AA2214QBS/D Kingbright

AA2214QBS/D 2.2 x 1.4 mm Surface Mount LED Lamp DESCRIPTIONS PACKAGE DIMENSIONS The Blue source color devices are made with InGaN Light Emitting Diode Electrostatic discharge and power surge could damage the LEDs It is recommended to use a wrist band or anti-electrostatic glove when handling the LEDs All devices, equipments and machineries must be electrically grounded FEATURES 2.2 mm x 1.4 mm, 1.3 mm high Low power consumption Available on tape and reel Package: 2000 pcs / reel Moisture sensitivity level: 3 RoHS compliant APPLICATIONS Backlight Status indicator Home and smart appliances RECOMMENDED SOLDERING PATTERN (units : mm tolerance : 0.1) Wearable and portable devices Healthcare applications ATTENTION Observe precautions for handling electrostatic discharge sensitive devices Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is 0.2(0.008 ) unless otherwise noted. 3. The specifications, characteristics and technical data described in the datasheet are subject to change without prior notice. 4. The device has a single mounting surface. The device must be mounted according to the specifications. SELECTION GUIDE 2 1 Iv (mcd) 20mA Viewing A ngle Emitting Color Part Number Lens Type (Material) Min. Typ. 2 1/2 Blue (InGaN) AA2214QBS/D Water Clear 80 150 120 Notes: 1. 1/2 is the angle from optical centerline where the luminous intensity is 1/2 of the optical peak value. 2. Luminous intensity / luminous flux: +/-15%. 3. Luminous intensity value is traceable to CIE127-2007 standards. Page 1 / 4 2019 Kingbright. All Rights Reserved. Spec No: DSAK2998 / 1201005898 Rev No: V.8B Date: 01/08/2019 AA2214QBS/D ELECTRICAL / OPTICAL CHARACTERISTICS at T =25C A Value Parameter Symbol Emitting Color Unit Typ. Max. Wavelength at Peak Emission I = 20mA Blue 460 - nm F peak 1 Dominant Wavelength I = 20mA Blue 465 - nm F dom Spectral Bandwidth at 50% REL MAX Blue 25 - nm I = 20mA F Capacitance C Blue 100 - pF 2 Forward Voltage I = 20mA V Blue 3.3 4 V F F Reverse Current (V = 5V) I Blue - 50 A R R Notes: 1. The dominant wavelength ( d) above is the setup value of the sorting machine. (Tolerance d : 1nm. ) 2. Forward voltage: 0.1V. 3. Wavelength value is traceable to CIE127-2007 standards. 4. Excess driving current and / or operating temperature higher than recommended conditions may result in severe light degradation or premature failure. ABSOLUTE MAXIMUM RATINGS at T =25C A Parameter Symbol Value Unit Power Dissipation P 120 mW D Reverse Voltage V 5 V R Junction Temperature T 115 C j Operating Temperature T -40 to +85 C op Storage Temperature T -40 to +85 C stg DC Forward Current I 30 mA F 1 Peak Forward Current I 150 mA FM Electrostatic Discharge Threshold (HBM) 250 V - Notes: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. 2. Relative humidity levels maintained between 40% and 60% in production area are recommended to avoid the build-up of static electricity Ref JEDEC/JESD625-A and JEDEC/J-STD-033. Page 2 / 4 2019 Kingbright. All Rights Reserved. Spec No: DSAK2998 / 1201005898 Rev No: V.8B Date: 01/08/2019