MicroSmart FC6A PLC Digital I/O Specicfi ations KEY FEATURES 16 modules to choose from Screw or MIL type terminal block 8/16/32 points I/O module SPECIFICATIONS Input Module Specifications Part Number FC6A-N08B1 FC6A-N16B1 FC6A-N16B3 FC6A-N32B3 FC6A-N08A11 Input Points 8 (8/1 common) 16 (16/1 common) 32 (16/1 common) 8 (4/1 common) Rated Input Voltage 24V DC sink/source input signal 100 to 120V AC Input Voltage Range 0 to 28.8V DC 0 to 132V AC (50/60 Hz) Rated Input Current 7 mA/point (24V DC) 5 mA/point (24V DC) 17 mA/point (120V AC, 60 Hz) Input Impedance 3.4 k 4.4 k 0.8 k (60 Hz) OFF Voltage 5V maximum 20V maximum ON Voltage 15V minimum 79V minimum OFF Current 1.2 mA maximum 0.9 mA maximum ON Current 4.2 mA minimum (at 15V DC) 3.2 mA minimum (at 15V DC) Input Delay Time (24V DC) Turn ON: 4.1ms, Turn OFF: 4.1ms Turn ON: 25ms, Turn OFF: 30ms Between input terminals in the same common: Not isolated Between input terminals: Not isolated Isolation Between input terminals in different commons: Isolated Internal circuit: Photocoupler-isolated Between input terminals and internal circuits: Photocoupler-isolated External Load for Not needed I/O Interconnection Signal Determination Method Static Effect of Improper Input Both sink and source input signals can be connected. If any input exceeding the rated value is If any input exceeding the rated value is applied, permanent damage Connection applied, permanent damage may be caused. may be caused. Cable Length 3m in compliance with electromagnetic immunity Connector Insertion/ 100 times minimum Removal Durability 1-wire: AI 0.5-8 WH (Phoenix Contact) Applicable Ferrule 2-wire: AI-TWIN 20.5-10 (Phoenix Contact) 30mA (5V DC) 40mA (5V DC) 40mA (5V DC) 65mA (5V DC) 40mA (5V DC) All Inputs ON 0mA (24V DC) 0mA (24V DC) 0mA (24V DC) 0mA (24V DC) 0mA (24V DC) Internal Current Draw 17mA (5V DC) 17mA (5V DC) 17mA (5V DC) 17mA (5V DC) 17mA (5V DC) All Inputs OFF 0mA (24V DC) 0mA (24V DC) 0mA (24V DC) 0mA (24V DC) 0mA (24V DC) Internal Power Consumption 0.20W 0.27W 0.27W 0.44W 0.27W (at 24V DC while all inputs ON) Weight (approx.) 110g 105g 75g 110g 110g 1Relay Output Module Specifications Transistor Output Module Specifications Part Number FC6A-R081 FC6A-R161 FC6A-T08K1 FC6A-T16K1 FC6A-T16K3 FC6A-T32K3 Part Number FC6A-T08P1 FC6A-T16P1 FC6A-T16P3 FC6A-T32P3 Output Points 8 (4/1 common) 16 (8/1 common) Output Type 1NO Output Points 8 (8/1 common) 16 (16/1 common) 32 (16/1 common) 2A per point Maximum Load FC6A-T K : Transistor sink output Output Type Current FC6A-T P : Transistor source output 7A per common 8A per common Minimum Switching Rated Load Voltage 24V DC 1 mA/ 5V DC (reference value) Load Operating Load Voltage Range 19.2 to 28.8V DC Initial Contact 30 m maximum 0.5A per point 0.1A per point Resistance Maximum Load Current 3A per common 1A per common 100,000 operations minimum Electrical Life Voltage Drop (ON Voltage) (rated load 1,800 operations/hour) 1V maximum (voltage between COM and output terminals when output is on) Inrush Current 20,000,000 operations minimum 1A maximum Mechanical Life (no load 18,000 operations/hour) Leakage Current 0.1mA maximum Resistive load: 240V AC 2A, 30V DC 2A Clamping Voltage Approx. 