FT1A Series - Touch Key Features 3.8 (3.7 monochrome) HMI with embedded 12 I/O PLC Available in Monochrome or 65K TFT color 2 2 740 cd/m monochrome, 400 cd/m color 8 inputs, 4 relay outputs Embedded 2pt 0-10V analog input 10 Amp Relay contacts Embedded Ethernet port USB Mini-B Programming Port USB Type A port for data logging and recipe functions RS232C/RS485 interface IP66f (water and oiltight) General Specifications Part Numbers FT1A-C12RA-W FT1A-C12RA-B FT1A-C12RA-S FT1A-M12RA-W FT1A-M12RA-B FT1A-M12RA-S Appearance LCD Screen TFT Color STN Monochrome Bezel Color Light Gray Dark Gray Silver Light Gray Dark Gray Silver Operating Temperature 0 to +50C Storage Temperature 20 to +60C (no freezing) Rated Power Voltage 24V DC Allowable Voltage Range 20.4 to 28.8V DC (including ripple) Maximum Power Consumption 9.2W maximum (when USB2 is not used: 5.8W max.) Weight Approx. 300g Display Specifications Part Number FT1A-C12RA-* FT1A-M12RA-* Display Element TFT color LCD STN monochrome LCD Colors/Shades 65,536 colors Monochrome 8 shades Effective Display Area 88.92 W x 37.05 H mm 87.59 W x 35.49 H mm Display Resolution 240 W x 100 H pixels View Angle Left/right 40, top 20, bottom 60 Left/right/top/bottom: 45 Contrast Adjustment Not possible 32 levels Backlight LED LED (white, red, pink) Note 1 Backlight Life 50,000 hours Note 2 2 2 Brightness 400 cd/m 740 cd/m Brightness Adjustment 32 levels Backlight Control Auto off function Backlight Replacement Not possible Graphics Line, polyline, polygon, rectangle, circle, ellipse, arc, pie, equilateral polygons (3, 4, 5, 6, 8), fill, picture Window Display 3 popup screens + 1 system screen 1. The backlight life refers to the time until the brightness reduces by half after use at 25C. 2. Brightness of LCD only (monochrome LCD: when lit white). Specifications cont on next page New Generation PLCFunction Specifications Part Numbers FT1A-C12RA-*, M12RA-* Program Capacity Program size: 48 KB, Configuration memory capacity: 5 MB Points 8 Input Output Points 4 User Program Storage Flash ROM (100,000 times) Backup data: Internal relay, shift register, counter current value, RAM Note 1 data register , clock data (year, month, and day) Backup Data 128KB Buzzer Output Single tone (tone length is adjustable) Backup Duration Approx. 30 days (typical) at 25C after backup battery fully charge Backup Function Battery Lithium Charging Time Approx. 15 hours for charging from 0% to 90% of full charge Battery Life 5 years Replaceability Not possible Note 2 Clock Function Clock accuracy: 30 sec/month (typical) at 25C Control System Stored program system Basic Instructions 42 Instruction Words Advanced Instructions 97 Basic Instruction 1850s/1000 steps Processing Time END Processing 5 msec minimum Internal Relay 1024 Shift Register 128 Data Register 2000 Counter (adding, reversible) 200 Timer (1-sec, 100ms,10ms, 1ms) 200 Input Filter Without filter, 3 to 15ms (selectable in increments of 1ms) Catch Input/Interrupt Input Input Points 4 Keep data, Power failure, Clock error, Watchdog timer, Timer/counter preset value change error, Self-diagnostic Function User program syntax, User program execution, System error, Memory cartridge transfer error Points Single/two-phase selectable: 1 (5 kHz, multiple 2/4, single-phase cannot be used) Maximum Counter Frequency Single-phase: 4 (x 10 kHz) High-speed Counter Counting Range 0 to 4,294,967,295 (32 bits) Operation Mode Rotary encoder mode and adding counter mode Points (Terminal No.) 2 Analog Voltage Input Input voltage Range 0 to 10V DC Digital Resolution 10-bit( 0 to 1000) USB Standard USB 2.0 USB Port Connector Mini-B type Ethernet Port 1 1. Among data registers D0 to D1999, only D0 to D999 are backed up. 2. Set the calendar/clock using the clock function in WindLDR. Dimensions on next page