Preliminary Datasheet Revision 0.6 3GBit/s Digital INAP375R Automotive Pixel Link INAP375RAQ Receiver Features: The INAP375R together with an APIX2 transmitter offers Backwards compatibility with APIX1 the next generation high speed digital serial link for 500 MBit/s, 1 GBit/s and 3 GBit/s sustained DISPLAY and CAMERA applications. It provides a downstream link bandwidth for video data DC-balanced, AC coupled low latency, point-to-point link rates up to 2591 MBit/s over shielded twisted pair (STP) cables. Its scalable up to 187.5 MBit/s upstream link bandwidth physical layer provides bandwidth of up to 3 GBit/s at Supports 2 independent video streams lowest EMI. The INAP375R supports popular automotive Configurable video interface displays with video resolutions such as 1600x600 pixels Parallel RGB (10,12,18 or 24 Bit) and refresh rates of up to 100Hz. The device offers a 1 openLDI compliant LVDS interface flexible video interface, configurable to handle 1 or 2 Single Pixel Format (18 or 24 Bit) independent video streams, with output interfaces such as Dual Pixel Format (18 or 24 Bit) parallel RGB (1x24 Bit or 2x10 Bit) or openLDI (LVDS) Parallel Bulk Data Mode (10,12,18,24 Bit) e.g. 2x (4 lanes + clock). Software adjustable driver Video resolutions up to HD resolutions characteristics at the transmitter, combined with the powerful adaptive equalizer and configurable operating Configurable full duplex communication modes allow the transmission of 3 GBit/s at distances of up channel to 12m over a single pair of wires. In addition to the video Daisy chain output to a 2nd receiver transmission the INAP375R provides completely indepen- Media Independent Interface dent Full Duplex Communication channels. Using the SPI data interfaces internal AShell protocol, data transfers are protected by IC Master interface error detection and retransmission mechanisms. Offering GPIOs for direct signalling and camera a Media Independent Interface (MII), the INAP375R can be synchronization support directly connected to an ethernet Media Access Controller, Embedded AShell offering full network capabilities through the APIX link. IS Audio interface Additionally, the link is optimized to carry low latency GPIO supports 16/24/32 Bit word length signals for reset or synchronization purposes. The inbuilt supports up to 192kHz sampling audio path allows synchronous transmission of up to 4 TDM support for up to 8 channels stereo audio channels, with highly precise clock regenera- Diagnostic Features: tion at the receiver for high-end rear-seat entertainment Built-In PRBS Checker applications. Embedded diagnostics Applications: Up to 12m distance at 3 GBit/s Central Information Displays Package: Round View Camera Systems 100 pin LQFP Head up Displays 104 ball AQFN Cluster Displays Rear-Seat Entertainment Systems Temperature/Quality: Stereo Camera Systems -40C to +105C Rear View Camera Systems AEC-Q100 Sensor Fusion Systems Automotive Driver Assistance Surveillance Systems Inspection Systems DS INAP375R Revision 0.6 Inova Semiconductors Confidential Page 1 of 38Preliminary Datasheet 1.0 Characteristics Integrity support FIFO Algo 2xLVDS 2x parallel Pixel clock synth. Video CDR video AGC Deframer Input CML FIFO DFE Deserializer Pixel clock synth. APIX Downstream Audio Audio I2S Output clock synth CML GPIOs GPIO Framer I2C Dev. I2C Output CML I2C M Serializer EEPROM APIX AShell MII / Upstream Nibble Ethernet Data Deframer Input CML Deserializer SPI M EEPROM Configuration, Data VCO Osc. Reset SPI S Control, Status Configuration 10MHz Reset Figure 1-1: INAP375R Block Diagramm All values in this section are preliminary results from product characterization. Final values will be available after product qualification. DS INAP375R Revision 0.6 Inova Semiconductors Confidential Page 2 of 38 Phase alignment Mux Mux