AA3528LSECKT/J4 Kingbright

AA3528LSECKT/J4 3.5 x 2.8 mm Surface Mount LED Lamp DESCRIPTIONS PACKAGE DIMENSIONS The Orange source color devices are made with AlGaInP Light Emitting Diode. Electrostatic discharge and power surge could damage the LEDs It is recommended to use a wrist band or anti-electrostatic glove when handling the LEDs All devices, equipments and machineries must be electrically grounded FEATURES Single color Suitable for all SMD assembly and solder process Available on tape and reel Ideal for backlighting Package: 2000 pcs / reel Moisture sensitivity level: 3 RoHS compliant APPLICATIONS Backlight Status indicator RECOMMENDED SOLDERING PATTERN (units : mm tolerance : 0.1) Home and smart appliances Wearable and portable devices Healthcare applications ATTENTION Observe precautions for handling electrostatic discharge sensitive devices Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is 0.25(0.01 ) unless otherwise noted. 3. The specifications, characteristics and technical data described in the datasheet are subject to change without prior notice. 4. The device has a single mounting surface. The device must be mounted according to the specifications. SELECTION GUIDE 2 1 Iv (mcd) 2mA Viewing A ngle Emitting Color Part Number Lens Type (Material) Min. Typ. 2 1/2 120 220 AA3528LSECKT/J4 Super Bright Orange Water Clear 120 (AlGaInP) *30 *60 Notes: 1. 1/2 is the angle from optical centerline where the luminous intensity is 1/2 of the optical peak value. 2. Luminous intensity / luminous flux: +/-15%. * Luminous intensity value is traceable to CIE127-2007 standards. Page 1 / 4 2017 Kingbright. All Rights Reserved. Spec No: DSAO7531 / 1201009174 Rev No: V.2A Date: 06/02/2017 AA3528LSECKT/J4 ELECTRICAL / OPTICAL CHARACTERISTICS at T =25C A Value Parameter Symbol Emitting Color Unit Typ. Max. Wavelength at Peak Emission I = 2mA Super Bright Orange 611 - nm F peak 1 Dominant Wavelength I = 2mA Super Bright Orange 605 - nm F dom Spectral Bandwidth at 50% REL MAX Super Bright Orange 17 - nm I = 2mA F Capacitance C Super Bright Orange 27 - pF 2 Forward Voltage I = 2mA V Super Bright Orange 1.8 2.1 V F F Reverse Current (V = 5V) I Super Bright Orange - 10 uA R R Temperature Coefficient of peak TC Super Bright Orange 0.13 - nm/C peak I = 2mA, -10C T 85C F Temperature Coefficient of dom TC Super Bright Orange 0.06 - nm/C dom I = 2mA, -10C T 85C F Temperature Coefficient of V F TC Super Bright Orange -2.0 - mV/C V I = 2mA, -10C T 85C F Notes: 1. The dominant wavelength ( d) above is the setup value of the sorting machine. (Tolerance d : 1nm. ) 2. Forward voltage: 0.1V. 3. Wavelength value is traceable to CIE127-2007 standards. 4. Excess driving current and / or operating temperature higher than recommended conditions may result in severe light degradation or premature failure. ABSOLUTE MAXIMUM RATINGS at T =25C A Parameter Symbol Value Unit Power Dissipation P 140 mW D Reverse Voltage V 5 V R Junction Temperature T 115 C j Operating Temperature T -40 to +85 C op Storage Temperature T -40 to +85 C stg DC Forward Current I 50 mA F 1 Peak Forward Current I 150 mA FM Electrostatic Discharge Threshold (HBM) 3000 V - 2 Thermal Resistance (Junction / Ambient) R 260 C/W th JA 2 Thermal Resistance (Junction / Solder point) R 160 C/W th JS Notes: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. 2 2. R ,R Results from mounting on PC board FR4 (pad size 16 mm per pad). th JA th JS 3. Relative humidity levels maintained between 40% and 60% in production area are recommended to avoid the build-up of static electricity Ref JEDEC/JESD625-A and JEDEC/J-STD-033. Page 2 / 4 2017 Kingbright. All Rights Reserved. Spec No: DSAO7531 / 1201009174 Rev No: V.2A Date: 06/02/2017