Data Sheet Formable microwave cable SR 86 75 TP Item: 22810164 Description Semi-rigid: Semi-rigid, formable microwave cables 75 Ohm, 63 GHz, 140C, 2.2 mm, no jacket Technical Data Construction Material Detail Diameter Centre conductor Steel, Copper+Silver plated Wire 0.29 mm Dielectric PTFE (Polytetrafluoroethylene) 1.73 mm Outer conductor Copper, Tin plated Tube, 100% 2.2 mm Electrical Data Impedance 75 +/- 2 Operating Frequency 63 GHz Velocity of signal propagation 69.5 % Screening effectiveness 120 dB (up to 18 GHz) Operating voltage 1.2 kV (at sea level) rms Test voltage 2.5 kVrms (50 Hz/1 min) Mechanical Data Weight 0.27 kg/100 m Min. bending radius static 3.18 mm Environmental Data Temperature range -55 C ... +140 C Halogen free No 2011/65/EU (RoHS - including compliant 2015/863 and 2017/2102) 1907/2006/EC (REACH) compliant 2000/53/EC (ELV) compliant 2012/19/EU (WEEE) no special marking needed Additional Information Remarks (For details refer to the HUBER+SUHNER RF CABLES GENERAL CATALOGUE or contact your nearest HUBER+SUHNER partner) Suitable Connectors Cable group Y4 2 mm / 75 Ohm Document: DOC-0000177982 AP / PDO A / date of publication: 02.12.2020 19:31:48 / uncontrolled copy Page 1/2Data Sheet Formable microwave cable SR 86 75 TP Item: 22810164 Matrix typical Attenuation formula: (a*f 0.5 + b*f) and maximum Power CW formula: (p/f 0.5) Coefficients: a = b = f = 63 P at 1GHz = max Frequency Nom. attenuation Nom. attenuation Max. CW power (GHz) (dB / m) (dB / ft) (W) sea level 25 C sea level 25 C sea level 40 C ambient ambient ambient temperature temperature temperature 3.15 6.3 9.45 12.6 15.75 18.9 22.05 25.2 28.35 31.5 34.65 37.8 40.95 44.1 47.25 50.4 53.55 56.7 59.85 63.0 HUBER+SUHNER is certified according to ISO 9001, ISO 14001, AS/EN9100, ISO/TS 16949 and IRIS. www.hubersuhner.com Waiver: Fact and figures herein are for information only and do not represent any warranty of any kind. Document: DOC-0000177982 AP / PDO A / date of publication: 02.12.2020 19:31:48 / uncontrolled copy Page 2/2