Surface Mount Multilayer Ceramic Chip Capacitors (SMD MLCCs) KPS HT Series, High Temperature 150C, X8L Dielectric, 10 50 VDC (Commercial & Automotive Grade) Overview KEMET Power Solutions High Temperature (KPS HT) dielectric, these devices are capable of reliable operation up stacked capacitors utilize a proprietary lead-frame to 150C and are well suited for high temperature filtering, technology to vertically stack one or two multilayer bypass and decoupling applications. ceramic chip capacitors into a single compact surface mount package. The attached lead-frame mechanically X8L exhibits a predictable change in capacitance with isolates the capacitor(s) from the printed circuit board, respect to time and voltage, and boasts a minimal change in thereby offering advanced mechanical and thermal stress capacitance with reference to ambient temperature up to 125C. performance. Isolation also addresses concerns for Beyond 125C, X8L displays a wider variation in capacitance. audible, microphonic noise that may occur when a bias Capacitance change is limited to 15% from 55C to +125C and voltage is applied. A two-chip stack offers up to double +15, 40% from 125C to 150C. the capacitance in the same or smaller design footprint when compared to traditional surface mount MLCC In addition to Commercial grade, Automotive grade devices devices. Providing up to 10 mm of board flex capability, are available and meet the demanding Automotive Electronics KPS Series capacitors are environmentally friendly and Council s AEC-Q200 qualification requirements. in compliance with RoHS legislation. Combined with X8L Benefits 55C to +150C operating temperature range Reliable and robust termination system EIA 1210 and 2220 case sizes DC voltage ratings of 10 V, 16 V, 25 V, and 50 V Capacitance offerings ranging from 0.47 F up to 47 F Available capacitance tolerances of 10% and 20% Higher capacitance in the same footprint Potential board space savings Advanced protection against thermal and mechanical stress Provides up to 10 mm of board flex capability Ordering Information C 2220 C 476 M 8 N 2 C 7186 Rated Case Size Specification/ Capacitance Capacitance FailureRate/ Packaging/Grade 2 Ceramic Voltage Dielectric Leadframe Finish 1 (x ) Series Code (pF) Tolerance Design (C-Spec) (VDC) 1210 C = Standard Two significant K = 10% 8 = 10 N = X8L 1 = KPS single C = 100% Matte Sn See Packaging 1812 digits and M = 20% 4 = 16 chip stack C-Spec Ordering 2220 number of 3 = 25 2 = KPS double Options Table zeros. 5 = 50 chip stack 1 Double chip stacks 2 in the 13th character position of the ordering code) are only available in M (20%) capacitance tolerance. Single chip stacks 1 in the 13th character position of the ordering code) are available in K (10%) or M (20%) tolerances. 2 Additional leadframe finish options may be available. Contact KEMET for details. Built Into Tomorrow KEMET Electronics Corporation KEMET Tower One East Broward Boulevard C1038 X8L KPS 150C SMD 6/28/2021 1 Fort Lauderdale, FL 33301 USA 954-766-2800 www.kemet.comSurface Mount Multilayer Ceramic Chip Capacitors (SMD MLCCs) KPS HT Series, High Temperature 150C, X8L Dielectric, 10 VDC 50 VDC (Commercial & Automotive Grade) Packaging C-Spec Ordering Options Table Packaging/Grade 1 Packaging Type 2 Ordering Code (C-Spec) Commercial Grade 7 Reel (Embossed Plastic Tape)/Unmarked 7186 13 Reel (Embossed Plastic Tape)/Unmarked 7289 Automotive Grade 7 Reel (Embossed Plastic Tape)/Unmarked AUTO 13 Reel (Embossed Plastic Tape)/Unmarked AUTO7289 1 The termsMarke andUnmarke pertain to laser marking option of capacitors. All packaging options labeled asUnmarke will contain capacitors that have not been laser marked. The option to laser mark is not available on these devices. For more information seeCapacitor Markin. 2 For additional Information regardingAUT C-Spec options, seeAutomotive C-Spec Informatio. Benefits cont. Reduces audible, microphonic noise Non-polar device, minimizing installation concerns Extremely low ESR and ESL Tantalum and electrolytic alternative Lead (Pb)-free, RoHS and REACH compliant Commercial and Automotive (AEC-Q200) grades available Capable of Pb-free reflow profiles Applications Typical applications include smoothing circuits, DC/DC converters, power supplies (input/output filters), noise reduction (piezoelectric/mechanical), circuits with a direct battery or power source connection, critical and safety relevant circuits without (integrated) current limitation and any application that is subject to extreme environments such as high temperature, high levels of board flexure and/or temperature cycling. Markets include industrial, aerospace, automotive, and telecom. Qualification/Certification Commercial Grade products are subject to internal qualification. Details regarding test methods and conditions are referenced in Table 4, Performance & Reliability. Automotive Grade products meet or exceed the requirements outlined by the Automotive Electronics Council. Details regarding test methods and conditions are referenced in document AECQ200, Stress Test Qualification for Passive Components. For additional information regarding the Automotive Electronics Council and AECQ200, please visit their website at www.aecouncil.com. Environmental Compliance Lead (Pb)-free, RoHS, and REACH compliant without exemptions. KEMET Electronics Corporation KEMET Tower One East Broward Boulevard C1038 X8L KPS 150C SMD 6/28/2021 2 Fort Lauderdale, FL 33301 USA 954-766-2800 www.kemet.com