AA4040SRSYKCT-R Kingbright

AA4040SRSYKCT-R 4.0 x 4.0 mm Right Angle Surface Mount LED Lamp DESCRIPTIONS PACKAGE DIMENSIONS The Super Bright Red source color devices are made Red with Gallium Aluminum Arsenide Red Light Emitting Diode The Super Bright Yellow device is made with AlGaInP Yellow (on GaAs substrate) light emitting diode chip Electrostatic discharge and power surge could damage the LEDs It is recommended to use a wrist band or anti-electrostatic glove when handling the LEDs All devices, equipments and machineries must be electrically grounded FEATURES Suitable for all SMD assembly and solder process Available on tape and reel Ideal for backlighting Package: 500 pcs / reel Moisture sensitivity level: 3 RoHS compliant APPLICATIONS RECOMMENDED SOLDERING PATTERN (units : mm tolerance : 0.1) Backlight Status indicator Home and smart appliances Wearable and portable devices Healthcare applications ATTENTION Observe precautions for handling electrostatic discharge sensitive devices Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is 0.25(0.01 ) unless otherwise noted. 3. The specifications, characteristics and technical data described in the datasheet are subject to change without prior notice. 4. The device has a single mounting surface. The device must be mounted according to the specifications. SELECTION GUIDE 2 1 Iv (mcd) 20mA Viewing A ngle Emitting Color Part Number Lens Type (Material) Min. Typ. 2 1/2 80 200 Super Bright Red (GaAlAs) *20 *60 AA4040SRSYKCT-R Water Clear 120 100 250 Super Bright Yellow (AlGaInP) *100 *250 Notes: 1. 1/2 is the angle from optical centerline where the luminous intensity is 1/2 of the optical peak value. 2. Luminous intensity / luminous flux: +/-15%. * Luminous intensity value is traceable to CIE127-2007 standards. Page 1 / 4 2019 Kingbright. All Rights Reserved. Spec No: DSAK6597 / 1201004349 Rev No: V.2A Date: 11/06/2019 AA4040SRSYKCT-R ELECTRICAL / OPTICAL CHARACTERISTICS at T =25C A Value Parameter Symbol Emitting Color Unit Typ. Max. Super Bright Red 655 Wavelength at Peak Emission I = 20mA - nm F peak Super Bright Yellow 590 Super Bright Red 640 1 Dominant Wavelength I = 20mA - nm F dom Super Bright Yellow 590 Spectral Bandwidth at 50% REL MAX Super Bright Red 20 - nm I = 20mA Super Bright Yellow 20 F Super Bright Red 45 Capacitance C - pF Super Bright Yellow 20 Super Bright Red 1.85 2.5 2 Forward Voltage I = 20mA V V F F Super Bright Yellow 2 2.5 Notes: 1. The dominant wavelength ( d) above is the setup value of the sorting machine. (Tolerance d : 1nm. ) 2. Forward voltage: 0.1V. 3. Wavelength value is traceable to CIE127-2007 standards. 4. Excess driving current and / or operating temperature higher than recommended conditions may result in severe light degradation or premature failure. ABSOLUTE MAXIMUM RATINGS at T =25C A Value Parameter Symbol Unit Super Bright Red Super Bright Yellow Power Dissipation P 75 75 mW D Junction Temperature T 115 115 C J Operating Temperature T -40 To +85 C op Storage Temperature T -40 To +85 C stg DC Forward Current I 30 30 mA F 1 Peak Forward Current I 155 175 mA FM Electrostatic Discharge Threshold (HBM) 3000 3000 V - Notes: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. 2. Relative humidity levels maintained between 40% and 60% in production area are recommended to avoid the build-up of static electricity Ref JEDEC/JESD625-A and JEDEC/J-STD-033. Page 2 / 4 2019 Kingbright. All Rights Reserved. Spec No: DSAK6597 / 1201004349 Rev No: V.2A Date: 11/06/2019