IS25WP016D-JKLE ISSI

IS25LP016D IS25WP016D 16Mb SERIAL FLASH MEMORY WITH 133MHZ MULTI I/O SPI & QUAD I/O QPI DTR INTERFACE DATA SHEET IS25LP016D IS25WP016D 16Mb SERIAL FLASH MEMORY WITH 133MHZ MULTI I/O SPI & Q UAD I/O QPI DTR INTERFACE FEATURES Industry Standard Serial Interface Low Power with Wide Temp. Ranges - IS25LP016D: 16Mbit/2Mbyte - Single Voltage Supply - IS25WP016D: 16Mbit/2Mbyte IS25LP: 2.30V to 3.60V - 256 bytes per Programmable Page IS25WP: 1.65V to 1.95V - 4 mA Active Read Current (typ.) - Supports standard SPI, Fast, Dual, Dual - 5 A Standby Current (typ.) I/O, Quad, Quad I/O, SPI DTR, Dual I/O - 1 A Deep Power Down (typ.) DTR, Quad I/O DTR, and QPI - Temp Grades: - Supports Serial Flash Discoverable Extended: -40C to +105C Parameters (SFDP) Auto Grade (A3): -40C to +125C High Performance Serial Flash (SPI) Advanced Security Protection - 50MHz Normal and 133Mhz Fast Read - Software and Hardware Write Protection - 532 MHz equivalent QPI - Power Supply Lock Protect - DTR (Dual Transfer Rate) up to 66MHz - 4x256-Byte Dedicated Security Area - Selectable Dummy Cycles with OTP User-lockable Bits - Configurable Drive Strength - 128 bit Unique ID for Each Device - Supports SPI Modes 0 and 3 (Call Factory) - More than 100,000 Erase/Program Cycles - More than 20-year Data Retention (1,2) Industry Standard Pin-out & Packages - B = 8-pin SOIC 208mil Flexible & Efficient Memory Architecture - N = 8-pin SOIC 150mil - Chip Erase with Uniform: Sector/Block - V = 8-pin VVSOP 150mil Erase (4/32/64 Kbyte) - K = 8-contact WSON 6x5mm - Program 1 to 256 Bytes per Page - U = 8-contact USON 2x3mm - Program/Erase Suspend & Resume - T = 8-contact USON 4x3mm - M = 16-pin SOIC 300mil (Call Factory) Efficient Read and Program modes - L = 8-contact WSON 8x6mm - Low Instruction Overhead Operations - G= 24-ball TFBGA 6x8mm 4x6(Call - Continuous Read 8/16/32/64-Byte Factory) Burst Wrap - H = 24-ball TFBGA 6x8mm 5x5 (Call - Selectable Burst Length Factory) - QPI for Reduced Instruction Overhead - KGD (Call Factory) - AutoBoot Operation Notes: 1. Call Factory for other package options available. 2. For the dedicated RESET option, see the Ordering Information. Integrated Silicon Solution, Inc.- www.issi.com 2 Rev. B12 09/20/2020