Datasheet Brief KTA1550 For full datasheet, click HERE. Dual Channel Active EMI & ESD Suppressor for Ethernet Applications Features Brief Description Enables system designers to comply with: The KTA1550 is a single-chip, highly integrated CMOS solution for Common Mode (CM) noise suppression & CISPR22 and FCC Part 15, Class B transient voltage protection in Ethernet applications. requirements for Radiated and Conducted Emissions The KTA1550 EMI/ESD Suppressor has been architected IEC 61000-4-3 requirements for Radiated and and designed to provide system level ESD protection and Conducted Immunity, Level 3 or higher EMI suppression in Ethernet products, enabling an easier IEC 61000-4-2 ESD (Air Discharge) of 25kV path to system EMC compliance. IEC 61000-4-2 ESD (Contact Discharge) of The KTA1550 utilizes Kinetic Technologies patented 12kV Active Choke technology which offers superior Common Cable Discharge Event (CDE) of 12kV Mode reduction and immunity compared to passive filtering Provides up to 10dB of additional common techniques in Ethernet applications. The adaptive and mode noise suppression over the frequency of continuous suppression operates over the entire Ethernet 1MHz to 125MHz when used with Ethernet signal bandwidth, and it compensates for many variables magnetics that are the source of common mode noise in Ethernet Robust built-in ESD suppressors protect the systems. It also improves the differential-to-common mode Ethernet PHY and improve system ESD balance of the system. This enables system designers to performance meet EMI emissions and EMI immunity requirements from JESD22-A114, ESD, HBM of 8kV the start of the design. Interfaces to standard Ethernet transformers In addition, the KTA1550 includes highly robust ESD/Surge and 10/100/1000 Ethernet PHYs protection diodes to protect the Ethernet PHY from various Uses a single standard power rail (3.3V or 2.5V) transient overvoltage events. These are built using Open drain output stage that can be biased Kinetics proprietary design and layout techniques to safely from 1.8V to 3.3V using transformer center-tap deal with very high current densities in a CMOS process supply as needed based on choice of Ethernet without creating voltage and/or thermal overstress that PHY. causes damage to the device. Flow-through routing for ease of board layout Each KTA1550 supports two twisted pair interfaces. Typical power consumption of 90mW. 10/100 applications require one KTA1550 device while Low power mode available 10/100/1000 applications require two KTA1550 devices. Industrial temperature range (-40C to +85C) The KTA1550 is available in a small footprint 16-pin QSOP or 16-pin TDFN 4mm x 2.5mm Reduction of Hazardous Substance (RoHS) compliant package. Applications Ethernet systems requiring additional CM suppression to meet EMC Class B emissions or Ordering Information higher EMI immunity requirements and ESD protection Operating 1 Part Number Marking Package PoE and Non-PoE Ethernet systems Temperature VoIP Phones, IP Cameras, WAPs, Routers, 16-Pin QSOP KTA1550ESQ-TR LMYWZ -40C to +85C Switches 0.65mm pitch Set Top Boxes, Networked Printers and 16-Pin TDFN Appliances, Desktop and Laptop Computers KTA1550EDS-TR LMYWZ -40C to +85C 0.5mm pitch 1. YWZ is the date code and assembly code. August 2018 - Revision 04e Page 1 Company Confidential Datasheet Brief KTA1550 Typical Applications TX+ 10/100/1000 RJ45 ETHERNET TX- 10/100 PHY RJ45 ETHERNET RX+ PHY RX- KTA1550 KTA1550 KTA1550 Kinetic Technologies cannot assume responsibility for use of any circuitry other than circuitry entirely embodied in a Kinetic Technologies product. No intellectual property or circuit patent licenses are implied. Kinetic Technologies reserves the right to change the circuitry and specifications without notice at any time. August 2018 - Revision 04e Page 2 Company Confidential