50V Rated Load Inductive load: 240V AC 2A (cos = 0.4) Maximum Lamp Load 12W 2.4W 30V DC 2A (L/R =7 ms) Inductive Load L/R = 10ms (28.8V DC 1Hz) Between output and ground terminals: 1,500V AC, 1 minute FC6A-T K : 100 mA maximum, 24V DC (power voltage at the +V terminal) External Current Draw Between output terminal and internal circuit: FC6A-T P : 100 mA maximum, 24V DC (power voltage at the -V terminal) Dielectric Strength 1,500V AC, 1 minute Transistor Sink Output: No Between output terminals (COMs): 1,500V AC, 1 Overcurrent Protection Transistor Source Output: Yes minute Between output terminal and internal circuit: Photocoupler-isolated Connector Insertion/ Isolation 100 times minimum Between output terminals: Not isolated Removal Durability Connector Insertion/ Removal Durability 100 times minimum Applicable 1-wire: AI 0.5-10 (Phoenix Contact) Ferrule 2-wire: AI-TWIN 20.5-10 (Phoenix Contact) Applicable Ferrule 1-wire: AI 0.5-10 (Phoenix Contact) 2-wire: AI-TWIN 20.5-10 (Phoenix Contact) All 25mA (5V DC) 30mA (5V DC) 45mA (5V DC) 35mA (5V DC) 50mA (5V DC) All outputs ON outputs Internal 15mA (24V DC) 25mA (24V DC) 50mA (24V DC) Internal 50mA (24V DC) 100mA (24V DC) ON Current Current 17mA (5V DC) 17mA (5V DC) 17mA (5V DC) 17mA (5V DC) Draw All All outputs OFF Draw 17mA (5V DC) 17mA (5V DC) 0mA (24V DC) 0mA (24V DC) 0mA (24V DC) 0mA (24V DC) outputs 0mA (24V DC) 0mA (24V DC) Internal Power Consumption OFF 0.53W 0.80W 1.50W (at 24V DC while all outputs ON) Internal Power Consumption Turn ON Time 400 s maximum Output 1.44W 2.74W (at 24V DC while all Delay Turn OFF Time 450 s maximum outputs ON) Weight (approx) 110g 105g 75g 115g Weight (approx.) 130g 140g Mixed I/O Module Specifications Part Number FC6A-M08BR1 FC6A-M24BR1 Input Points 4 (4/1 common) 16 (16/1 common) Rated Input Voltage 24V DC sink/source input signal Input Voltage Range 0 to 28.8V DC Rated Input Current 7 mA/point (24V DC) Input Impedance 3.4 k OFF Voltage 5V maximum ON Voltage 15V minimum fi OFF Current 1.2 mA maximum ON Current 4.2 mA minimum (at 15V DC) Input Delay Time (24V DC) Turn ON Time: 4.1ms, Turn OFF Time: 4.1ms Isolation Between input terminals: Not isolated Internal circuit: Photocoupler-isolated External Load for I/O Interconnection Not needed Signal Determination Method Static Effect of Improper Input Connection Both sinking and sourcing input signals can be connected. If any input exceeding the rated value is applied, permanent damage may be caused. Cable Length 3m in compliance with electromagnetic immunity Output Points 4 (4/1 common) 8 (4/1 common) Output Type 1NO 2A per point Maximum Load Current 7A per common Minimum Switching Load 1 mA/ 5V DC (reference value) Initial Contact Resistance 30 m maximum Electrical Life 100,000 operations minimum (rated load 1,800 operations/hour) Mechanical Life 20,000,000 operations minimum (no load 18,000 operations/hour) Resistive load: 240V AC 2A, 30V DC 2A fi Rated Load Inductive load: 240V AC 2A (cos = 0.4), 30V DC 2A (L/R =7 ms) Between output and PE terminals: 1,500V AC, 1 minute Dielectric Strength Between output terminal and internal circuit: 1,500V AC, 1 minute Between output terminals (COMs): 1,500V AC, 1 minute Connector Insertion/Removal Durability 100 times minimum Applicable Ferrule 1-wire: AI 0.5-10 (Phoenix Contact), 2-wire: AI-TWIN 20.5-10 (Phoenix Contact) All I/Os ON 30mA (5V DC), 25mA (24V DC) 55mA (5V DC), 25mA (24V DC) Internal Current Draw All I/Os OFF 17mA (5V DC), 0mA (24V DC) 17mA (5V DC), 0mA (24V DC) Internal Power Consumption 0.80W 0.97W (at 24V DC while all I/Os are ON) Weight (approx.) 120g 165g 2 Output Specications Input Specication