AAA3528AVU/SURKCGKCT Kingbright

AAA3528AVU/SURKCGKCT Single Level Surface Mount CBI DESCRIPTIONS PACKAGE DIMENSIONS z The Hyper Red source color devices are made with AlGaInP on GaAs substrate Light Emitting Diode z The Green source color devices are made with AlGaInP on GaAs substrate Light Emitting Diode z Electrostatic discharge and power surge could damage the LEDs z It is recommended to use a wrist band or anti-electrostatic glove when handling the LEDs z All devices, equipments and machineries must be electrically grounded FEATURES z Surface mount type z Compatible with automatic placement equipment z Compatible with infrared and vapor phase solder processes z Black case enhances contrast ratio z Housing material meets UL94V-0 flammability rating RECOMMENDED SOLDERING PATTERN (units : mm tolerance : 0.1) z Lens material meets UL94-HB flammability rating z Moisture sensitivity level: 3 z RoHS compliant APPLICATIONS z Used as indicators of indicating the Degree, Functions, Positions etc z Electronic Test & Measurement Instruments z Communications Testing Equipment ATTENTION Notes: 1. All dimensions are in millimeters (inches). Observe precautions for handling 2. Tolerance is 0.25(0.01 ) unless otherwise noted. electrostatic discharge sensitive devices 3. The specifications, characteristics and technical data described in the datasheet are subject to change without prior notice. 4. The device has a single mounting surface. The device must be mounted according to the specifications. SELECTION GUIDE 2 1 Iv (mcd) 20mA Viewing Angle Emitting Color Part Number Lens Type (Material) Min. Typ. 21/2 12 40 Hyper Red (AlGaInP) AAA3528AVU/SURKCGKCT Water Clear 60 8 20 Green (AlGaInP) Notes: 1. 1/2 is the angle from optical centerline where the luminous intensity is 1/2 of the optical peak value. 2. Luminous intensity / luminous flux: +/-15%. 3. Luminous intensity value is traceable to CIE127-2007 standards. Page 1 / 6 2018 Kingbright. All Rights Reserved. Spec No: DSAO9956 / 1102015799 Rev No: V.4B Date: 09/03/2018 AAA3528AVU/SURKCGKCT ELECTRICAL / OPTICAL CHARACTERISTICS at T =25C A Value Parameter Symbol Emitting Color Unit Typ. Max. Hyper Red 645 Wavelength at Peak Emission I = 20mA - nm F peak Green 574 Hyper Red 630 1 Dominant Wavelength I = 20mA - nm F dom Green 570 Spectral Bandwidth at 50% REL MAX Hyper Red 28 - nm I = 20mA Green 20 F Hyper Red 35 Capacitance C - pF Green 15 Hyper Red 1.95 2.5 2 Forward Voltage I = 20mA V V F F Green 2.1 2.5 Hyper Red 10 Reverse Current (V = 5V) I - uA R R Green 10 Notes: 1. The dominant wavelength ( d) above is the setup value of the sorting machine. (Tolerance d : 1nm. ) 2. Forward voltage: 0.1V. 3. Wavelength value is traceable to CIE127-2007 standards. 4. Excess driving current and / or operating temperature higher than recommended conditions may result in severe light degradation or premature failure. ABSOLUTE MAXIMUM RATINGS at T =25C A Value Parameter Symbol Unit Hyper Red Green Power Dissipation P 75 75 mW D Reverse Voltage V 5 5 V R Junction Temperature T 115 115 C J Operating Temperature T -40 To +85 C op Storage Temperature T -40 To +100 C stg DC Forward Current I 30 30 mA F 1 Peak Forward Current I 185 150 mA FM Electrostatic Discharge Threshold (HBM) 3000 3000 V - Notes: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. 2. Relative humidity levels maintained between 40% and 60% in production area are recommended to avoid the build-up of static electricity Ref JEDEC/JESD625-A and JEDEC/J-STD-033. Page 2 / 6 2018 Kingbright. All Rights Reserved. Spec No: DSAO9956 / 1102015799 Rev No: V.4B Date: 09/03/2018