PS3L Series
Power Supplies
PS3L S eries
Metal Frame Switching Power Supplies
Key features of the PS3L series include:
Metal frame
Wide power range: 10W-300W
Universal input:
10W-30W: 85-264V AC/105-370V DC
50W-300W: 85-264V AC/105-350V DC
Screw terminals, IP20 ( ngersafe)
Power Factor Protection
EN61000-3-2
EN61000-3-3 (50W to 300W models)
Overcurrent/overvoltage protection
Voltage +10% adjustment
DIN rail or panel surface mount
Approvals:
UL508 Listed
CE marked
File #E177168
UL508 listed
EN50178 compliant
EMC Directives
EN50081-2
EN61000-6-2
LVD EN60950:2000
Rated Rated Part Rated Rated Part
Item Watts Item Watts
Voltage Current Number Voltage Current Number
5V DC 2A PS3L-A05AFF
12V DC 8.5A PS3L-E12AFF
12V DC 0.9A PS3L-A12AFF
10
100
24V DC 0.5A PS3L-A24AFF
24V DC 4.5A PS3L-E24AFF
5V DC 3A PS3L-B05AFF
12V DC 13A PS3L-F12AFF
15 12V DC 1.4A PS3L-B12AFF
24V DC 0.7A PS3L-B24AFF
150
24V DC 6.5A PS3L-F24AFF
5V DC 6A PS3L-C05AFF
12V DC 2.5A PS3L-C12AFF
30
24V DC 1.3A PS3L-C24AFF
300 24V DC 12.5A PS3L-G24AFF
12V DC 4.3A PS3L-D12AFF
50
24V DC 2.2A PS3L-D24AFF
118 www.idec.com
Communication & Networking
Sensors Power Supplies Automation Software Operator Interfaces PLCsCommunication & Networking
PLCs Operator Interfaces Automation Software Power Supplies Sensors
PS3L Series
Power Supplies
Speci cations
PS3L-A PS3L-B PS3L-C PS3L-D PS3L-E PS3L-F PS3L-G24
Type
(10W) (15W) (30W) (50W) (100W) (150W) (300W)
Input Voltage 100 to 240V AC 100 to 240V AC
(Single-phase two-wire) (Voltage range: 85 to 264V AC/105 to 370V DC) (Voltage range: 85 to 264V AC/105 to 350V DC)
Frequency (AC input only) 47 to 63Hz
100V 0.25A 0.37A 0.68A 0.68A 1.4A 2.0A 3.8A
Input Current
(Typical)
200V 0.16A 0.23A 0.45A 0.34A 0.65A 0.95A 2.0A
100V 20A max. 20A max. 20A max. 30A max. 30A max. 30A max. 30A max.
Inrush Current
(Cold start)
200V 40A max. 40A max. 40A max. 60A max. 60A max. 60A max. 60A max.
Leakage Current 0.75 mA max. (60Hz; UL, CSA, VDE)
Power Factor (Typical) 0.99 (100V AC input, rated output), 0.95 (200V AC, rated output)
5V DC: 70% 5V DC: 73% 5V DC: 75%
Ef ciency (Typical) 12V DC: 74% 12V DC: 75% 12V DC: 77% 12V DC: 76% 12V DC: 78% 12V DC: 80%
24V DC: 78% 24V DC: 78% 24V DC: 79% 24V DC: 79% 24V DC: 81% 24V DC: 83% 24V DC: 81%
5V/2A 5V/3A 5V/6A
Rated Voltage/Current 12V/0.9A 12V/1.4A 12V/2.5A 12V/4.3A 12V/8.5A 12V/13A
24V/0.5A 24V/0.7A 24V/1.3A 24V/2.2A 24V/4.5A 24V/6.5A 24V/12.5A
Adjustable Voltage Range 10% (V.ADJ control on front)
Output Holding Time 20msec minimum (at the rated input and output)
Start Time 200msec maximum (at the rated input and output) 500msec maximum (at the rated input and output)
Rise Time 100msec maximum (at the rated input and output) 200msec maximum (at the rated input and output)
Input Fluctuation 5V: 20mV maximum, 12V: 48mV maximum, 24V: 96mV maximum
Load Fluctuation 5V: 40mV maximum, 12V: 100mV maximum, 24V: 150mV maximum
5V 50mV maximum 5V: 60mV maximum
Temperature Change
12V: 120mV maximum 12V: 150mV maximum
(10 to +50C)
24V: 240mV maximum 24V: 290mV maximum
1 1
10 to 0C 5V: 160mV maximum, 12V/24V: 180mV maximum 200 mV maximum
Ripple
Voltage 1
0 to +50C 5V: 120mV maximum, 12V/24V: 150mV maximum
2
Overcurrent Protection 105% (Typical), Automatic reset
3 4
Overvoltage Protection 120% min. Output off at 120%, reset when input voltage is restored.
Operation Indicator LED (green)
Between input and output terminals: 3,000V AC, 1 minute
Dielectric Strength Between input terminal and housing: 2,000V AC, 1 minute
Between output terminal and housing: 500V AC, 1 minute
Between input and output terminals: 100MW minimum (500V DC megger)
Insulation Resistance
Between input terminal and housing: 100MW minimum (500V DC megger)
5
Operating Temperature 10 to +70C 10 to +60C 10 to +65C
Storage Temperature 30 to +75C
Operating Humidity 20 to 90% RH (no condensation, no freezing)
2
Vibration Resistance 10 to 55Hz, 20m/s constant, sweep cycle 1 minute, 2 hours each in 3 axes
2
Shock Resistance 200m/s , 11ms, 1 shock each in 3 axes
Dimensions H X W X D (mm) 97 x 35 x 86 97 x 35 x 86 96 x 35 x 114.5 97 x 37 x 147.5 97 x 54 x 200 97 x 62 x 200 158 x 63 x 230
Weight (Approx.) 240g 250g 340g 350g 630g 730g 1550g
Terminal Screw M4 slotted-Phillips head screw (screw terminal type)
1. Including noise. Measured at the terminal block according to EIAJ.
2. Protection against short-circuit and overcurrent of 30 seconds maximum. Overload for 30 seconds or longer
may damage the internal elements.
3. Zener limiter method
4. Turn the input off and after one minute, turn the input on again.
5. Refer to the derating characteristics. No freezing. The maximum temperature is the temperature at 100%
output current (natural air-cooling) in the derating characteristics.
USA: 800-262-IDEC Canada: 888-317-IDEC
119
Supplementary
Output Input
Functions
Regulation