIC 533, DC-grounded antenna element protection against lightning and short circuit with catenary lines (EN50388, EN 50122-1, 40kA/0.125sec) Corrosion: Low corrosion design according to MIL-F-14072(E), 96 hours Salt Spray test. Mounting: Shall be installed in longitudinal position to the wind/driving direction. Suitable for installation on high speed trains with a maximum speed of 500 km/hr. Environmental Data Environmental conditions indoor/outdoor Operation temperature (C) -55 to 85 Storage temperature (C) -55 to 85 Transport temperature (C) -55 to 85 IP rating IP67, IP69 Flammability rating EN 45545-2 R24 HL3 Solar radiation UL 746C, F1 2011/65/EU (RoHS - including compliant acc. Annex III 2015/863 and 2017/2102) Lead-free soldered yes WEEE 2012/19/EU no special marking needed ELV 2000/53/EC compliant REACH 1907/2006/EC compliant Environmental tests: EN 50155:2018-05 Flammability rating: EN45545-2:2013 + A1:2015, NFPA-130:2017 Tested according to ISO 4589-2:2017, NFX 70-100-1:2006, ISO 5659-2:2011. Material Data Radome colour RAL 7043 (dark grey) Radome material PC (Polycarbonate) Back plate/base plate colour grey Back plate/base plate material Aluminium Plating Passivated (Plating) Related Products 9091.99.0235 Sencity Rail antenna grounding kit 9091.99.0236 Sencity Rail antenna conduit support Kit 9091.99.0261 Sencity Rail antenna mounting plate 9091.99.0252 Sencity Rail antenna adaptor plate Related Documents Mounting instruction DOC-0000295392 Painting instruction DOC-0000256180 Security instruction DOC-0000278984 Outline drawing DOU-00399698 Outline drawing 2 DOU-00154160 3D-model DOC-0000890925 CE compliancy DOC-0000896952 Additional Information HUBER+SUHNER is certified according to ISO 9001, ISO 14001, AS/EN9100, ISO/TS 16949 and IRIS. www.hubersuhner.com Waiver: Fact and figures herein are for information only and do not represent any warranty of any kind. Document: DOC-0000871763 T / PDO N / date of publication: 14.04.2021 18:04:12 / uncontrolled copy Page 2/2