Surface Mount Multilayer Ceramic Capacitors (SMD MLCCs) for High Power Applications HiQ-CBR Series, C0G Dielectric, Low ESR 6.3 500 VDC, 1 MHz 50 GHz (RF & Microwave) Overview KEMETs CBR Series surface mount multilayer ceramic capacitors (MLCCs) in C0G dielectric feature a robust and exceptionally stable copper electrode dielectric system that offers excellent low loss performance (high Q). These reference to ambient temperature. Capacitance change is devices provide extremely low ESR and high self-resonance limited to 30 ppm/C from 55C to +125C. characteristics, and are well-suited for resonant circuit applications or those where Q and stability of capacitance CBR Series devices are suitable for many circuit applications characteristics are required. CBR Series capacitors including RF power amplifiers, mixers, oscillators, low noise exhibit no change in capacitance with respect to time and amplifiers, filter networks, antenna tuning, timing circuits, voltage, and boast a negligible change in capacitance with delay lines, and MRI imaging coils. Benefits High Q and low ESR High SRF High thermal stability 1 MHz to 50 GHz frequency range O p e r a ti n g te m p e r a t u r e r a n g e of 5 5 C to +125 C Base metal electrode (BME) dielectric system Pb-free and RoHS compliant 0201, 0402, 0603, and 0805 case sizes (inches) DC voltage ratings of 6.3 V, 10 V, 25 V, 50 V, 100 V, 200 V, 250 V, and 500 V Capacitance offerings ranging from 0.1 pF up to 100 pF Ordering Information CBR 02 C 330 F 9 G A C Rated Packaging/ Case Size S p e c i fi ca ti on / Capacitance Capacitance Termination Series Voltage Dielectric Termination Finish Grade (x ) Series Code (pF) Tolerance Style 1 (VDC) (C-Spec) CBR 02 = 0201 C = Standard Tw o s i g n i fi c a n t d i g i t s A = 0.05 pF 9 = 6.3 V G = C0G A = N/A C = 100% Matte Sn Blank = 04 = 0402 and number of zeros B = 0.1 pF 8 = 10 V 7 Reel 06 = 0603 Use 9 for 1.0 9.9 pF C = 0.25 pF 3 = 25 V Unmarked 08 = 0805 Use 8 for 0.1 0.99 pF D = 0.5 pF 5 = 50 V e.g., 2.2 pF = 229 F = 1% 1 = 100 V e.g., 0.5 pF = 508 G = 2% 2 = 200 V J = 5% A = 250 V C = 500 V 1 When ordering CBR Series devices, asuffi orC-Spe is not required to indicate a 7 reel packaging option. CBR devices are only available and shipped on 7 reels (paper tape). Bulk bag and cassette packaging options are not available. Please contact KEMET if you have a specific, non-standard packaging requirement. One world. One KEMET KEMET Electronics Corporation KEMET Tower One East Broward Boulevard C1030 C0G CBR 7/9/2019 1 Fort Lauderdale, FL 33301 USA 954-766-2800 www.kemet.comSurface Mount Multilayer Ceramic Capacitors (SMD MLCCs) for High Power Applications HiQ-CBR Series, C0G Dielectric, Low ESR 6.3 500 VDC, 1 MHz 50 GHz (RF & Microwave) Benefits cont. Available capacitance tolerances of 0.05 pF, 0.1 pF, Negligible capacitance change with respect to temperature 0.25 pF, 0.5 pF, 1%, 2%, and 5% No capacitance decay with time No piezoelectric noise Non-polar device, minimizing installation concerns No capacitance change with respect to applied rated DC 100% pure matte tin-plated termination finish allowing for voltage excellent solderability Applications Typical applications include critical timing, tuning, bypass, coupling, feedback, filtering, impedance matching and DC blocking. Field applications include wireless and cellular base stations, wireless LAN, subscriber-based wireless services, wireless broadcast equipment, satellite communications, RF power amplifier (PA) modules, filters, voltage-controlled oscillators (VCOs), PAs, matching networks, RF modules, satellite communications and medical electronics. Qualification RF and microwave products are subject to internal qualification. Details regarding test methods and conditions are referenced in Table 4, Performance & Reliability. Environmental Compliance Pb-free and RoHS compliant. KEMET Electronics Corporation KEMET Tower One East Broward Boulevard C1030 C0G CBR 7/9/2019 2 Fort Lauderdale, FL 33301 USA 954-766-2800 www.kemet.com