th Date: 8 September 2020 Data Sheet Issue: 2 Dual Thyristor Module Types MCC240-60io2 to MCC240-65io2 Absolute Maximum Ratings V RRM VDRM V MCC 6000 240-60io2 240-65io2 6500 MAXIMUM VOLTAGE RATINGS UNITS LIMITS 1) V Repetitive peak off-state voltage 6000-6500 V DRM 1) VDSM Non-repetitive peak off-state voltage 6100-6600 V 1) VRRM Repetitive peak reverse voltage 6000-6500 V 1) V Non-repetitive peak reverse voltage 6100-6600 V RSM MAXIMUM OTHER RATINGS UNITS LIMITS 2) I Maximum average on-state current, T = 85C 240 A T(AV)M C 2) IT(AV)M Maximum average on-state current. TC = 100C 170 A 2) IT(RMS)M Nominal RMS on-state current, TC = 85C 376 A I D.C. on-state current, T = 55C 458 A T(d.c.) C 3) ITSM Peak non-repetitive surge tp = 10 ms, VRM = 60%VRRM 4.40 kA 3) I 4.00 kA TSM2 Peak non-repetitive surge tp = 10 ms, VRM 10V 2 2 3) 2 I t I t capacity for fusing t = 10 ms, V = 60%V 80.0 kA s p RM RRM 2 2 3) 2 I t I t capacity for fusing t = 10 ms, V 10 V 96.8 kA s p RM 4) (di/dt) Critical rate of rise of on-state current (non-repetitive) 500 A/s cr V Peak reverse gate voltage 5 V RGM PGM Peak forward gate power 4 W 5) VISOL Isolation Voltage 3000 V Tvj op Operating temperature range -40 to +125 C T Storage temperature range -40 to +50 C stg Notes: 1) De-rating factor of 0.13% per C is applicable for T below 25C. vj 2) Single phase 50 Hz, 180 half-sinewave. 3) Half-sinewave, 125C T initial. vj 4) V = 67% V , I = 2A, di /dt 2A/s, T = 125C. D DRM FG g C 5) AC RMS voltage, 50 Hz, 1min test th Rating Report. Type MCC240-60io2 to MCC240-65io2 Issue 2 Page 1 of 11 8 September 2020 Dual Thyristor Module Type MCC240-60io2 to MCC240-65io2 Issue 2 Characteristics 1) PARAMETER MIN. TYP. MAX. TEST CONDITIONS UNITS VTM Maximum peak on-state voltage - - 2.80 ITM = 785 A, Tvj = 25C V V Threshold voltage - - 1.10 V T0 rT Slope resistance - - 2.50 m (dv/dt)cr Critical rate of rise of off-state voltage - - 1000 VD = 67% VDRM, linear ramp, Gate o/c V/s IDRM Peak off-state current - - 150 Rated VDRM mA I Peak reverse current - - 150 Rated V mA RRM RRM VGT Gate trigger voltage - - 2.5 V Tvj = 25C, VD = 12 V, IT = 3 A IGT Gate trigger current - - 300 mA V Gate non-trigger voltage 0.35 - - 67% V V GD DRM IL Latching current - - 1000 VD = 12 V, IFG = 2A, tGP = 50s, Tvj = 25C mA IH Holding current - - 300 VD = 12 V, Gate o/c, Tvj = 25C mA IFG = 2 A, tr = 50 s, VD = 40%VDRM, tgd Gate controlled turn-on delay time - - 3.50 s I = I , di/dt 2A/s, T = 25C TM TAV vj Q Recovered Charge - - 4100 C rr Qra Recovered Charge, 25% chord - - 2600 C I = 1000 A, t = 1 ms, di/dt = 5A/s, TM p V = 100 V R Irm Reverse recovery current - - 104 A t Reverse recovery time, 25% chord - - 50 s rr ITM = 240A, tp = 1 ms, di/dt = 10 A/s, t Turn-off time - - 630 s q V = 100 V, V = 67%V , dv /dt = 50 V/s R DR DRM D - - 0.068 Single Arm K/W RthJC Thermal resistance, junction to case - - 0.034 Whole Module K/W - - 0.020 Single Arm K/W R Thermal resistance, case to heatsink thCH - - 0.010 Whole Module K/W F Mounting force (to heatsink) - 6.00 - Nm 1 2) F Mounting force (to terminals) - 12.00 - Nm 2 W Weight - 1500 - g t Notes: 1) Unless otherwise indicated T =125C. vj 2) Screws must be lubricated. th Rating Report. Type MCC240-60io2 to MCC240-65io2 Issue 2 Page 2 of 11 8 September 2020