AAA3528RBGS/08-09 Kingbright

AAA3528RBGS/08-09 3.2 x 2.8 mm Surface Mount LED Lamp DESCRIPTIONS PACKAGE DIMENSIONS The Hyper Red source color devices are made with AlGaInP on GaAs substrate Light Emitting Diode The Blue source color devices are made with InGaN Light Emitting Diode The Green source color devices are made with InGaN on Sapphire Light Emitting Diode Electrostatic discharge and power surge could damage the LEDs It is recommended to use a wrist band or anti-electrostatic glove when handling the LEDs All devices, equipments and machineries must be electrically grounded FEATURES Suitable for all SMD assembly and solder process Available on tape and reel Package: 2000 pcs / reel Moisture sensitivity level: 3 Halogen-free RECOMMENDED SOLDERING PATTERN RoHS compliant (units : mm tolerance : 0.1) APPLICATIONS Backlight Status indicator Home and smart appliances Wearable and portable devices Healthcare applications ATTENTION Observe precautions for handling electrostatic discharge sensitive devices Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is 0.2(0.008 ) unless otherwise noted. 3. The specifications, characteristics and technical data described in the datasheet are subject to change without prior notice. 4. The device has a single mounting surface. The device must be mounted according to the specifications. SELECTION GUIDE 2 1 Iv (mcd) 20mA Viewing Angle Emitting Color Part Number Lens Type (Material) Min. Typ. 21/2 Hyper Red 55 110 (AlGaInP) AAA3528RBGS/08-09 Water Clear 55 100 Blue (InGaN) 120 400 500 Green (InGaN) Notes: 1. 1/2 is the angle from optical centerline where the luminous intensity is 1/2 of the optical peak value. 2. Luminous intensity / luminous flux: +/-15%. 3. Luminous intensity value is traceable to CIE127-2007 standards. Page 1 / 5 2021 Kingbright. All Rights Reserved. Spec No: DSAP5521 / 1201008391 Rev No: V.5B Date: 01/04/2021 AAA3528RBGS/08-09 ELECTRICAL / OPTICAL CHARACTERISTICS at T =25C A Value Parameter Symbol Emitting Color Unit Typ. Max. Hyper Red 645 Wavelength at Peak Emission I = 20mA Blue 460 - nm F peak Green 515 Hyper Red 630 1 Dominant Wavelength I = 20mA Blue 465 - nm F dom Green 525 Hyper Red 28 Spectral Bandwidth at 50% REL MAX Blue 25 - nm I = 20mA F Green 35 Hyper Red 35 Capacitance C Blue 100 - pF Green 45 Hyper Red 1.95 2.5 2 Forward Voltage I = 20mA V Blue 3.3 4 V F F Green 3.3 4.1 Hyper Red 10 Reverse Current (V = 5V) I Blue - 50 A R R Green 50 Hyper Red 0.14 Temperature Coefficient of peak TC Blue 0.04 - nm/C peak I = 20mA, -10C T 85C F Green 0.05 Hyper Red 0.05 Temperature Coefficient of dom TC Blue 0.03 - nm/C dom I = 20mA, -10C T 85C F Green 0.03 Hyper Red -1.9 Temperature Coefficient of V F TC Blue -2.9 - mV/C V I = 20mA, -10C T 85C F Green -2.9 Notes: 1. The dominant wavelength (d) above is the setup value of the sorting machine. (Tolerance d: 1nm. ) 2. Forward voltage: 0.1V. 3. Wavelength value is traceable to CIE127-2007 standards. 4. Excess driving current and / or operating temperature higher than recommended conditions may result in severe light degradation or premature failure. ABSOLUTE MAXIMUM RATINGS at T =25C A Value Parameter Symbol Unit Hyper Red Blue Green Power Dissipation P 75 120 123 mW D Reverse Voltage V 5 5 5 V R Junction Temperature T 115 115 115 C j Operating Temperature T -40 to +85 C op Storage Temperature T -40 to +85 C stg DC Forward Current I 30 30 30 mA F 1 Peak Forward Current I 185 150 150 mA FM Electrostatic Discharge Threshold (HBM) 3000 250 450 V - 2 Thermal Resistance (Junction / Ambient) R 360 430 420 C/W th JA 2 Thermal Resistance (Junction / Solder point) R 200 270 250 C/W th JS Notes: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. 2 2. R ,R Results from mounting on PC board FR4 (pad size 16 mm per pad). th JA th JS 3. Relative humidity levels maintained between 40% and 60% in production area are recommended to avoid the build-up of static electricity Ref JEDEC/JESD625-A and JEDEC/J-STD-033. Page 2 / 5 2021 Kingbright. All Rights Reserved. Spec No: DSAP5521 / 1201008391 Rev No: V.5B Date: 01/04/2021