Data Sheet EMP Protector 3403.17.0045 Description Fine protector hybrid technology Benefits Broad-band design DC continuity for remote powering Replaceable GDT 9071.99.0548, (90 V) included Compliant to IEC 61643-21 Product Configuration Main path connectors Port 1: unprotected, N jack (female) - Port 2: protected, N jack (female) Mounting and grounding MH119 (bulkhead mounting), M4 (screw), brk (bracket) Side of bulkhead protected side Technical Data Electrical Data Impedance 50 Frequency range 800 - 2000 MHz 1500 - 1600 MHz Return loss 20 dB 26.44 dB Insertion loss 0.4 dB 0.4 dB RF CW power 50 W 50 W PIM 3rd order not specified not specified DC supply voltage 15 V DC current 3 A Surge current handling capability 30 single / 20 multiple kA (test pulse 8/20 s) Residual pulse energy 6 J typically (test pulse 4 kV 1.2/50 s / 2 kA 8/20 s) main path - protected side Mechanical Data Number of matings 500 Weight 330 g Environmental Data Operating temperature -40 C to +85 C Waterproof degree IP66 (according to IEC 60529, data refer to the coupled state) 2011/65/EU (RoHS - including compliant acc. Annex III 2015/863 and 2017/2102) Material Data Piece Parts Material Surface Plating Housing Aluminium Chromatized Port 1 center contact Copper Beryllium Alloy Gold Plating (without Nickel underplating) Port 2 center contact Copper Beryllium Alloy Gold Plating (without Nickel underplating) Related Documents Outline drawing DOU-00015730.1 Mounting instruction DOC-0000176104 Remarks Current-handling capability: 25 kA once and 10 kA multiple (8 / 20 us test pulse) Residual pulse energy: typ. 6uJ (test pulse 4 kV, 1.2 / 50 us 2 kA, 8 / 20 us IEC 61000-4-5) Residual pulse amplitude: typ. <60V (measured with gas capsule 73 Z-0-0-548 (90 V)) Gas capsule 73Z-0-0-548 included (sparkover voltage 90 V) Max. bypass voltage: 15 V Max. bypass current: 3A DC bypass resistance: < 1 Ohm Bulkhead on the protected side. Document: DOC-0000177133 AA / PDO H / date of publication: 16.11.2020 18:22:29 / uncontrolled copy Page 1/2Data Sheet EMP Protector 3403.17.0045 Recommendation: if this protector is mated with connectors made of copper-alloy base material and trimetal or nickel plating the connector area must be taped to improve long-term durability. HUBER+SUHNER is certified according to ISO 9001, ISO 14001, AS/EN9100, ISO/TS 16949 and IRIS. www.hubersuhner.com Waiver: Fact and figures herein are for information only and do not represent any warranty of any kind. Document: DOC-0000177133 AA / PDO H / date of publication: 16.11.2020 18:22:29 / uncontrolled copy Page 2/2