th Date:- 9 May, 2013 Data Sheet Issue:- A1 Provisional Data Rectifier Diode Types W5984T 360 and W5984T 400 Development Type No.: WX205T 400 Absolute Maximum Ratings MAXIMUM VOLTAGE RATINGS UNITS LIMITS V Repetitive peak reverse voltage, (note 1) 3600-4000 V RRM V Non-repetitive peak reverse voltage, (note 1) 3700-4100 V RSM MAXIMUM OTHER RATINGS UNITS LIMITS I Maximum average forward current, T =55C, (note 2) 5984 A F(AV)M sink I Maximum average forward current. T =100C, (note 2) 4230 A F(AV)M sink I Maximum average forward current. T =100C, (note 3) 2290 A F(AV)M sink I Nominal RMS forward current, T =25C, (note 2) 10930 A F(RMS)M sink I D.C. forward current, T =25C, (note 4) 9850 A F(d.c.) sink I Peak non-repetitive surge t =10ms, V =60%V , (note 5) 62.0 kA FSM p rm RRM I 68.0 kA Peak non-repetitive surge t =10ms, V 10V, (note 5) FSM2 p rm 2 2 6 2 It I t capacity for fusing t =10ms, V =60%V , (note 5) 19.210 A s p rm RRM 2 2 6 2 I t 23.110 A s I t capacity for fusing t =10ms, V 10V, (note 5) p rm T Operating temperature range -40 to +160 C j op T Storage temperature range -55 to +160 C stg Notes:- 1) De-rating factor of 0.13% per C is applicable for T below 25C. j 2) Double side cooled, single phase 50Hz, 180 half-sinewave. 3) Cathode side cooled, single phase 50Hz, 180 half-sinewave. 4) Double side cooled. 5) Half-sinewave, 160C T initial. j Provisional Data Sheet. Types W5984T 360 & W5984T 400 Issue A1 Page 1 of 9 May, 2013 Rectifier Diode Types W5984T 360 & W5984T 400 Characteristics PARAMETER MIN. TYP. MAX. TEST CONDITIONS (Note 1) UNITS V Maximum peak forward voltage - - 1.25 I=5000A V FM FM V Maximum peak forward voltage - - 2.12 I=15400A V FM FM V Threshold voltage - - 0.758 V T0 Valid from 2000A to 6000A r Slope resistance - - 0.097 m T I Peak reverse current - - 100 Rated V mA RRM RRM Q Recovered charge - 10000 11200 C rr Q Recovered charge, 50% Chord - 6700 - C ra I =2000A, t =2000s, di/dt=10A/s, TM p V =100V r I Reverse recovery current - 285 - A rm t Reverse recovery time, 50% chord - 47 - s rr - - 0.008 Double side cooled K/W R Thermal resistance, junction to heatsink - - 0.013 Anode side cooled K/W thJK - - 0.020 Cathode side cooled K/W F Mounting force 60 - 70 Note 2 kN - 1.15 - Outline option TJ W Weight Kg t - 1.70 - Outline option TE Notes:- 1) Unless otherwise indicated T =160C. j 2) For other clamp forces, please consult factory. Provisional Data Sheet. Types W5984T 360 & W5984T 400 Issue A1 Page 2 of 9 May, 2013