IX4351NETR IXYS

IX4351NE 9A Low Side SiC MOSFET & IGBT Driver INTEGRATED CIRCUITS DIVISION Features Description Separate 9A peak source and sink outputs The IX4351NE is designed specifically to drive SiC Operating Voltage Range: -10V to +25V MOSFETs and high power IGBTs. Separate 9A Internal negative charge pump regulator for source and sink outputs allow for tailored turn-on and selectable negative gate drive bias turn-off timing while minimizing switching losses. An Desaturation detection with soft shutdown sink driver internal negative charge regulator provides a TTL and CMOS compatible input selectable negative gate drive bias for improved dV/dt Under Voltage lockout (UVLO) immunity and faster turn-off. Thermal shutdown Open drain FAULT output Desaturation detection circuitry detects an over current condition of the SiC MOSFET and initiates a Applications soft turn off, thus preventing a potentially damaging Driving SiC MOSFETs and IGBTs dV/dt event. The logic input is TTL and CMOS On-board charger and DC charging station compatible this input does not need to be level shifted Industrial inverters even with a negative gate drive bias voltage. PFC, AC/DC and DC/DC converters Protection features include UVLO and thermal shutdown detection. An open drain FAULT output signals a fault condition to the microcontroller. IX4351 Functional Block Diagram The IX4351NE is rated for operational temperature range of -40C to +125C,and is available in a V DD thermally enhanced 16-pin power SOIC package. 4 DESAT Ordering Information 6 IN 6.8V V 2 DD Part Descript io n V 3 DD 16-Pin power SOIC with exposed thermal pad. Gate and 1 OUTSRC IX4351NE Control In tubes (50/Tube) 5 16 FAULT OUTSNK Logic 16-Pin power SOIC with exposed thermal pad. V 15 SS IX4351NETR 10 V In Tape & Reel (2000/Reel) SS 14 OUTSOFT V DD V SS 4.6V 13 INSOFT V 8 REG Regulator 2.6V V DD Charge SET 9 Pump 12 CAP Control 11 GND 7 COM DS-IX4351NE-R01 www.ixysic.com 1IX4351NE INTEGRATED CIRCUITS DIVISION 1. Specifications 3 1.1 Package Pinout: 16-Pin SOIC Package . 3 1.2 Pin Description: 16-Pin SOIC Package . 3 1.3 Absolute Maximum Ratings (With respect to V unless otherwise specified) . 4 COM 1.4 Recommended Operating Conditions 4 1.5 Electrical Characteristics 4 1.6 Thermal Characteristics . 6 2. Functional Description . 7 2.1 Logic Input (IN) . 7 2.2 Gate Drive Outputs (OUTSRC and OUTSNK) 7 2.3 4.6 Volt Regulator (VREG) . 7 2.4 Negative V Charge Pump Regulator . 8 SS 2.5 Desaturation Detection and Protection . 8 2.6 Thermal Shutdown . 8 2.7 FAULT Output 8 3. Manufacturing Information 9 3.1 Moisture Sensitivity 9 3.2 ESD Sensitivity . 9 3.3 Soldering Profile . 9 3.4 Board Wash 9 3.5 Mechanical Dimensions 10 2 www.ixysic.com R01