Data Sheet SENCITY Spot-S 2x2 WiFi MIMO Antenna 1324.19.0056 Description Small directional, planar, linear polarized WiFi antenna with 8 dBi gain Dual-slant +/- 45 for 2x2 WiFi MIMO antenna configuration WLAN IEEE 802.11 b/g/n WiFi band 2.4 - 2.485 GHz Rugged design, meets EN 50155 railway and EN 60068 industrial standards Fire retardant acc. to EN 45545-2 and NFPA130 For outdoor and indoor applications Ingress protection IP 66 and IP 67 Wall mounting material included Product Configuration Technical Data Electrical Data Band 1 Frequency (MHz) 2400 - 2485 VSWR 1.5 Impedance (Ohm) 50 Gain (dBi) 8 3dB beamwidth (h) () 75 3dB beamwidth (v) () 70 Composite power max (W) 50 Ambient temperature (C) 25 Front to back ratio (dB) 14 Vertical electrical tilt () 0 Port Isolation (dB) 25 Band 6 Impedance (Ohm) 50 Ports Port 1 Port 2 Connector SMA, jack (female) SMA, jack (female) Polarization -45 slant +45 slant Connections Band 1 Port 1 X Port 2 X General Data Mechanical Data Dimensions (mm) 101 x 81 x 36 (Heigth x Width x Depth) Weight (kg) 0.11 Windload frontal: 15 N at 160 km/h , Wind speed survival: 220 km/h Included mounting material Wall mounting material Environmental Data Environmental conditions indoor/outdoor Operation temperature (C) -40 to 85 Storage temperature (C) -40 to 85 Document: DOC-0000333821 AQ / PDO AK / date of publication: 14.04.2021 17:48:28 / uncontrolled copy Page 1/2Data Sheet SENCITY Spot-S 2x2 WiFi MIMO Antenna 1324.19.0056 Transport temperature (C) -40 to 85 2011/65/EU (RoHS - including compliant 2015/863 and 2017/2102) Lead-free soldered yes WEEE 2012/19/EU special marking needed REACH 1907/2006/EC compliant FLAMMABILITY: EN 45545-2 (2013) HL3 and NFPA130 (2013), also BS 6853 and DIN 5510-2 ENVIRONMENT: Meets EN 50155 (2016) and EN 60068 related tests IP RATING: IP 66 / IP 67 (IEC 60529) SOLAR RADIATION: EN 50125-3:2004 4.9, 1120 W/m for 20h AIR PRESSURE: EN 50125-3:2004 4.2, Altitude Class A1 (up to 1400m) AIR PULE PRESSURE: EN 50125-3:2004 4.2, 1 kPa/s RAIN: EN 50125-3:2004 4.6, delivery rate: 6 mm/min VIBRATION / SHOCK: EN 50125-3:2004 4.13, position profile:outside the trac POLLUTION: EN 50125-3:2004 4.11, pollution levels: 4B1, 4S1 CORROSION: MIL-F-14072 E Type 1expose MECHANICAL IMPACT (HAMMER IMPACT): EN 60068-2-75 (IEC 62262/2002-02 IK06) Material Data Radome colour RAL 7044 (grey) Radome material PC (Polycarbonate) Related Products 9091.99.0238 Outdoor Spot-S Antenna Down-Sidetilt Bracket 9091.99.0237 L-Bracket for SPOT-S antennas Related Documents Mounting instruction DOC-0000287053 Painting instruction DOC-0000256180 Security instruction DOC-0000278984 Outline drawing DOU-00133254 3D-model DOC-0000709389 Additional Information Following Declaration of Conformity for SENCITY Spot-S antennas are available on request: * Industrial standards EN 60068 / EN 60529 / IEC 61373: Ref. DOC-0000318049 * Railway rolling stock, environmental standards EN 50155 and fire behaviour EN 45545-2k, NFPA130: Ref. DOC-0000380375 HUBER+SUHNER is certified according to ISO 9001, ISO 14001, AS/EN9100, ISO/TS 16949 and IRIS. www.hubersuhner.com Waiver: Fact and figures herein are for information only and do not represent any warranty of any kind. Document: DOC-0000333821 AQ / PDO AK / date of publication: 14.04.2021 17:48:28 / uncontrolled copy Page 2/2