IS25LQ032B
IS25LQ016B
IS25LQ080B
32/16/8Mb
3V QUAD SERIAL FLASH MEMORY WITH
MULTI-I/O SPI
DATA SHEET
IS25LQ032B/016B/080B
32/16/8Mb
3V QUAD SERIAL FLASH MEMORY MULTI-I/O SPI
FEATURES
Industry Standard Serial Interface Low Power with Wide Temp. Ranges
- Single 2.3V to 3.6V Voltage Supply
- IS25LQ032B: 32Mbit/4Mbyte
- 10 mA Active Read Current
- IS25LQ016B: 16Mbit/2Mbyte
- 8 A Standby Current
- IS25LQ080B: 8Mbit/1Mbyte
- 5 A Deep Power Down
- 256-bytes per Programmable Page Standard
- Temp Grades:
- Standard SPI/Dual/Quad Multi-I/O SPI
Extended: -40C to +105C
- Supports Serial Flash Discoverable Parameters
Auto Grade A3: -40C to +125C
(SFDP)
Note: Extended+ should not be used for Automotive.
High Performance Serial Flash (SPI)
- 104 MHz SPI/Dual/Quad Multi-I/O SPI
Advanced Security Protection
- 416 MHz equivalent Quad SPI
- Software and Hardware Write Protection
- 52MB/S Continuous Data Throughput
- 4x256-Byte dedicated security area with
- Supports SPI Modes 0 and 3
OTP user-lockable bits.
- More than 100,000 erase/program cycles
- 128 bit Unique ID for each device (Call Factory)
- More than 20-year data retention
1
Industry Standard Pin-out & Pb-Free Packages
Efficient Read and Program modes
- M = 16-pin SOIC 300mil
- Low Instruction Overhead Operations
- B = 8-pin SOIC 208mil
- Continuous data read with Byte Wrap around
- N = 8-pin SOIC 150mil
- Allows XIP operations (execute in place)
- F = 8-pin VSOP 208mil
- Outperforms X16 Parallel Flash
- K = 8-contact WSON 6x5mm
- L = 8-contact WSON 8x6mm
Flexible & Cost Efficient Memory Architecture
- T = 8-contact USON 4x3mm
- Uniform 4 Kbyte Sectors or 32/64 Kbyte Blocks
- G = 24-ball TFBGA 6x8mm 4x6 (Call Factory)
- Flexible 4, 32, 64 Kbytes, or Chip Erase
- H = 24-ball TFBGA 6x8mm 5x5 (Call Factory)
- Standard Page Program 1 to 256 bytes
- KGD (Call Factory)
- Program/Erase Suspend and Resume
Note1: IS25LQ080B (not available in M, L, G, H)
Integrated Silicon Solution, Inc.- www.issi.com
2
Rev. H5
09/03/2019