X-On Electronics has gained recognition as a prominent supplier of AAAF5060QBFSEEZGS Standard LEDs - SMD across the USA, India, Europe, Australia, and various other global locations. AAAF5060QBFSEEZGS Standard LEDs - SMD are a product manufactured by Kingbright. We provide cost-effective solutions for Standard LEDs - SMD, ensuring timely deliveries around the world.
We are delighted to provide the AAAF5060QBFSEEZGS from our Standard LEDs - SMD category, at competitive rates not only in the United States, Australia, and India, but also across Europe and beyond. A long established and extensive electronic component distribution network has enhanced our global reach and dependability, ensuring cost savings through prompt deliveries worldwide. Client satisfaction is at the heart of our business, where every component counts and every customer matters. Our technical service team is ready to assist you. From product selection to after-sales support, we strive to deliver a seamless and satisfying experience. Are you ready to experience the best in electronic component distribution? Contact X-ON Electronics today and discover why X-On are a preferred choice for the AAAF5060QBFSEEZGS and other electronic components in the Standard LEDs - SMD category and beyond.
5.0mm x 6.0mm SURFACE MOUNT LED LAMP Part Number: AAAF5060QBFSEEZGS ATTENTION Blue OBSERVE PRECAUTIONS Hyper Red FOR HANDLING Green ELECTROSTATIC DISCHARGE SENSITIVE DEVICES Features Description z Chips can be controlled separately. The Blue source color devices are made with InGaN Light z Suitable for all SMT assembly and solder process. Emitting Diode. z Available on tape and reel. The Hyper Red source color devices are made with Al- z Package: 500pcs / reel. GaInP on GaAs substrate Light Emitting Diode. z Moisture sensitivity level : level 3. The Green source color devices are made with InGaN z RoHS compliant. on Sapphire Light Emitting Diode. Static electricity and surge damage the LEDS. It is recommended to use a wrist band or anti-electrostatic glove when handling the LEDs. All devices, equipment and machinery must be electrically grounded. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is 0.25(0.01 ) unless otherwise noted. 3. The specifications, characteristics and technical data described in the datasheet are subject to change without prior notice. 4. The device has a single mounting surface. The device must be mounted according to the specifications. SPEC NO: DSAL0956 REV NO: V.1 DATE: OCT/06/2010 PAGE: 1 OF 8 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: F.F.Zhou ERP: 1201006760 Handling Precautions Compare to epoxy encapsulant that is hard and brittle, silicone is softer and flexible. Although its characteristic significantly reduces thermal stress, it is more susceptible to damage by external mechanical force. As a result, special handling precautions need to be observed during assembly using silicone encapsulated LED products. Failure to comply might lead to damage and premature failure of the LED. 1. Handle the component along the side surfaces by using forceps or appropriate tools. 2. Do not directly touch or handle the silicone lens surface. It may damage the internal circuitry. 3. Do not stack together assembled PCBs containing exposed LEDs. Impact may scratch the silicone lens or damage the internal circuitry. 4. The outer diameter of the SMD pickup nozzle should not exceed the size of the LED to prevent air leaks. The inner diameter of the nozzle should be as large as possible. 5. A pliable material is suggested for the nozzle tip to avoid scratching or damaging the LED surface during pickup. 6. The dimensions of the component must be accurately programmed in the pick-and-place machine to insure precise pickup and avoid damage during production. SPEC NO: DSAL0956 REV NO: V.1 DATE: OCT/06/2010 PAGE: 2 OF 8 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: F.F.Zhou ERP: 1201006760