Surface Mount Multilayer Ceramic Chip Capacitors (SMD MLCCs) High Temperature 175C, X7R Dielectric, 16 200 VDC (Industrial Grade) Overview KEMETs High Temperature X7R Dielectric capacitors Concerned with flex cracks resulting from excessive stresses are formulated and designed for extreme temperature produced during board flexure and thermal cycling These applications. Constructed of a robust and proprietary base devices are available with KEMET s Flexible termination metal electrode (BME) dielectric system, these devices are technology which inhibits the transfer of board stress to capable of reliable operation in temperatures up to 175C. the rigid ceramic body, therefore mitigating flex cracks Providing an attractive combination of performance and which can result in low IR or short circuit failures. Although robustness in general high temperature applications, High flexible termination technology does not eliminate the Temperature X7R dielectric capacitors are well suited for potential for mechanical damage that may propagate during high temperature bypass and decoupling applications or extreme environmental and handling conditions, it does frequency discriminating circuits where Q and stability of provide superior flex performance over standard termination capacitance characteristics are not critical. They exhibit systems. a predictable change in capacitance with respect to time, voltage and temperature up to 175C. KEMETs High Temperature X7R surface mount MLCCs are manufactured in state of the art ISO/TS 16949:2009 certified facilities and are proven to function reliably in harsh, high temperature and high humidity, down-hole environments. Applications Decoupling Bypass Filtering Transient voltage suppression Ordering Information C 1210 R 225 K 3 R A C T050 Case Rated Failure Specification/ Capacitance Capacitance Packaging/ 1 Ceramic Size Voltage Dielectric Rate/ Termination Finish 1 2 Series Code (pF) Tolerance Grade (C-Spec) ( x ) (VDC) Design 0402 G = 175C First two digits J = 5% 4 = 16 R = X7R A = N/A C = 100% Matte Sn See 0603 with standard represent K = 10% 3 = 25 L = SnPbPackaging 0805 termination significant M = 20% 5 = 50 (5% Pb minimum) C-Spec 1206 R = 175C figures. Third 1 = 100 Ordering 1210 w/ Flexible digit specifies 2 = 200 Options Tabl 1812 termination number of below zeros. 1 Flexible termination option is only available in 0603 (1608 metric) and larger case sizes. Built Into Tomorrow KEMET Electronics Corporation P.O. Box 5928 Greenville, SC 29606 864-963-6300 www.kemet.com C1075 X7R HT SMD 8/9/2021 1Surface Mount Multilayer Ceramic Chip Capacitors (SMD MLCCs) High Temperature 175C, X7R Dielectric, 16 200 VDC (Industrial Grade) Packaging C-Spec Ordering Options Table Packaging Type/ Packaging 2 Unmarked Ordering Code (C-Spec) 1 Bulk Bag Blank Waffle Tray 7292 7 Tape & Reel TU 3 7 Tape & Reel / 2mm pitch 7081 7 Tape & Reel - 50 pcs T050 7 Tape & Reel - 100 pcs T100 7 Tape & Reel - 250 pcs T250 7 Tape & Reel - 500 pcs T500 7 Tape & Reel - 1,000 pcs T1K0 1 Default packaging isBulk Ba. An ordering code C-Spec is not required forBulk Ba packaging. 2 The termsMarke andUnmarke pertain to laser marking option of components. All packaging options labeled asUnmarke will contain capacitors that have not been laser marked. Please contact KEMET if you require a laser marked option. For more information seeCapacitor Markin. Reeling quantities are dependent upon chip size and thickness dimension. When ordering using theT1K0 packaging option, 1812 thru 2225 case size devices with chip thickness of 1.9 mm (nominal) may be shipped on multiple 7 reels or a single 13 reel. Additional reeling or packaging options may be available. Contact KEMET for details. 3 The 2 mm pitch option allows for double the packaging quantity of capacitors on a given reel size. This option is limited to EIA 0603 (1608 metric) case size devices. For more information regarding 2 mm pitch option seeTape & Reel Packaging Informatio. Benefits Operating temperature range of 55C to +175C Available capacitance tolerances of 5%, 10% & 20% Voltage derating not required Non-polar device, minimizing installation concerns Lead (Pb)-free, RoHS and REACH compliant 100% pure matte tin-plated termination finish allowing for Base metal electrode (BME) dielectric system excellent solderability EIA 0402, 0603, 0805, 1206, 1210, and 1812 case sizes SnPb termination finish option available (5% Pb minimum) DC voltage ratings of 16 V, 25 V, 50 V, 100 V, and 200 V Flexible termination option available upon request Capacitance offerings ranging from 2.7 nF to 3.3 F Application Notes X7R dielectric is not recommended for AC line filtering or pulse applications. Voltage derating of these capacitors is not required for application temperatures up to 175C KEMET Electronics Corporation P.O. Box 5928 Greenville, SC 29606 864-963-6300 www.kemet.com C1075 X7R HT SMD 8/9/2021 2